Influence of confining wall on pressure drop and particle-to-fluid heat transfer in packed beds with small D/d ratios under high Reynolds number

2019 ◽  
Vol 209 ◽  
pp. 115200 ◽  
Author(s):  
Zehua Guo ◽  
Zhongning Sun ◽  
Nan Zhang ◽  
Ming Ding
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Pressure Drop ◽  
High Reynolds Number ◽  
Packed Beds ◽  
High Reynolds

A Numerical Investigation Into the Heat Transfer Performance and Particle Dynamics of a Compressible, Highly Mass Loaded, High Reynolds Number, Particle Laden Flow

2021 ◽  
Author(s):  
Kyle Hassan ◽  
Robert F. Kunz ◽  
David Hanson ◽  
Michael Manahan
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Computational Model ◽  
High Reynolds Number ◽  
Heat Transfer Performance ◽  
Particle Dynamics ◽  
Transfer Performance ◽  
Temperature Distributions ◽  
High Reynolds ◽  
Particle Laden Flow

Abstract In this work, we study the heat transfer performance and particle dynamics of a highly mass loaded, compressible, particle-laden flow in a horizontally-oriented pipe using an Eulerian-Eulerian (two-fluid) computational model. An attendant experimental configuration [1] provides the basis for the study. Specifically, a 17 bar co-flow of nitrogen gas and copper powder are modeled with inlet Reynolds numbers of 3×104, 4.5×104, and 6×104 and mass loadings of 0, 0.5, and 1.0. Eight binned particle sizes were modeled to represent the known powder properties. Significant settling of all particle groups are observed leading to asymmetric temperature distributions. Wall and core flow temperature distributions are observed to agree well with measurements. In high Reynolds number cases, the predictions of the multiphase computational model were satisfactorily aligned with the experimental results. Low Reynolds number model predictions were not as consistent with the experimental measurements.

Row Removal Heat Transfer Study for Pin Fin Arrays

2014 ◽  
Author(s):  
Kathryn L. Kirsch ◽  
Jason K. Ostanek ◽  
Karen A. Thole ◽  
Eleanor Kaufman
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
High Reynolds Number ◽  
Pin Fin ◽  
Heat Transfer Augmentation ◽  
Aspect Ratios ◽  
Pin Fins ◽  
High Reynolds ◽  
Pin Fin Arrays ◽  
Transfer Study

Arrays of variably-spaced pin fins are used as a conventional means to conduct and convect heat from internal turbine surfaces. The most common pin shape for this purpose is a circular cylinder. Literature has shown that beyond the first few rows of pin fins, the heat transfer augmentation in the array levels off and slightly decreases. This paper provides experimental results from two studies seeking to understand the effects of gaps in pin spacing (row removals) and alternative pin geometries placed in these gaps. The alternative pin geometries included large cylindrical pins and oblong pins with different aspect ratios. Results from the row removal study at high Reynolds number showed that when rows four through eight were removed, the flow returned to a fully-developed channel flow in the gap between pin rows. When larger alternative geometries replaced the fourth row, heat transfer increased further downstream into the array.

scholarly journals Aerodynamics and Heat Transfer Investigations on a High Reynolds Number Turbine Cascade

1991 ◽  
Author(s):  
Taher Schobeiri ◽  
Eric McFarland ◽  
Frederick Yeh
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
High Reynolds Number ◽  
Test Facility ◽  
Experimental Investigations ◽  
Turbine Cascade ◽  
Calculation Methods ◽  
Transfer Coefficients ◽  
Pressure Distributions ◽  
High Reynolds

In this report the results of aerodynamic and heat transfer experimental investigations performed in a high Reynolds number turbine cascade test facility are analyzed. The experimental facility simulates the high Reynolds number flow conditions similar to those encountered in the space shuttle main engine. In order to determine the influence of Reynolds number on aerodynamic and thermal behavior of the blades, heat transfer coefficients were measured at various Reynolds numbers using liquid crystal temperature measurement technique. Potential flow calculation methods were used to predict the cascade pressure distributions. Boundary layer and heat transfer calculation methods were used with these pressure distributions to verify the experimental results.

Friction Factor Directly From Roughness Measurements

2001 ◽  
Author(s):  
Elling Sletfjerding ◽  
Jon Steinar Gudmundsson
Keyword(s):  
Reynolds Number ◽  
Pressure Drop ◽  
Power Spectrum ◽  
Friction Factor ◽  
High Reynolds Number ◽  
Gas Flow ◽  
Relative Roughness ◽  
High Reynolds ◽  
Friction Factor Correlation ◽  
Roughness Measurements

Abstract Pressure drop experiments on natural gas flow in 150 mm pipes at 80 to 120 bar pressure and high Reynolds number were carried out for pipes smooth to rough surfaces. The roughness was measured with an accurate stylus instrument and analyzed using fractal methods. Using a similar approach to that of Nikuradse the measured friction factor was related to the measured roughness values. Taking the value of the relative roughness and dividing it by the slope of the power spectrum of the measured roughness, a greatly improved fit with the measured friction factor was obtained. Indeed, a new friction factor correlation was obtained, but now formulated in terms of direct measurement of roughness.

Sign in / Sign up

Export Citation Format

Share Document