Adsorption capacity and removal efficiency of heavy metal ions by Moso and Ma bamboo activated carbons

2012 ◽  
Vol 90 (9) ◽  
pp. 1397-1406 ◽  
Author(s):  
Sheng-Fong Lo ◽  
Song-Yung Wang ◽  
Ming-Jer Tsai ◽  
Lang-Dong Lin
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Adsorption Capacity ◽  
Removal Efficiency ◽  
Heavy Metal Ions ◽  
Activated Carbons ◽  
Ma Bamboo

scholarly journals Comparative Removal of Lead and Nickel Ions onto Nanofibrous Sheet of Activated Polyacrylonitrile in Batch Adsorption and Application of Conventional Kinetic and Isotherm Models

Membranes ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 10
Author(s):  
Muhammad Tahir Amin ◽  
Abdulrahman Ali Alazba ◽  
Muhammad Shafiq
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Adsorption Capacity ◽  
Removal Efficiency ◽  
Heavy Metal Ions ◽  
Optimum Dose ◽  
Infrared Spectrometry ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Adsorption Data

We investigated the adsorption of lead (Pb2+) and nickel (Ni2+) ions by electrospun membranes of polyacrylonitrile (PAN) nanofiber activated with NaHCO3 (PANmod). Analysis by Fourier-transform infrared spectrometry (FTIR), field emission scanning electron microscopy (FE-SEM), and energy dispersive X-ray spectroscopy (EDX) validated the functionalization of PAN nanofibers with NaHCO3, and the successful agglomeration of Pb2+ and Ni2+ onto PANmod. After a rapid uptake of the heavy metal ions (15 min), the equilibrium contact time was attained (60 min) following a linear increase of both adsorption capacity and removal efficiency. PANmod showed a better affinity for Ni2+ than Pb2+. The adsorption on PANmod was best described by the pseudo-second-order kinetic model for both studied models, supporting chemisorption. By varying the solution pH from 2.0 to 9.0, we found that the adsorption capacity followed an increasing trend, reaching a maximum at the pH of 7.0. Despite increasing adsorption capacities, the removal efficiency of both heavy metal ions exhibited a decreasing trend with increase in initial concentrations. The amount of PANmod directly affects the removal efficiency, with 0.7 and 0.2 g being the optimum dose for maximum uptake of Pb2+ and Ni2+, respectively. The Langmuir model fitted well the Pb2+ adsorption data suggesting monolayer adsorption, and the Freundlich model perfectly fitted the Ni2+ adsorption data, indicating heterogeneous adsorption. The estimated values of the mean free energy of adsorption in the D–R isotherm indicated a physical adsorption of both heavy metal ions into the surface of the PANmod.

scholarly journals Removal of Heavy Metal Ions from One- and Two-Component Solutions via Adsorption on N-Doped Activated Carbon

Materials ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 7045
Author(s):  
Justyna Kazmierczak-Razna ◽  
Anetta Zioła-Frankowska ◽  
Piotr Nowicki ◽  
Marcin Frankowski ◽  
Robert Wolski ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Activated Carbon ◽  
Metal Ions ◽  
Adsorption Capacity ◽  
Contact Time ◽  
Heavy Metal Ions ◽  
Activated Carbons ◽  
Chemical Activation ◽  
Phase Contact ◽  
Phase Contact Time

This paper deals with the adsorption of heavy metal ions (Cu2+ and Zn2+) on the carbonaceous materials obtained by chemical activation and ammoxidation of Polish brown coal. The effects of phase contact time, initial metal ion concentration, solution pH, and temperature, as well as the presence of competitive ions in solution, on the adsorption capacity of activated carbons were examined. It has been shown that the sample modified by introduction of nitrogen functional groups into carbon structure exhibits a greater ability to uptake heavy metals than unmodified activated carbon. It has also been found that the adsorption capacity increases with the increasing initial concentration of the solution and the phase contact time. The maximum adsorption was found at pH = 8.0 for Cu(II) and pH = 6.0 for Zn(II). For all samples, better fit to the experimental data was obtained with a Langmuir isotherm than a Freundlich one. A better fit of the kinetic data was achieved using the pseudo-second order model.

