Durable mechanical properties of unidirectional flax fiber/phenolic composites under hydrothermal aging

2022 ◽  
pp. 109264
Author(s):  
Ming Cai ◽  
Xian Zhang ◽  
Baozhong Sun ◽  
Hitoshi Takagi ◽  
Geoffrey I.N. Waterhouse ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Flax Fiber ◽  
Hydrothermal Aging

Mechanical Property Studies on Flax Fiber Reinforced Basalt Powder Filled Polyester Composite

2020 ◽  
Vol 13 ◽  
Author(s):  
V. Arumugaprabu ◽  
K.Arun Prasath ◽  
S. Mangaleswaran ◽  
M. Manikanda Raja ◽  
R. Jegan
Keyword(s):  
Mechanical Properties ◽  
Mechanical Property ◽  
Natural Fiber ◽  
Tensile Load ◽  
Flax Fiber ◽  
Flexural Properties ◽  
Weight Percentage ◽  
Tensile Impact ◽  
Polyester Composite ◽  
Additional Support

: The objective of this research is to evaluate the tensile, impact and flexural properties of flax fiber and basalt powder filled polyester composite. Flax fiber is one of the predominant reinforcement natural fiber which possess good mechanical properties and addition of basalt powder as a filler provides additional support to the composite. The Composites are prepared using flax fiber arranged in 10 layers with varying weight percentage of the basalt powder as 5 wt.%, 10 wt.%, 15 wt.%, 20 wt.%, 25 wt.% and 30 wt.% respectively. From the results it is inferred that the composite combination 10 Layers of flax / 5 wt.%, basalt Powder absorbs more tensile load of 145 MPa. Also, for the same combination maximum flexural strength is about 60 MPa. Interestingly in the case of impact strength more energy was absorbed by 10 layers of flax and 30 wt.% of basalt powder. In addition, the failure mechanism of the composites also discussed briefly using SEM studies.

scholarly journals Effect of Accelerated Aging on Some Mechanical Properties and Wear of Different Commercial Dental Resin Composites

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2769
Author(s):  
Jonne Oja ◽  
Lippo Lassila ◽  
Pekka K. Vallittu ◽  
Sufyan Garoushi
Keyword(s):  
Mechanical Properties ◽  
Flexural Strength ◽  
Accelerated Aging ◽  
Wear Depth ◽  
Resin Composites ◽  
Expiration Date ◽  
Dental Resin ◽  
Hydrothermal Aging ◽  
Dental Resin Composites

The aim of current in vitro research was to determine the effect of hydrothermal accelerated aging on the mechanical properties and wear of different commercial dental resin composites (RCs). In addition, the effect of expiration date of the composite prior its use was also evaluated. Five commercially available RCs were studied: Conventional RCs (Filtek Supreme XTE, G-aenial Posterior, Denfil, and >3y expired Supreme XTE), bulk-fill RC (Filtek Bulk Fill), and short fiber-reinforced RC (everX Posterior). Three-point flexural test was used for determination of ultimate flexural strength (n = 8). A vickers indenter was used for testing surface microhardness. A wear test was conducted with 15,000 chewing cycles using a dual-axis chewing simulator. Wear pattern was analyzed by a three-dimensional (3D) noncontact optical profilometer. Degree of C=C bond conversion of monomers was determined by FTIR-spectrometry. The specimens were either dry stored for 48 h (37 °C) or boiled (100 °C) for 16 h before testing. Scanning electron microscopy (SEM) was used to evaluate the microstructure of each material. Data were analyzed using ANOVA (p = 0.05). Hydrothermal aging had no significant effects on the surface wear and microhardness of tested RCs (p > 0.05). While flexural strength significantly decreased after aging (p < 0.05), except for G-aenial Posterior, which showed no differences. The lowest average wear depth was found for Filtek Bulk Fill (29 µm) (p < 0.05), while everX Posterior and Denfil showed the highest wear depth values (40, 39 µm) in both conditions. Passing the expiration date for 40 months did not affect the flexural strength and wear of tested RC. SEM demonstrated a significant number of small pits on Denfil’s surface after aging. It was concluded that the effect of accelerated aging may have caused certain weakening of the RC of some brands, whereas no effect was found with one brand of RC. Thus, the accelerated aging appeared to be more dependent on material and tested material property.

scholarly journals Influence of Furfuryl Alcohol Fiber Pre-Treatment on the Moisture Absorption and Mechanical Properties of Flax Fiber Composites

Fibers ◽  
2018 ◽  
Vol 6 (3) ◽  
pp. 59 ◽  
Author(s):  
Yunlong Jia ◽  
Bodo Fiedler
Keyword(s):  
Mechanical Properties ◽  
Furfuryl Alcohol ◽  
Moisture Absorption ◽  
Natural Fiber ◽  
Tensile Tests ◽  
Fiber Composites ◽  
Flax Fiber ◽  
Moisture Resistance ◽  
Structural Applications ◽  
Pre Treatment

Poor moisture resistance of natural fiber reinforced bio-composites is a major concern in structural applications. Many efforts have been devoted to alleviate degradation of bio-composites caused by moisture absorption. Among them, fiber pre-treatment has been proven to be effective. This paper proposes an alternative “green” fiber pretreatment with furfuryl alcohol. Pre-treatments with different parameters were performed and the influence on the mechanical properties of fiber bundles and composites was investigated. Moisture resistance of composites was evaluated by water absorption tests. Mechanical properties of composites with different water contents were analyzed in tensile tests. The results show that furfuryl alcohol pretreatment is a promising method to improve moisture resistance and mechanical properties (e.g., Young’s modulus increases up to 18%) of flax fiber composites.

