Carbon-based solid acid catalyst from de-oiled canola meal for biodiesel production

2011 ◽  
Vol 14 (1) ◽  
pp. 20-26 ◽  
Author(s):  
B.V.S.K. Rao ◽  
K. Chandra Mouli ◽  
N. Rambabu ◽  
A.K. Dalai ◽  
R.B.N. Prasad
Keyword(s):  
Solid Acid ◽  
Solid Acid Catalyst ◽  
Acid Catalyst ◽  
Biodiesel Production ◽  
Canola Meal ◽  
Carbon Based

Investigation of carbon-based solid acid catalyst from Jatropha curcas biomass in biodiesel production

2017 ◽  
Vol 144 ◽  
pp. 10-17 ◽  
Author(s):  
H. Haziratul Mardhiah ◽  
Hwai Chyuan Ong ◽  
H.H. Masjuki ◽  
Steven Lim ◽  
Yean Ling Pang
Keyword(s):  
Jatropha Curcas ◽  
Solid Acid ◽  
Solid Acid Catalyst ◽  
Acid Catalyst ◽  
Biodiesel Production ◽  
Carbon Based

Preparation of a Novel Carbon Based Solid Acid Catalyst for Biodiesel Production via a Sustainable Route

2012 ◽  
Vol 142 (7) ◽  
pp. 869-874 ◽  
Author(s):  
Xue-li Song ◽  
Xiao-bo Fu ◽  
Cheng-wu Zhang ◽  
Wei-ya Huang ◽  
Yi Zhu ◽  
...  
Keyword(s):  
Solid Acid ◽  
Solid Acid Catalyst ◽  
Acid Catalyst ◽  
Biodiesel Production ◽  
Carbon Based

scholarly journals Carbon-based acid catalyst from waste seed shells: preparation and characterization

2015 ◽  
Vol 17 (4) ◽  
pp. 37-41 ◽  
Author(s):  
Li H. Wang ◽  
Hao Liu ◽  
Li Li
Keyword(s):  
Solid Acid ◽  
Solid Acid Catalyst ◽  
Acid Catalyst ◽  
High Density ◽  
Biodiesel Production ◽  
Oh Groups ◽  
Aromatic Carbon ◽  
X Ray ◽  
Polycyclic Aromatic ◽  
Carbon Based

Abstract A carbon-based solid acid catalyst was prepared by the sulfonation of carbonized seed shells of Jatropha curcas (J. curcas L.). The structure of amorphous carbon consisting of polycyclic aromatic carbon sheets attached a high density of acidic SO3H groups (2.0 mmol · g−1) was identified with scanning electron microscopy (SEM), fourier transform infrared (FTIR) spectroscopy, powder X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The performance of the solid acid catalyst was evaluated for biodiesel production in the esterification of oleic acid with methanol. 95.7% yield of biodiesel was obtained after 2 h reaction and the conversions with reused catalyst varied in the range of 95.7% to 95.1%, showing better activity and stability than commercial catalyst amberlyst-46. It was also observed that the prepared catalyst showed enhanced activity in the transesterification of triolein with methanol when compared with other solid acid catalysts. A synergistic effect results from the high density of SO3H groups and the good access of reactants to the acidic sites can be used to explain the excellent catalytic activity, as well as the strong affinity between the hydrophilic reactants and the neutral OH groups bonded to the polycyclic aromatic carbon rings.

Synthesis and Characterization of Heterogeneous Solid Acid Catalyst from Alstonia Scolaris Stalks for Biodiesel Production using Waste Cooking Oil

2020 ◽  
Vol 10 ◽  
Author(s):  
Charishma Venkata Sai Anne ◽  
Karthikeyan S. ◽  
Arun C.
Keyword(s):  
Reaction Time ◽  
Solid Acid ◽  
Solid Acid Catalyst ◽  
Acid Catalyst ◽  
Waste Cooking Oil ◽  
Biodiesel Production ◽  
Wood Biomass ◽  
Waste Wood ◽  
X Ray ◽  
Cooking Oil

