The effect of curing conditions on compressive strength of ultra high strength concrete with high volume mineral admixtures

2007 ◽  
Vol 42 (5) ◽  
pp. 2083-2089 ◽  
Author(s):  
Halit Yazıcı
Keyword(s):  
Compressive Strength ◽  
High Strength Concrete ◽  
High Strength ◽  
High Volume ◽  
Mineral Admixtures ◽  
Curing Conditions ◽  
Strength Concrete

scholarly journals Effect of Curing Temperature Histories on the Compressive Strength Development of High-Strength Concrete

2015 ◽  
Vol 2015 ◽  
pp. 1-12 ◽  
Author(s):  
Keun-Hyeok Yang ◽  
Jae-Sung Mun ◽  
Myung-Sug Cho
Keyword(s):  
Compressive Strength ◽  
High Strength Concrete ◽  
High Strength ◽  
Relative Strength ◽  
Curing Temperature ◽  
Strength Development ◽  
Curing Conditions ◽  
Strength Concrete ◽  
Equivalent Age ◽  
Compressive Strength Development

This study examined the relative strength-maturity relationship of high-strength concrete (HSC) specifically developed for nuclear facility structures while considering the economic efficiency and durability of the concrete. Two types of mixture proportions with water-to-binder ratios of 0.4 and 0.28 were tested under different temperature histories including (1) isothermal curing conditions of 5°C, 20°C, and 40°C and (2) terraced temperature histories of 20°C for an initial age of individual 1, 3, or 7 days and a constant temperature of 5°C for the subsequent ages. On the basis of the test results, the traditional maturity function of an equivalent age was modified to consider the offset maturity and the insignificance of subsequent curing temperature after an age of 3 days on later strength of concrete. To determine the key parameters in the maturity function, the setting behavior, apparent activation energy, and rate constant of the prepared mixtures were also measured. This study reveals that the compressive strength development of HSC cured at the reference temperature for an early age of 3 days is insignificantly affected by the subsequent curing temperature histories. The proposed maturity approach with the modified equivalent age accurately predicts the strength development of HSC.

Superplasticizer for High Strength Concrete

2015 ◽  
Vol 1768 ◽  
Author(s):  
Luis E. Rendon Diaz Miron ◽  
Maria E. Lara Magaña
Keyword(s):  
Compressive Strength ◽  
Portland Cement ◽  
High Strength Concrete ◽  
High Strength ◽  
Mineral Admixtures ◽  
Normal Strength Concrete ◽  
Strength Concrete ◽  
Normal Strength ◽  
Ready Mixed Concrete ◽  
Mixed Concrete

ABSTRACTIn the early 1970s, experts predicted that the practical limit of ready-mixed concrete would be unlikely to exceed a compressive strength greater than 90 MPa [1]. Over the past two decades, the development of high-strength concrete has enabled builders to easily meet and surpass this estimate. The primary difference between high-strength concrete and normal-strength concrete relates to the compressive strength that refers to the maximum resistance of a concrete sample to applied pressure. Although there is no precise point of separation between high-strength concrete and normal-strength concrete, the American Concrete Institute defines high-strength concrete as concrete with a compressive strength greater than 45 MPa. Manufacture of high-strength concrete involves making optimal use of the basic ingredients that constitute normal-strength concrete. When selecting aggregates to obtain high-strength concrete, we consider strength, optimum size distribution, surface characteristics and a good bonding with the cement paste that affect compressive strength. Selecting a high-quality Portland cement and optimizing the combination of materials by varying the proportions of cement, water, aggregates, and admixtures is also necessary. Any of these properties could limit the ultimate strength of high-strength concrete. Pozzolans, such as fly ash and silica fume along with silicic acid, are the most commonly used mineral admixtures in high-strength concrete. These materials impart additional strength to the concrete by reacting with Portland cement hydration products to create additional Calcium Silicate Hydrate (CSH) gel, the part of the paste responsible for concrete strength; finally the most important admixture is polycarboxylate ether as super plasticizer. It would be difficult to produce high-strength ready-mixed concrete without using chemical admixtures. In this paper we study the use of high performance concrete (HPC) to obtain very narrow strong pre-fabricated elements for water conducting channels.

scholarly journals Curing Effects on High-Strength Concrete Properties

2019 ◽  
Vol 2019 ◽  
pp. 1-14 ◽  
Author(s):  
Afaf M. O. Wedatalla ◽  
Yanmin Jia ◽  
Abubaker A. M. Ahmed
Keyword(s):  
Compressive Strength ◽  
High Strength Concrete ◽  
High Strength ◽  
Chloride Diffusion ◽  
Steam Curing ◽  
Curing Conditions ◽  
Strength Concrete ◽  
Concrete Properties ◽  
Curing Methods ◽  
The Impact

This study was conducted to investigate the impact of hot and dry environments under different curing conditions on the properties of high-strength concrete. The concrete samples were prepared at a room temperature of 20°C and cured under different curing conditions. Some specimens underwent standard curing from 24 h after casting until the day of testing. Some specimens underwent steam curing in a dry oven at 30°C and 50°C after casting until the day of testing. Other specimens were cured for 3, 7, 21, and 28 days in water and then placed in a dry oven at 30°C and 50°C and tested at the age of 28 days, except for the specimens that were cured for 28 days, which were tested at the age of 31 days, to study the effect of curing period on the strength of concrete exposed to dry and hot environments after moist curing. The effects of hot and dry environments on high-strength concrete with different water/binder ratios (0.30, 0.35, and 0.40), using (30%) fly ash for all mixes, and (0%, 5%, and 10%) silica fume with the binder (450, 480, and 520 kg), respectively, were separately investigated, and the effects of curing under different conditions were evaluated by measuring the compressive strength, flexural strength, microhardness, and chloride diffusion and by assessing the concretes’ microstructure. The relationships between these properties were presented. A good agreement was noted between the concrete compressive strength and concrete properties at different temperatures, curing periods, and curing methods.

