Dynamic analysis of non-linear wake-up behavior in Hf0.7Zr0.3O2 thin film

2020 ◽  
Vol 20 (6) ◽  
pp. 746-750 ◽  
Author(s):  
J.C. Choi ◽  
M.S. Song ◽  
K. Lee ◽  
K. Park ◽  
J. Park ◽  
...  
Keyword(s):  
Thin Film ◽  
Dynamic Analysis ◽  
Non Linear

Dynamic analysis of bifurcating, non-linear thin film micro-structures

2004 ◽  
Vol 26 (12) ◽  
pp. 1821-1831
Author(s):  
M.W. Carey ◽  
J.Geoffrey Chase ◽  
A.J. Carr ◽  
M.W. Kowarz
Keyword(s):  
Thin Film ◽  
Dynamic Analysis ◽  
Non Linear ◽  
Micro Structures

scholarly journals Seismic Strengthening Effects of Full-Size Reinforced Concrete Frame Retrofitted with Novel Concrete-Filled Tube Modular Frame by Pseudo-Dynamic Testing

2021 ◽  
Vol 11 (11) ◽  
pp. 4898
Author(s):  
Jin-Seon Kim ◽  
Ju-Seong Jung ◽  
Dong-Keun Jung ◽  
Eui-Yong Kim ◽  
Kang-Seok Lee
Keyword(s):  
Dynamic Analysis ◽  
Shear Failure ◽  
Dynamic Testing ◽  
Seismic Intensity ◽  
Seismic Retrofitting ◽  
Restoring Force ◽  
Rc Structures ◽  
Linear Dynamic ◽  
Non Linear ◽  
Force Characteristics

The present study proposes a new seismic retrofitting method using a concrete-filled tube modular frame (CFT-MF) system, a novel technique to overcome and improve the limitations of existing seismic strengthening methods. This CFT-MF seismic retrofitting method makes the most of the advantages of both concrete and steel pipes, thereby significantly improving constructability and increasing integration between the existing structure and the reinforcement joints. This method falls into the category of typical seismic retrofitting methods that focus on increasing strength, in which the required amount of seismic reinforcement can be easily estimated. Therefore, the method provides an easy solution to improving the strength of existing reinforced concrete (RC) structures with non-seismic details that are prone to shear failure. In the present study, a full-size two-story test frame modeled from existing domestic RC structures with non-seismic details was subjected to pseudo-dynamic testing. As a result, the effect of the CFT-MF system, when applied to existing RC structures, was examined and verified, especially as to its seismic retrofitting performance, i.e., restoring force characteristics, stiffness reinforcement, and seismic response control. In addition, based on the pseudo-dynamic testing results, a restoring force characteristics model was proposed to implement non-linear dynamic analysis of a structure retrofitted with the CFT-MF system (i.e., the test frame). Finally, based on the proposed restoring force characteristics, non-linear dynamic analysis was conducted, and the results were compared with those obtained by the pseudo-dynamic tests. The results showed that the RC frame (building) with no retrofitting measures applied underwent shear failure at a seismic intensity of 200 cm/s2, the threshold applied in seismic design in Korea. In contrast, in the frame (building) retrofitted with the CFT-MF system, only minor earthquake damage was observed, and even when the maximum seismic intensity (300 cm/s2) that may occur in Korean was applied, small-scale damage was observed. These results confirmed the validity of the seismic retrofitting method based on the CFT-MF system developed in the present study. The non-linear dynamic analysis and the pseudo-dynamic test showed similar results, with an average deviation of 10% or less in seismic response load and displacement.

scholarly journals Dynamic analysis of space-related linear and non-linear structures

1992 ◽  
Vol 44 (5) ◽  
pp. 1145-1148 ◽  
Author(s):  
P.A. Bosela ◽  
F.J. Shaker ◽  
D.G. Fertis
Keyword(s):  
Dynamic Analysis ◽  
Linear Structures ◽  
Non Linear

Non-linear dynamic analysis of time varying length flexible body

2020 ◽  
Vol 2020 (0) ◽  
pp. 513
Author(s):  
Masato TAKEUCHI ◽  
Kensuke HARA ◽  
Hiroshi YAMAURA
Keyword(s):  
Dynamic Analysis ◽  
Flexible Body ◽  
Time Varying ◽  
Linear Dynamic ◽  
Non Linear ◽  
Varying Length

Non-linear response of YBa2Cu3O7−y thin film microstrip resonator at microwave frequencies

1992 ◽  
Vol 84 (12) ◽  
pp. 1107-1110 ◽  
Author(s):  
R. Pinto ◽  
Ravi Kumar ◽  
Navdeep Goyal ◽  
P.R. Apte ◽  
S.P. Pai ◽  
...  
Keyword(s):  
Thin Film ◽  
Linear Response ◽  
Microstrip Resonator ◽  
Microwave Frequencies ◽  
Non Linear

Non-linear dynamic analysis of bearing—rotor system lubricating with couple stress fluid

2008 ◽  
Vol 222 (4) ◽  
pp. 599-616 ◽  
Author(s):  
C-W Chang-Jian ◽  
C-K Chen
Keyword(s):  
Dynamic Analysis ◽  
Chaotic Motion ◽  
Couple Stress ◽  
Couple Stress Fluid ◽  
Speed Ratio ◽  
Non Linear ◽  
System Life ◽  
The Stability ◽  
Suitable System ◽  
Bearing System

The current study performs a dynamic analysis of a rotor supported by two couple stress fluid film journal bearings with non-linear suspension. The dynamics of the rotor centre and bearing centre are studied. The analysis of the rotor—bearing system is investigated under the assumptions of a couple-stress lubricant and a short journal bearing approximation. The displacements in the horizontal and vertical directions are considered for various non-dimensional speed ratios. The analysis methods employed in this study include the dynamic trajectories of the rotor centre and the bearing centre, Poincaré maps, and bifurcation diagrams. The Lyapunov exponent analysis is also used to identify the onset of chaotic motion. Numerical results show that the stability of the system varies with the non-dimensional speed ratios. Specifically, it is found that the system is quasi-periodic at a small speed ratio ( s = 0.5). At speed ratios of s = 0.6–0.7, the system is periodic. At s = 0.8–1.9, the system is quasi-periodic, but the system is periodic at s = 2.0–2.6. However, the system exhibits chaotic motion at the speed ratios s = 2.7–2.74. At the speed ratios s = 2.75–3.16, the system becomes periodic. At s = 3.17–3.30, the system is unstable. The Poincaré map has a particular form at s = 3.17, indicative of a chaotic motion. At s = 3.31–6.0, the system finally becomes periodic. The results also confirm that the stability of the system varies with the non-dimensional speed ratios s and l∗. The results of this study allow suitable system parameters to be defined such that undesirable behaviour of the rotor centre can be avoided and the bearing system life extended as a result.

Sign in / Sign up

Export Citation Format

Share Document