Isolation, characterization and optimizations of laccase producer from soil: A comprehensive study of application of statistical approach to enhance laccase productivity in Myrothecium verrucaria NFCCI 4363

2021 ◽  
pp. 100751
Author(s):  
J.P. Jawale ◽  
V.S. Nandre ◽  
R.V. Latpate ◽  
M.V. Kulkarni ◽  
P.J. Doshi
Keyword(s):  
Statistical Approach ◽  
Myrothecium Verrucaria ◽  
Comprehensive Study

Progress In The Practical Application Of Automated Image Analysis To Tem Negatives

1977 ◽  
Vol 35 ◽  
pp. 214-217
Author(s):  
F. A. Heckman ◽  
E. Redman ◽  
J.E. Connolly
Keyword(s):  
Image Analysis ◽  
Image Quality ◽  
Exposure Time ◽  
Image Contrast ◽  
Automated Image Analysis ◽  
Practical Application ◽  
Factors Affecting ◽  
High Image Quality ◽  
Qualitative Evidence ◽  
Comprehensive Study

In our initial publication on this subject1) we reported results demonstrating that contrast is the most important factor in producing the high image quality required for reliable image analysis. We also listed the factors which enhance contrast in order of the experimentally determined magnitude of their effect. The two most powerful factors affecting image contrast attainable with sheet film are beam intensity and KV. At that time we had only qualitative evidence for the ranking of enhancing factors. Later we carried out the densitometric measurements which led to the results outlined below.Meaningful evaluations of the cause-effect relationships among the considerable number of variables in preparing EM negatives depend on doing things in a systematic way, varying only one parameter at a time. Unless otherwise noted, we adhered to the following procedure evolved during our comprehensive study:Philips EM-300; 30μ objective aperature; magnification 7000- 12000X, exposure time 1 second, anti-contamination device operating.

Hexachlorobenzene toxicity in the monkey ovary: III. Ultrastructure induced by high (10 mg/kg) dose exposure

1991 ◽  
Vol 49 ◽  
pp. 130-131
Author(s):  
A. Singh ◽  
A. Dykeman ◽  
J. Jarrelf ◽  
D. C. Villeneuve
Keyword(s):  
Present Report ◽  
Reproductive Toxicity ◽  
Control Group ◽  
Primate Model ◽  
Human Follicular Fluid ◽  
Thin Sections ◽  
Cynomolgus Monkeys ◽  
Cacodylate Buffer ◽  
Induction Cycle ◽  
Comprehensive Study

Hexachlorobenzene (HCB), a persistent and mobile organochlorine pesticide, occurs in environment. HCB has been shown to be present in human follicular fluid. An objective of the present report, which is part of a comprehensive study on reproductive toxicity of HCB, was to determine the cytologic effects of the compound on ovarian follicles in a primate model.Materials and Methods. Eight Cynomolgus monkeys were housed under controlled conditions at Animal facility of Health and Welfare, Ottawa. Animals were orally administered gelatin capsules containing HCB mixed with glucose in daily dosages of 0.0 or 10 mg/kg b.w. for 90 days; the former was the control group. On the menstrual period following completion of dosing, the monkeys underwent an induction cycle of superovulation. At necropsy, one-half of an ovary from each animal was diced into ca. 2- to 3-mm cubed specimens that were fixed by immersion in 2.5% glutaraldehyde in 0.1 M cacodylate buffer (pH 7.3). Subsequent procedures followed to obtain thin sections that were examined in a Hitachi H-7000 electron microscope have been described earlier.