Effect of Initial Concentration of Cu2+ on the Adsorption Performance of Hydroxyapatite

2014 ◽  
Vol 989-994 ◽  
pp. 312-315
Author(s):  
Yu Tong Guan ◽  
Shao Hong Wang ◽  
Mei Han Wang ◽  
Zhao Xia Hou ◽  
Xiao Dan Hu ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Heavy Metal ◽  
Metal Ions ◽  
Adsorption Capacity ◽  
Removal Efficiency ◽  
Heavy Metal Ions ◽  
Sol Gel ◽  
Initial Concentration ◽  
Adsorption Performance ◽  
Eds Analysis

Hydroxyapatite (HAP) is an effective adsorbent for removing heavy metal ions. In this study, HAP was prepared by sol-gel method and used for removing Cu2+ from aqueous solution. Initial concentration of Cu2+ in the aqueous solution was evaluated as an important parameter determining uptake. The removal efficiency and the adsorption capacity of HAP for Cu2+ were investigated. EDS analysis indicated the presence of Cu2+ on the HAP surface.

Bioadsorption of Multiple Heavy Metal Ions by Rhizophora Apiculate sp. and Elaesis Guineensis sp.

2017 ◽  
Vol 14 (1) ◽  
pp. 15
Author(s):  
M.B. Nicodemus Ujih ◽  
Mohammad Isa Mohamadin ◽  
Milla-Armila Asli ◽  
Bebe Norlita Mohammed
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Removal Efficiency ◽  
Heavy Metal Ions ◽  
Agricultural Waste ◽  
Living Organism ◽  
Heavy Metal Concentration ◽  
Industrial Area ◽  
Electrochemical Treatment ◽  
Chemical Oxidation

Heavy metal ions contamination has become more serious which is caused by the releasing of toxic water from industrial area and landfill that are very harmful to all living organism especially human and can even cause death if contaminated in small amount of heavy metal concentration. Currently, peoples are using classic method namely electrochemical treatment, chemical oxidation/reduction, chemical precipitation and reverse osmosis to eliminate the metal ions from toxic water. Unfortunately, these methods are costly and not environmentally friendly as compared to bioadsorption method, where agricultural waste is used as biosorbent to remove heavy metals. Two types of agricultural waste used in this research namely oil palm mesocarp fiber (Elaesis guineensis sp.) (OPMF) and mangrove bark (Rhizophora apiculate sp.) (MB) biomass. Through chemical treatment, the removal efficiency was found to improve. The removal efficiency is examined based on four specification namely dosage, of biosorbent to adsorb four types of metals ion explicitly nickel, lead, copper, and chromium. The research has found that the removal efficiency of MB was lower than OPMF; whereas, the multiple metals ions removal efficiency decreased in the order of Pb2+ > Cu2+ > Ni2+ > Cr2+.

Comparative Bio-sorption of Cadmium and Nickel Ions from Aqueous Solution onto Fibers of Date Palm using Fluidized Bed Column

2019 ◽  
Vol 70 (5) ◽  
pp. 1507-1512
Author(s):  
Baker M. Abod ◽  
Ramy Mohamed Jebir Al-Alawy ◽  
Firas Hashim Kamar ◽  
Gheorghe Nechifor
Keyword(s):  
Aqueous Solution ◽  
Heavy Metal ◽  
Metal Ions ◽  
Fluidized Bed ◽  
Removal Efficiency ◽  
Heavy Metal Ions ◽  
Date Palm ◽  
Operating Conditions ◽  
Initial Concentration ◽  
Bed Height

The aim of this study is to use the dry fibers of date palm as low-cost biosorbent for the removal of Cd(II), and Ni(II) ions from aqueous solution by fluidized bed column. The effects of many operating conditions such as superficial velocity, static bed height, and initial concentration on the removal efficiency of metal ions were investigated. FTIR analyses clarified that hydroxyl, amine and carboxyl groups could be very effective for bio-sorption of these heavy metal ions. SEM images showed that dry fibers of date palm have a high porosity and that metal ions can be trapped and sorbed into pores. The results show that a bed height of 6 cm, velocity of 1.1Umf and initial concentration for each heavy metal ions of 50 mg/L are most feasible and give high removal efficiency. The fluidized bed reactor was modeled using ideal plug flow and this model was solved numerically by utilizing the MATLAB software for fitting the measured breakthrough results. The breakthrough curves for metal ions gave the order of bio-sorption capacity as follow: Cd(II)]Ni(II).

scholarly journals Effects of Electronegativity and Hydration Energy on the Selective Adsorption of Heavy Metal Ions by Synthetic NaX Zeolite

