Magneto rotating flow of hybrid nanofluid with entropy generation

2020 ◽  
Vol 183 ◽  
pp. 105093 ◽  
Author(s):  
M. Ijaz Khan ◽  
M.U. Hafeez ◽  
T. Hayat ◽  
M. Imran Khan ◽  
A. Alsaedi
Keyword(s):  
Entropy Generation ◽  
Rotating Flow ◽  
Hybrid Nanofluid

scholarly journals Entropy Generation Analysis and Radiated Heat Transfer in MHD (Al2O3-Cu/Water) Hybrid Nanofluid Flow

Micromachines ◽  
2021 ◽  
Vol 12 (8) ◽  
pp. 887
Author(s):  
Nabeela Parveen ◽  
Muhammad Awais ◽  
Saeed Ehsan Awan ◽  
Wasim Ullah Khan ◽  
Yigang He ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Entropy Generation ◽  
Magnetic Induction ◽  
Axisymmetric Flow ◽  
Computational Method ◽  
Stability And Convergence ◽  
Hybrid Nanofluid ◽  
Physical Factors ◽  
Induction Effect ◽  
Entropy Generation Number

This research concerns the heat transfer and entropy generation analysis in the MHD axisymmetric flow of Al2O3-Cu/H2O hybrid nanofluid. The magnetic induction effect is considered for large magnetic Reynolds number. The influences of thermal radiations, viscous dissipation and convective temperature conditions over flow are studied. The problem is modeled using boundary layer theory, Maxwell’s equations and Fourier’s conduction law along with defined physical factors. Similarity transformations are utilized for model simplification which is analytically solved with the homotopy analysis method. The h-curves upto 20th order for solutions establishes the stability and convergence of the adopted computational method. Rheological impacts of involved parameters on flow variables and entropy generation number are demonstrated via graphs and tables. The study reveals that entropy in system of hybrid nanofluid affected by magnetic induction declines for [...]

scholarly journals Analytical Assessment of (Al2O3–Ag/H2O) Hybrid Nanofluid Influenced by Induced Magnetic Field for Second Law Analysis with Mixed Convection, Viscous Dissipation and Heat Generation

Coatings ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 498
Author(s):  
Wasim Ullah Khan ◽  
Muhammad Awais ◽  
Nabeela Parveen ◽  
Aamir Ali ◽  
Saeed Ehsan Awan ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Viscous Dissipation ◽  
Entropy Generation ◽  
Heat Generation ◽  
Transfer Rate ◽  
Second Law ◽  
Hybrid Nanofluid ◽  
Entropy Generation Number ◽  
Generation Number ◽  
Second Law Analysis

The current study is an attempt to analytically characterize the second law analysis and mixed convective rheology of the (Al2O3–Ag/H2O) hybrid nanofluid flow influenced by magnetic induction effects towards a stretching sheet. Viscous dissipation and internal heat generation effects are encountered in the analysis as well. The mathematical model of partial differential equations is fabricated by employing boundary-layer approximation. The transformed system of nonlinear ordinary differential equations is solved using the homotopy analysis method. The entropy generation number is formulated in terms of fluid friction, heat transfer and Joule heating. The effects of dimensionless parameters on flow variables and entropy generation number are examined using graphs and tables. Further, the convergence of HAM solutions is examined in terms of defined physical quantities up to 20th iterations, and confirmed. It is observed that large λ1 upgrades velocity, entropy generation and heat transfer rate, and drops the temperature. High values of δ enlarge velocity and temperature while reducing heat transport and entropy generation number. Viscous dissipation strongly influences an increase in flow and heat transfer rate caused by a no-slip condition on the sheet.

MHD and nonlinear thermal radiation effects on hybrid nanofluid past a wedge with heat source and entropy generation

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Fazle Mabood ◽  
Anum Shafiq ◽  
Waqar Ahmed Khan ◽  
Irfan Anjum Badruddin
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Heat Source ◽  
Thermal Radiation ◽  
Entropy Generation ◽  
Entropy Generation Rate ◽  
Design Parameters ◽  
Hybrid Nanofluid ◽  
Nonlinear Thermal Radiation ◽  
Content Type

Purpose This study aims to investigate the irreversibility associated with the Fe3O4–Co/kerosene hybrid-nanofluid past a wedge with nonlinear radiation and heat source. Design/methodology/approach This study reports the numerical analysis of the hybrid nanofluid model under the implications of the heat source and magnetic field over a static and moving wedge with slips. The second law of thermodynamics is applied with nonlinear thermal radiation. The system that comprises differential equations of partial derivatives is remodeled into the system of differential equations via similarity transformations and then solved through the Runge–Kutta–Fehlberg with shooting technique. The physical parameters, which emerges from the derived system, are discussed in graphical formats. Excellent proficiency in the numerical process is analyzed by comparing the results with available literature in limiting scenarios. Findings The significant outcomes of the current investigation are that the velocity field uplifts for higher velocity slip and magnetic strength. Further, the heat transfer rate is reduced with the incremental values of the Eckert number, while it uplifts with thermal slip and radiation parameters. An increase in Brinkmann’s number uplifts the entropy generation rate, while that peters out the Bejan number. The results of this study are of importance involving in the assessment of the effect of some important design parameters on heat transfer and, consequently, on the optimization of industrial processes. Originality/value This study is original work that reports the hybrid nanofluid model of Fe3O4–Co/kerosene.