Comparison of Substructures Between Uniaxial and Biaxial Deformation in 1100-0 Aluminum

1981 ◽  
Vol 39 ◽  
pp. 52-53
Author(s):  
D. L. Rohr ◽  
S. S. Hecker
Keyword(s):  
Plastic Strain ◽  
Cell Walls ◽  
Room Temperature ◽  
Mechanical Response ◽  
Biaxial Tension ◽  
Initial Deformation ◽  
Uniaxial Deformation ◽  
Biaxial Deformation ◽  
Stress States ◽  
Comprehensive Study

As part of a comprehensive study of microstructural and mechanical response of metals to uniaxial and biaxial deformations, the development of substructure in 1100 A1 has been studied over a range of plastic strain for two stress states.Specimens of 1100 aluminum annealed at 350 C were tested in uniaxial (UT) and balanced biaxial tension (BBT) at room temperature to different strain levels. The biaxial specimens were produced by the in-plane punch stretching technique. Areas of known strain levels were prepared for TEM by lapping followed by jet electropolishing. All specimens were examined in a JEOL 200B run at 150 and 200 kV within 24 to 36 hours after testing.The development of the substructure with deformation is shown in Fig. 1 for both stress states. Initial deformation produces dislocation tangles, which form cell walls by 10% uniaxial deformation, and start to recover to form subgrains by 25%. The results of several hundred measurements of cell/subgrain sizes by a linear intercept technique are presented in Table I.

Microvasculature and structure of hemal lymph nodes in the wall of the rabbit bladder: a vascular corrosion casting and EM study

1995 ◽  
Vol 53 ◽  
pp. 1074-1075
Author(s):  
F.E. Hossler ◽  
M.I. McKamey ◽  
F.C. Monson
Keyword(s):  
Lymph Nodes ◽  
Light Microscopy ◽  
Corrosion Casting ◽  
Fixed Tissue ◽  
Infusion Pressure ◽  
India Ink ◽  
Cacodylate Buffer ◽  
Rabbit Bladder ◽  
Lateral Walls ◽  
Comprehensive Study

A comprehensive study of the microvasculature of the normal rabbit bladder, revealed unusual "capillary glomeruli" along the lateral walls. Here they are characterized as hemal lymph nodes using light microscopy, SEM, TEM, ink injection, and vascular casting.Bladders were perfused via a cannula placed in the abdominal aorta with either 2% glutaraldehyde in 0.1M cacodylate buffer (pH 7.4) for fixation, 10% India ink in 0.9% saline and 0.1M phosphate (pH 7.4) for vessel tracing, or resin (Mercoximethylmethacrylate: catalyst, 4:1:0.3; Ladd Research Industries) for vascular corrosion casting. Infusion pressure was 100mm Hg. Fixed tissue was sectioned from epon-araldyte resin, and stained with toluidine blue for light microscopy, and lead and uranium for TEM. Ink injected tissue was photographed directly from saline-filled bladders illuminated from below. Resin-filled tissue was macerated in 5% KOH and distilled water. Casts were critical point dried, sputter coated with goldpalladium, and examined by routine SEM at 10 KV.

Comprehensive Study of Blockchain Technology - Architecture, Consensus and Future Trends

2020 ◽  
pp. 319-325
Author(s):  
Shreya Joshi ◽  
Ms Bhavyaa ◽  
Suhani Gupta ◽  
Lalita Luthra
Keyword(s):  
Internet Of Things ◽  
Product Management ◽  
Future Trends ◽  
Deep Dive ◽  
Record Keeping ◽  
Blockchain Technology ◽  
Healthcare Product ◽  
Core Technology ◽  
Technical Challenges ◽  
Comprehensive Study

Blockchain is considered to be a disruptive core technology. Although many researchers have realized the importance of blockchain, but the research of it is still emerging. It is the record-keeping technology behind bitcoin and is one of the hottest and fastest growing skills in the IT sector today. It serves as an immutable ledger which allows transactions to take place in a decentralized man Blockchain-based applications are rising up, covering numerous fields including finance, healthcare, product management, Internet of Things (IoT), and many more. However, there are still some challenges of blockchain technology such as scalability and security problems which need to be overcome. This paper comprises of a comprehensive study of Blockchain technology. We have included here a deep dive into how blockchains work, its architecture, consensus and various applications. Furthermore, technical challenges are briefly listed.