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4066
Author(s):  
Xianyuan Fan ◽  
Hong Liu ◽  
Emmanuella Anang ◽  
Dajun Ren
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Adsorption Capacity ◽  
Heavy Metal Ions ◽  
Binary Systems ◽  
Adsorption Mechanism ◽  
Selective Adsorption ◽  
Hydration Energy ◽  
Nax Zeolite ◽  
High Electronegativity

The adsorption capacity of synthetic NaX zeolite for Pb2+, Cd2+, Cu2+ and Zn2+ in single and multi-component systems were investigated. The effects of electronegativity and hydration energy on the selective adsorption, as well as potential selective adsorption mechanism of the NaX zeolite for Pb2+, Cd2+, Cu2+ and Zn2+ were also discussed. The maximum adsorption capacity order of the heavy metals in the single system was Pb2+ > Cd2+ > Cu2+ > Zn2+, and this could be related to their hydration energy and electronegativity. The values of the separation factors (α) and affinity constant (KEL) in different binary systems indicated that Pb2+ was preferentially adsorbed, and Zn2+ presented the lowest affinity for NaX zeolite. The selective adsorption capacities of the metals were in the order, Pb2+ > Cd2+ ≈ Cu2+ > Zn2+. The trend for the selective adsorption of NaX zeolite in ternary and quaternary systems was consistent with that in the binary systems. Pb2+ and Cu2+ reduced the stability of the Si-O-Al bonds and the double six-membered rings in the NaX framework, due to the high electronegativity of Pb2+ and Cu2+ than that of Al3+. The selective adsorption mechanism of NaX zeolite for the high electronegative metal ions could mainly result from the negatively charged O in the Si-O-Al structure of the NaX zeolite, hence heavy metal ions with high electronegativity display a strong affinity for the electron cloud of the oxygen atoms in the Si-O-Al. This study could evaluate the application and efficiency of zeolite in separating and recovering certain metal ions from industrial wastewater.

Electrokinetic Remediation of Heavy Metal Contaminated Soil Using Permeable Reactive Composite Electrodes

2012 ◽  
Vol 518-523 ◽  
pp. 361-368 ◽  
Author(s):  
Rong Bing Fu ◽  
Xin Xing Liu ◽  
Fang Liu ◽  
Jin Ma ◽  
Yu Mei Ma ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Removal Efficiency ◽  
Heavy Metal Ions ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Ph Control ◽  
Electrokinetic Remediation ◽  
Composite Electrodes ◽  
Remediation Process

A new permeable reactive composite electrode (PRCE) attached with a permeable reactive layer (PRL) of Fe0 and zeolite has been developed for soil pH control and the improved removal efficiency of heavy metal ions (Cd, Ni, Pb, Cu) from soil in electrokinetic remediation process. The effects of different composite electrodes on pH control and heavy metal removal efficiency were studied, and changes in the forms of heavy metals moved onto the electrodes were analyzed. The results showed that with acidic/alkaline zeolite added and renewed in time, the composite electrodes could effectively neutralize and capture H+ and OH- produced from electrolysis of the anolyte and catholyte, avoiding or delaying the formation of acidic/alkaline front in tested soil, preventing premature precipitation of heavy metal ions and over-acidification of soil, and thus significantly improved the heavy metal removal efficiency. Fe0 in composite electrodes could deoxidize and stabilize the heavy metal ions. After that capture and immobilization of the pollutants were achieved. The results also showed that, using "Fe0 + zeolite" PRCE in the cathode with timely renewal, after 15-day remediation with a DC voltage of 1.5 V/cm, the total removal rates of Cd, Pb, Cu and Ni were 49.4%, 47.1%, 36.7% and 39.2%, respectively.

scholarly journals Novel ionic surface imprinting technology: design and application for selectively recognizing heavy metal ions

RSC Advances ◽  
2019 ◽  
Vol 9 (5) ◽  
pp. 2431-2440 ◽  
Author(s):  
Fu-Qiang An ◽  
Hu-Fei Li ◽  
Xu-Dong Guo ◽  
Bao-Jiao Gao ◽  
Tuo-Ping Hu ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Adsorption Capacity ◽  
Chemical Stability ◽  
Heavy Metal Ions ◽  
Selectivity Coefficient ◽  
Surface Imprinting ◽  
Technology Design ◽  
Surface Imprinting Technology ◽  
Design And Application

SIPs have good chemical stability and reusability. They could be reused without a significant reduction in adsorption capacity and selectivity coefficient.

Sign in / Sign up

Export Citation Format

Share Document