scholarly journals Entropy generation of a hybrid nanofluid on MHD mixed convection is a lid-driven cavity with partial heating having two rounded corners

2021 ◽  
Vol 321 ◽  
pp. 02004
Author(s):  
Zakaria Korei ◽  
Smail Benissaad
Keyword(s):  
Thermal Conductivity ◽  
Reynolds Number ◽  
Mixed Convection ◽  
Entropy Generation ◽  
Volume Fraction ◽  
Object Oriented ◽  
Reynolds Numbers ◽  
Hybrid Nanofluid ◽  
Driven Cavity ◽  
Partial Heating

This research aims to investigate thermal and flow behaviors and entropy generation of magnetohydrodynamic Al2O3-Cu/water hybrid nanofluid in a lid-driven cavity having two rounded corners. A solver based on C ++ object-oriented language was developed where the finite volume was used. Parameter’s analysis is provided by varying Reynolds numbers (Re), Hartmann numbers (Ha), the volume fraction of hybrid nanofluid (ϕ), radii of the rounded corners. The findings show that reducing the radii of the rounded corners minimizes the irreversibility. Furthermore, the thermal conductivity and dynamic viscosity of hybrid nanofluid contribute to increasing the irreversibility. Finally, the entropy generation is decreased by increasing the Hartman number and increases by rising the Reynolds number.

scholarly journals Entropy Generation and Natural Convection Flow of Hybrid Nanofluids in a Partially Divided Wavy Cavity Including Solid Blocks

Energies ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2942 ◽  
Author(s):  
Ammar I. Alsabery ◽  
Ishak Hashim ◽  
Ahmad Hajjar ◽  
Mohammad Ghalambaz ◽  
Sohail Nadeem ◽  
...  
Keyword(s):  
Entropy Generation ◽  
Convection Flow ◽  
Hybrid Nanofluid ◽  
Bejan Number ◽  
The Finite Element Method ◽  
Governing Equations ◽  
Flow And Heat Transfer ◽  
Hybrid Nanofluids ◽  
Wavy Cavity ◽  
Rayleigh Numbers

The present investigation addressed the entropy generation, fluid flow, and heat transfer regarding Cu-Al 2 O 3 -water hybrid nanofluids into a complex shape enclosure containing a hot-half partition were addressed. The sidewalls of the enclosure are made of wavy walls including cold isothermal temperature while the upper and lower surfaces remain insulated. The governing equations toward conservation of mass, momentum, and energy were introduced into the form of partial differential equations. The second law of thermodynamic was written for the friction and thermal entropy productions as a function of velocity and temperatures. The governing equations occurred molded into a non-dimensional pattern and explained through the finite element method. Outcomes were investigated for Cu-water, Al 2 O 3 -water, and Cu-Al 2 O 3 -water nanofluids to address the effect of using composite nanoparticles toward the flow and temperature patterns and entropy generation. Findings show that using hybrid nanofluid improves the Nusselt number compared to simple nanofluids. In the case of low Rayleigh numbers, such enhancement is more evident. Changing the geometrical aspects of the cavity induces different effects toward the entropy generation and Bejan number. Generally, the global entropy generation for Cu-Al 2 O 3 -water hybrid nanofluid takes places between the entropy generation values regarding Cu-water and Al 2 O 3 -water nanofluids.

MHD Flow of Cu-Al2O3/Water Hybrid Nanofluid in Porous Channel: Analysis of Entropy Generation

2017 ◽  
Vol 377 ◽  
pp. 42-61 ◽  
Author(s):  
Sanatan Das ◽  
Rabindra Nath Jana ◽  
Oluwole Daniel Makinde
Keyword(s):  
Entropy Generation ◽  
Mhd Flow ◽  
Transverse Magnetic ◽  
Porous Channel ◽  
Hybrid Nanofluid ◽  
Bejan Number ◽  
Governing Equations ◽  
Transfer Enhancement ◽  
Entropy Generation Number ◽  
Channel Analysis

In this investigation, a magnetohydrodynamic (MHD) flow of AlO /water nanofluid and Cu-AlO /water hybrid nanofluid through a porous channel is analyzed in the presence of a transverse magnetic field. An exact solution of the governing equations has been obtained in closed form. The entropy generation number and the Bejan number are also obtained. The influences of each of the governing parameters on velocity, temperature, entropy generation and Bejan number are displayed graphically and the physical aspects are discussed. In addition, a comparison of the heat transfer enhancement level due to the suspension of AlO and Cu nanoparticles in water as regular nanofluids and as hybrid Cu-AlO /water nanofluid is reported.

Sign in / Sign up

Export Citation Format

Share Document