Low-voltage driven carbon nanotube field emission lamp

2011 ◽  
Vol 11 (4) ◽  
pp. S86-S89 ◽  
Author(s):  
Na Young Bae ◽  
Woo Mi Bae ◽  
An Na Ha ◽  
Masayuki Nakamoto ◽  
Jin Jang ◽  
...  
Keyword(s):  
Carbon Nanotube ◽  
Field Emission ◽  
Low Voltage

Development of a conical anode Fe-gun for low voltage SEM

1988 ◽  
Vol 46 ◽  
pp. 978-979
Author(s):  
T. Miyokawa ◽  
S. Norioka ◽  
S. Goto
Keyword(s):  
High Resolution ◽  
Field Emission ◽  
Low Voltage ◽  
Irradiation Damage ◽  
Cold Cathode ◽  
Virtual Source ◽  
Source Position ◽  
Electrostatic Lens ◽  
Electrostatic Lenses ◽  
Wide Range

Field emission SEMs (FE-SEMs) are becoming popular due to their high resolution needs. In the field of semiconductor product, it is demanded to use the low accelerating voltage FE-SEM to avoid the electron irradiation damage and the electron charging up on samples. However the accelerating voltage of usual SEM with FE-gun is limited until 1 kV, which is not enough small for the present demands, because the virtual source goes far from the tip in lower accelerating voltages. This virtual source position depends on the shape of the electrostatic lens. So, we investigated several types of electrostatic lenses to be applicable to the lower accelerating voltage. In the result, it is found a field emission gun with a conical anode is effectively applied for a wide range of low accelerating voltages.A field emission gun usually consists of a field emission tip (cold cathode) and the Butler type electrostatic lens.

Comparison of freeze-fractured yeast replicas using conventional TEM and low-voltage field-emission SEM

1989 ◽  
Vol 47 ◽  
pp. 74-75
Author(s):  
William P. Wergin ◽  
Eric F. Erbe ◽  
Terrence W. Reilly
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Field Emission ◽  
Low Voltage ◽  
Objective Lens ◽  
Specimen Preparation ◽  
Lens System ◽  
Air Drying ◽  
Preparation Techniques ◽  
Scanning Electron

Although the first commercial scanning electron microscope (SEM) was introduced in 1965, the limited resolution and the lack of preparation techniques initially confined biological observations to relatively low magnification images showing anatomical surface features of samples that withstood the artifacts associated with air drying. As the design of instrumentation improved and the techniques for specimen preparation developed, the SEM allowed biologists to gain additional insights not only on the external features of samples but on the internal structure of tissues as well. By 1985, the resolution of the conventional SEM had reached 3 - 5 nm; however most biological samples still required a conductive coating of 20 - 30 nm that prevented investigators from approaching the level of information that was available with various TEM techniques. Recently, a new SEM design combined a condenser-objective lens system with a field emission electron source.

Enhanced Field Emission Properties of Carbon Nanotube Based Field Emitters by Dynamic Oxidation

2013 ◽  
Vol 9 (5) ◽  
pp. 619-623 ◽  
Author(s):  
Shama Parveen ◽  
Samina Husain ◽  
Avshish Kumar ◽  
Javid Ali ◽  
Mubashshir Husain ◽  
...  
Keyword(s):  
Carbon Nanotube ◽  
Field Emission ◽  
Emission Properties ◽  
Field Emission Properties ◽  
Field Emitters ◽  
Dynamic Oxidation

The fabrication and operation of fully printed Carbon nanotube field emission displays

2006 ◽  
Vol 37 (6) ◽  
pp. 495-499 ◽  
Author(s):  
Fan-Guang Zeng ◽  
Chang-Chun Zhu ◽  
Weihua Liu ◽  
Xinghui Liu
Keyword(s):  
Carbon Nanotube ◽  
Field Emission ◽  
Field Emission Displays

scholarly journals Optically Induced Field-Emission Source Based on Aligned Vertical Carbon Nanotube Arrays

Nanomaterials ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1810
Author(s):  
Mengjie Li ◽  
Qilong Wang ◽  
Ji Xu ◽  
Jian Zhang ◽  
Zhiyang Qi ◽  
...  
Keyword(s):  
Carbon Nanotube ◽  
Electric Field ◽  
Field Emission ◽  
Field Enhancement ◽  
Absorption Efficiency ◽  
Photon Absorption ◽  
Nanotube Arrays ◽  
Carbon Nanotube Arrays ◽  
Induced Field ◽  
Optically Induced

Due to the high field enhancement factor and photon-absorption efficiency, carbon nanotubes (CNTs) have been widely used in optically induced field-emission as a cathode. Here, we report vertical carbon nanotube arrays (VCNTAs) that performed as high-density electron sources. A combination of high applied electric field and laser illumination made it possible to modulate the emission with laser pulses. When the bias electric field and laser power density increased, the emission process is sensitive to a power law of the laser intensity, which supports the emission mechanism of optically induced field emission followed by over-the-barrier emission. Furthermore, we determine a polarization dependence that exhibits a cosine behavior, which verifies the high possibility of optically induced field emission.

Highly resilient field emission from aligned single-walled carbon nanotube arrays chemically attached to n-type silicon

2008 ◽  
Vol 18 (47) ◽  
pp. 5753 ◽  
Author(s):  
Cameron James Shearer ◽  
Jingxian Yu ◽  
Kane Michael O'Donnell ◽  
Lars Thomsen ◽  
Paul Christopher Dastoor ◽  
...  
Keyword(s):  
Carbon Nanotube ◽  
Field Emission ◽  
Nanotube Arrays ◽  
Single Walled Carbon Nanotube ◽  
Single Walled Carbon ◽  
Type Silicon ◽  
Carbon Nanotube Arrays
Sign in / Sign up

Export Citation Format

Share Document