Effects of Hydrothermal Treatment on the Phase Transformation, Surface Roughness, and Mechanical Properties of Monolithic Translucent Zirconia

2022 ◽  
Author(s):  
CY Zhang ◽  
C Agingu ◽  
H Yang ◽  
H Cheng ◽  
H Yu
Keyword(s):  
Mechanical Properties ◽  
Surface Roughness ◽  
Phase Transformation ◽  
Flexural Strength ◽  
Hydrothermal Treatment ◽  
Cross Sections ◽  
Monoclinic Phase ◽  
Control Group ◽  
Hydrothermal Aging ◽  
Characteristic Strength

SUMMARY Objectives: This study aimed to investigate the effects of hydrothermal treatment on four types of monolithic, translucent, yttria-stabilized, tetragonal zirconia polycrystals (Y-TZPs). Methods and Materials: Two commercially available Y-TZP brands—SuperfectZir High Translucency (Aidite Technology Co, China) and Katana HT (Kuraray Noritake Dental, Japan) were assessed. For each brand of Y-TZP, materials of four coloring types, including noncolored (NC), colored by staining (CS), precolored (PC), and multilayered (ML) specimens were investigated after hydrothermal aging in an autoclave at 134°C/0.2 MPa for 0 (control group), 5, 10, and 20 hours. The tetragonal-to-monoclinic phase transformation, surface roughness, flexural strength, and structural reliability (Weibull analysis) were measured and statistically analyzed (α=0.05). The subsurface microstructure was analyzed with scanning electron microscopy. Results: The group ML exhibited the lowest flexural strength and Weibull characteristic strength among the four coloring types (p&lt;0.05). Slight increases in the monoclinic phase volume, flexural strength, and Weibull characteristic strength were observed after hydrothermal aging (pall&lt;0.05). Regardless of coloring type, no significant effects of aging on the Weibull modulus or surface roughness were found for the tested materials. Compared with the Katana HT cross-sections, the SuperfectZir High Translucency cross-sections exhibited a similar but thicker transformation zone. Conclusions: The coloring procedure and material type were found to affect the mechanical properties and aging resistance of translucent monolithic Y-TZP ceramics. Regardless of the aging time, the surface roughness of the tested Y-TZP ceramics remained unchanged.

Mechanical Properties of P34HB/PLA Binary Blendsafter Thermal-Oxidative and Hydrothermal Aging

2013 ◽  
Vol 647 ◽  
pp. 798-801 ◽  
Author(s):  
Wen Can Xi ◽  
Hong Mei Kang ◽  
Hua Li ◽  
He Zhou Liu ◽  
Wei Jie Wang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Lactic Acid ◽  
Mechanical Behavior ◽  
Poly Lactic Acid ◽  
Hydrothermal Aging ◽  
Weight Percentage ◽  
Lower Ratio

Binary blendscomposed of polyhrdroxyalkanoates (P34HB) and poly(lactic acid) (PLA) with various P34HB weight percentage were preparedby extrusion and compressing molding.Both the thermo-oxidative agingat 80°Cand the hydrothermal aging at 80°C with 80% humidity were performed for 300 h for the P34HB/PLA blends respectively.The mechanical properties of tensile strength and elongation-at-breakrevealed that P34HB/PLA blends possessedthe balanced mechanical properties between P34HB and PLA,theblends with higher ratio of P34HBshowed thedeteriorative mechanical behavior in the aging environment faster than thoseblends with lower ratio of P34HB.

scholarly journals Mechanical and Hydrothermal Aging Behaviour of Polyhydroxybutyrate-Co-Valerate (PHBV) Composites Reinforced by Natural Fibres

Molecules ◽  
2019 ◽  
Vol 24 (19) ◽  
pp. 3538 ◽  
Author(s):  
Karolina Mazur ◽  
Stanisław Kuciel
Keyword(s):  
Mechanical Properties ◽  
Young’S Modulus ◽  
Interfacial Adhesion ◽  
Saline Solution ◽  
Young's Modulus ◽  
Morphological Aspect ◽  
Reinforced Composites ◽  
Wood Fibers ◽  
Hydrothermal Aging ◽  
Biodegradable Composites

Biodegradable composites based on poly (3-hydroxybutyrate-co-3-hydroxyvalerate), reinforced with 7.5% or 15% by weight of wood fibers (WF) or basalt fibers (BF) were fabricated by injection molding. BF reinforced composites showed improvement in all properties, whereas WF composites showed an increase in Young’s modulus values, but a drop in strength and impact properties. When compared with the unmodified polymer, composites with 15% by weight of BF showed an increase of 74% in Young’s modulus and 41% in impact strength. Furthermore, the experimentally measured values of Young’s modulus were compared with values obtained in various theoretical micromechanical models. The Haplin-Kardas model was found to be in near approximation to the experimental data. The morphological aspect of the biocomposites was studied using scanning electron microscopy to obtain the distribution and interfacial adhesion of the fibers. Additionally, biodegradation tests of the biocomposites were performed in saline solution at 40 °C by studying the weight loss and mechanical properties. It was observed that the presence of fibers affects the rate of water absorption and the highest rate was seen for composites with 15% by weight of WF. This is dependent on the nature of the fiber. After both the first and second weeks mechanical properties decreased slightly about 10%.

Sign in / Sign up

Export Citation Format

Share Document