scholarly journals Effects of High-Volume Ground Slag Powder on the Properties of High-Strength Concrete under Different Curing Conditions

Crystals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 348
Author(s):  
Yuqi Zhou ◽  
Jianwei Sun ◽  
Zengqi Zhang
Keyword(s):  
Compressive Strength ◽  
Pore Structure ◽  
Temperature Rise ◽  
High Strength Concrete ◽  
Chloride Ion ◽  
High Strength ◽  
Curing Temperature ◽  
Curing Conditions ◽  
Strength Concrete ◽  
Slag Powder

Massive high-strength concrete structures tend to have a high risk of cracking. Ground slag powder (GSP), a sustainable and green industrial waste, is suitable for high-strength concrete. We carried out an experimental study of the effects of GSP with a specific surface area of 659 m2/kg on the hydration, pore structure, compressive strength and chloride ion penetrability resistance of high-strength concrete. Results show that adding 25% GSP increases the adiabatic temperature rise of high-strength concrete, whereas adding 45% GSP decreases the initial temperature rise. Incorporating GSP refines the pore structure to the greatest extent and improves the compressive strength and chloride ion penetrability resistance of high-strength concrete, which is more obvious under early temperature-matching curing conditions. Increasing curing temperature has a more obvious impact on the pozzolanic reaction of GSP than cement hydration. From a comprehensive perspective, GSP has potential applications in the cleaner production of green high-strength concrete.

Effects of Nano-CaCO3 on the Compressive Strength and Microstructure of High Strength Concrete in Different Curing Temperature

2011 ◽  
Vol 121-126 ◽  
pp. 126-131 ◽  
Author(s):  
Qing Lei Xu ◽  
Tao Meng ◽  
Miao Zhou Huang
Keyword(s):  
Compressive Strength ◽  
Low Temperature ◽  
High Strength Concrete ◽  
High Strength ◽  
Curing Temperature ◽  
Test Results ◽  
Strength Concrete ◽  
Calcium Nitrite ◽  
Orientation Index ◽  
Early Strength

In this paper, effects of nano-CaCO3 on compressive strength and Microstructure of high strength concrete in standard curing temperature(21±1°C) and low curing temperature(6.5±1°C) was studied. In order to improve the early strength of the concrete in low temperature, the early strength agent calcium nitrite was added into. Test results indicated that 0.5% dosage of nano-CaCO3 could inhibit the effect of calcium nitrite as early strength agent, but 1% and 2% dosage of nano-CaCO3 could improve the strength of the concrete by 13% and 18% in standard curing temperature and by 17% and 14% in low curing temperature at the age of 3days. According to the XRD spectrum, with the dosage up to 1% to 2%, nano-CaCO3 can change the orientation index significantly, leading to the improvement of strength of concrete both in standard curing temperature and low curing temperature.

Effect of Chopped Basalt Fiber on the Fresh and Hardened Properties of Fly Ash High Strength Concrete

2014 ◽  
Vol 567 ◽  
pp. 381-386 ◽  
Author(s):  
Nasir Shafiq ◽  
Muhd Fadhil Nuruddin ◽  
Ali Elheber Ahmed Elshekh ◽  
Ahmed Fathi Mohamed Salih
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
High Strength Concrete ◽  
Basalt Fiber ◽  
High Strength ◽  
Progressive Increase ◽  
Test Results ◽  
Strength Concrete ◽  
Hardened Properties ◽  
Chopped Basalt Fiber

In order to improve the mechanical properties of high strength concrete, HSC, several studies have been conducted using fly ash, FA. Researchers have made it possible to achieve 100-150MPa high strength concrete. Despite the popularity of this FAHSC, there is a major shortcoming in that it becomes more brittle, resulting in less than 0.1% tensile strain. The main objective of this work was to evaluate the fresh and hardened properties of FAHSC utilizing chopped basalt fiber stands, CBFS, as an internal strengthening addition material. This was achieved through a series of experimental works using a 20% replacement of cement by FA together with various contents of CBFS. Test results of concrete mixes in the fresh state showed no segregation, homogeneousness during the mixing period and workability ranging from 60 to 110 mm. Early and long terms of compressive strength did not show any improvement by using CBFS; in fact, it decreased. This was partially substituted by the effect of FA. Whereas, the split and flexural strengths of FASHC were significantly improved with increasing the content of CBFS as well as the percentage of the split and flexural tensile strength to the compressive strength. Also, test results showed a progressive increase in the areas under the stress-strain curves of the FAHSC strains after the CBFS addition. Therefore, the brittleness and toughness of the FAHSC were enhanced and the pattern of failure moved from brittle failure to ductile collapse using CBFS. It can be considered that the CBFS is a suitable strengthening material to produce ductile FAHSC.

Sign in / Sign up

Export Citation Format

Share Document