Background: Waste biomass derived reusable heterogeneous acid based catalysts are more suitable to overcome the problems associated with homogeneous catalysts. The use of agricultural biomass as catalyst for transesterification process is more economical and it reduces the overall production cost of biodiesel. The identification of an appropriate suitable catalyst for effective transesterification will be a landmark in biofuel sector Objective: In the present investigation, waste wood biomass was used to prepare a low cost sulfonated solid acid catalyst for the production of biodiesel using waste cooking oil. Methods: The pretreated wood biomass was first calcined then sulfonated with H2SO4. The catalyst was characterized by various analyses such as, Fourier-transform infrared spectroscopy (FTIR), Scanning Electron Microscopy (SEM), Energy Dispersive X-Ray Spectroscopy (EDS) and X-ray diffraction (XRD). The central composite design (CCD) based response surface methodology (RSM) was applied to study the influence of individual process variables such as temperature, catalyst load, methanol to oil molar ration and reaction time on biodiesel yield. Results: The obtained optimized conditions are as follows: temperature (165 ˚C), catalyst loading (1.625 wt%), methanol to oil molar ratio (15:1) and reaction time (143 min) with a maximum biodiesel yield of 95 %. The Gas chromatographymass spectrometry (GC-MS) analysis of biodiesel produced from waste cooking oil was showed that it has a mixture of both monounsaturated and saturated methyl esters. Conclusion: Thus the waste wood biomass derived heterogeneous catalyst for the transesterification process of waste cooking oil can be applied for sustainable biodiesel production by adding an additional value for the waste materials and also eliminating the disposable problem of waste oils.

scholarly journals The Effect of Co-solvent on Esterification of Oleic Acid Using Amberlyst 15 as Solid Acid Catalyst in Biodiesel Production

2018 ◽  
Vol 156 ◽  
pp. 03002
Author(s):  
Iwan Ridwan ◽  
Mukhtar Ghazali ◽  
Adi Kusmayadi ◽  
Resza Diwansyah Putra ◽  
Nina Marlina ◽  
...  
Keyword(s):  
Oleic Acid ◽  
Fatty Acid ◽  
Free Fatty Acid ◽  
Solid Acid ◽  
Solid Acid Catalyst ◽  
Acid Catalyst ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Amberlyst 15 ◽  
Acid Esterification

The oleic acid solubility in methanol is low due to two phase separation, and this causes a slow reaction time in biodiesel production. Tetrahydrofuran as co-solvent can decrease the interfacial surface tension between methanol and oleic acid. The objective of this study was to investigate the effect of co-solvent, methanol to oleic acid molar ratio, catalyst amount, and temperature of the reaction to the free fatty acid conversion. Oleic acid esterification was conducted by mixing oleic acid, methanol, tetrahydrofuran and Amberlyst 15 as a solid acid catalyst in a batch reactor. The Amberlyst 15 used had an exchange capacity of 2.57 meq/g. Significant free fatty acid conversion increments occur on biodiesel production using co-solvent compared without co-solvent. The highest free fatty acid conversion was obtained over methanol to the oleic acid molar ratio of 25:1, catalyst use of 10%, the co-solvent concentration of 8%, and a reaction temperature of 60°C. The highest FFA conversion was found at 28.6 %, and the steady state was reached after 60 minutes. In addition, the use of Amberlyst 15 oleic acid esterification shows an excellent performance as a solid acid catalyst. Catalytic activity was maintained after 4 times repeated use and reduced slightly in the fifth use.

Simulation, Case Studies and Optimization of a Biodiesel Process with a Solid Acid Catalyst

2007 ◽  
Vol 5 (1) ◽  
Author(s):  
Alex H West ◽  
Dusko Posarac ◽  
Naoko Ellis
Keyword(s):  
Case Studies ◽  
Solid Acid ◽  
Solid Acid Catalyst ◽  
Fixed Bed ◽  
Acid Catalyst ◽  
Biodiesel Production ◽  
Fixed Bed Reactor ◽  
Rate Of Return ◽  
Manufacturing Cost ◽  
Tax Rate

A commercial process simulator was used to develop a detailed simulation of a biodiesel production process, and carry out case studies and optimization. The simulated process produced biodiesel from a feedstock containing 5 wt.% free fatty acids in a fixed-bed reactor with sulfated-zirconia as an acidic catalyst. Sized unit operation blocks, material and energy flows were used to conduct an economic assessment of the process. Total capital investment, total manufacturing cost, after tax rate-of-return and production cost ($/kg) were all determined for the process. The process was then optimized by maximizing the after tax rate-of-return (ATROR). Based on our previous work, the most economical process for transesterification of waste vegetable oil at the scale of 8000 metric tones/yr of biodiesel production among the four processes examined was based on a solid acid catalyst reaction. Our results showed that the process is economically feasible, even without government subsidy, while at the same time, the produced biodiesel met the required ASTM standard for purity.

Sign in / Sign up

Export Citation Format

Share Document