Simplified white phosphorescent organic light-emitting diodes without any charge transport layer

2011 ◽  
Vol 11 (3) ◽  
pp. 865-868 ◽  
Author(s):  
Sang Eok Jang ◽  
Kyoung Soo Yook ◽  
Jun Yeob Lee
Keyword(s):  
Charge Transport ◽  
Light Emitting Diodes ◽  
Organic Light Emitting Diodes ◽  
Transport Layer ◽  
Light Emitting ◽  
Organic Light ◽  
Charge Transport Layer

Numerical Simulation on the Electronic Properties in Multilayer Organic Light Emitting Diodes

2012 ◽  
Vol 629 ◽  
pp. 224-228 ◽  
Author(s):  
Kwang Sik Kim ◽  
Young Wook Hwang ◽  
Tae Young Won
Keyword(s):  
Numerical Simulation ◽  
Charge Transport ◽  
Electronic Properties ◽  
Light Emitting Diodes ◽  
Hole Transport ◽  
Organic Light Emitting Diodes ◽  
Transport Layer ◽  
Electron Transport Layer ◽  
Light Emitting ◽  
Organic Light

We report our finite element method (FEM) simulation study on the characteristic of the charge transport layer of the multi-layer structure for organic light emitting diodes (OLEDs). The physical model cover all the key physical processes in OLEDs, namely charge injection, transport and recombination, exciton diffusion, transfer and decay for electronic properties. We performed a numerical simulation on a multilayer structure comprising a hole transport layer (HTL), an emission layer (EML), and an electron transport layer (ETL) between both electrodes; anode and cathode. The materials of the HTL is TPD (N, N'-Bis (3- methylphenyl) - N, N'- bis (phenyl) benzidine), and the ETL includes Alq3 (Tris (8- hyroxyquinolinato) aluminium). Here, we investigated the parameters such as recombination rates which influence the efficiency of the charge transport between layers in bilayer OLEDs. We also analyzed a transient response during the turn on period and the carrier transport in accordance with the variation of the injection barrier and applied voltage. In addition, this paper revealed that the effect of the insertion of the EML in bilayer structure.

scholarly journals Study of Nanostructured Polymeric Composites Used for Organic Light Emitting Diodes and Organic Solar Cells

2012 ◽  
Vol 2012 ◽  
pp. 1-6 ◽  
Author(s):  
Nguyen Nang Dinh ◽  
Do Ngoc Chung ◽  
Tran Thi Thao ◽  
David Hui
Keyword(s):  
Solar Cells ◽  
Organic Solar Cells ◽  
Light Emitting Diodes ◽  
Hole Transport ◽  
Organic Light Emitting Diodes ◽  
Transport Layer ◽  
Nanocomposite Films ◽  
Hole Transport Layer ◽  
Light Emitting ◽  
Organic Light

Polymeric nanocomposite films from PEDOT and MEH-PPV embedded with surface modified TiO2nanoparticles for the hole transport layer and emission layer were prepared, respectively, for organic emitting diodes (OLEDs). The composite of MEH-PPV+nc-TiO2was used for organic solar cells (OSCs). The characterization of these nanocomposites and devices showed that electrical (I-Vcharacteristics) and spectroscopic (photoluminescent) properties of conjugate polymers were enhanced by the incorporation of nc-TiO2in the polymers. The organic light emitting diodes made from the nanocomposite films would exhibit a larger photonic efficiency and a longer lasting life. For the organic solar cells made from MEH-PPV+nc-TiO2composite, a fill factor reached a value of about 0.34. Under illumination by light with a power density of 50 mW/cm2, the photoelectrical conversion efficiency was about 0.15% corresponding to an open circuit voltageVoc= 0.126 V and a shortcut circuit current densityJsc= 1.18 mA/cm2.

Study of nanostructured polymeric composites used for organic light emitting diodes and organic solar cells

2012 ◽  
Vol 9 (5) ◽  
pp. 399-406
Author(s):  
Do Chung ◽  
Nguyen Dinh ◽  
Tran Thao ◽  
Nguyen Nam ◽  
Tran Trung ◽  
...  
Keyword(s):  
Solar Cells ◽  
Organic Solar Cells ◽  
Light Emitting Diodes ◽  
Hole Transport ◽  
Organic Light Emitting Diodes ◽  
Transport Layer ◽  
Nanocomposite Films ◽  
Hole Transport Layer ◽  
Light Emitting ◽  
Organic Light

Polymeric nanocomposite films from PEDOT and MEH-PPV embedded with surface modified TiO2 nanoparticles were prepared, respectively for the hole transport layer (HTL) and emission layer (EL) in Organic Light Emitting Diodes (OLED). The composite of MEH-PPV + nc-TiO2 was used for Organic Solar Cells (OCS). The results from the characterization of the properties of the nanocomposites and devices showed that electrical (I-V characteristics) and spectroscopic (photoluminescent) properties of the conjugate polymers were enhanced due to the incorporation of nc-TiO2 in the polymers. The OLEDs made from the nanocomposite films would exhibit a larger photonic efficiency and a longer lasting life. For the OSC made from MEH-PPV + nc-TiO2 composite, the fill factor (FF) reached a value as high as 0.34. Under illumination of light with a power density of 50 mW/cm2, the photoelectrical conversion efficiency (PEC) was found to be of 0.15% corresponding to an open circuit voltage VOC = 1.15 V and a short-cut circuit current density JSC = 0.125 mA/cm2.

Simulation and Optimization of C60-Based Organic Light-Emitting Diodes

2021 ◽  
Vol 1026 ◽  
pp. 142-146
Author(s):  
Shuo Wang
Keyword(s):  
Indium Tin Oxide ◽  
Light Emitting Diodes ◽  
Hole Transport ◽  
Organic Light Emitting Diodes ◽  
Transport Layer ◽  
Hole Transport Layer ◽  
Optical Parameters ◽  
Light Emitting ◽  
Simulation And Optimization ◽  
Organic Light

In this work we present a detailed analysis of the current-voltage variance from tris(8-hydroxyquinoline)aluminum (Alq3) based organic light emitting diodes using general-purpose photovoltaic device model (GPVDM) software as a function of: the choice of C60, the thickness of emission layer and hole-transport layer. The electrical and optical parameters of all layers were extracted from the material directory available in GPVDM. The calculations fully consider dispersion in glass substrate, indium tin oxide anode, the organic layers as well as the dispersion in the metal cathode. As expected, applied voltage was strongly dependent on the thickness of the function layer inside the devices. Finally, guidelines for designing devices with optimum turn-on voltage and thickness are presented.

Sign in / Sign up

Export Citation Format

Share Document