The Influence Of The Led Luminaires Electrical Parameters On Their Correlated Colour Temperature During Operation Mode

2020 ◽  
pp. 89-96
Author(s):  
Sergei S. Kapitonov ◽  
Alexei S. Vinokurov ◽  
Sergei V. Prytkov ◽  
Sergei Yu. Grigorovich ◽  
Anastasia V. Kapitonova ◽  
...  
Keyword(s):  
Operation Mode ◽  
Light Sources ◽  
Electrical Parameters ◽  
Colour Temperature ◽  
Radiation Spectra ◽  
Service Period ◽  
Close Proximity ◽  
Definition Of ◽  
Comprehensive Study

The article describes the results of comprehensive study aiming at increase of quality of LED luminaires and definition of the nature of changes in their correlated colour temperature (CCT) in the course of operation. Dependences of CCT of LED luminaires with remote and close location of phosphor for 10 thousand hours of operation in different electric modes were obtained; the results of comparison between the initial and final radiation spectra of the luminaires are presented; using mathematical statistics methods, variation of luminaire CCT over the service period claimed by the manufacturer is forecast; the least favourable electric operation modes with the highest CCT variation observed are defined. The obtained results have confirmed availability of the problem of variation of CCT of LED luminaires during their operation. Possible way of its resolution is application of more qualitative and therefore expensive LEDs with close proximity of phosphor or LEDs with remote phosphor. The article may be interesting both for manufacturers and consumers of LED light sources and lighting devices using them.

Delivering Sustainable Water Systems Using Kalman Filter and Statistical Approach

2017 ◽  
Vol 4 (1) ◽  
pp. 41-52
Author(s):  
Dedy Loebis
Keyword(s):  
Kalman Filtering ◽  
Statistical Approach ◽  
Water Systems ◽  
Data Sets ◽  
Pressure Data ◽  
Burst Event ◽  
Sample Data ◽  
Other Information ◽  
Supply Systems ◽  
Frequency Features

This paper presents the results of work undertaken to develop and test contrasting data analysis approaches for the detection of bursts/leaks and other anomalies within wate r supply systems at district meter area (DMA)level. This was conducted for Yorkshire Water (YW) sample data sets from the Harrogate and Dales (H&D), Yorkshire, United Kingdom water supply network as part of Project NEPTUNE EP/E003192/1 ). A data analysissystem based on Kalman filtering and statistical approach has been developed. The system has been applied to the analysis of flow and pressure data. The system was proved for one dataset case and have shown the ability to detect anomalies in flow and pres sure patterns, by correlating with other information. It will be shown that the Kalman/statistical approach is a promising approach at detecting subtle changes and higher frequency features, it has the potential to identify precursor features and smaller l eaks and hence could be useful for monitoring the development of leaks, prior to a large volume burst event.

Spaghetti Westerns at the Crossroads

2016 ◽  
Keyword(s):  
Ethnic Identities ◽  
Transnational Politics ◽  
Contextual Knowledge ◽  
Cultural Significance ◽  
Local Identities ◽  
Spaghetti Westerns ◽  
Comprehensive Study ◽  
National Local

This comprehensive study brings together leading international scholars in a variety of disciplines to both revisit the Spaghetti Western genre's cultural significance and consider its ongoing influence on international film industries. The book provides a range of innovative perspectives on this discrete and perennially popular topic. The book consists of four sections: Trans-Genre Roots; Ethnic Identities, Transnational Politics; Asian Crossovers; and Routes of Relocation, Transition, and Appropriation. Its rigorous historical, cultural, and political enquiry engages with current scholarly trends and balances specialized contextual knowledge with recognition of the instability of national/local identities. The book provides fresh interrogations of the myriad ways in which the Spaghetti Western has influenced contemporary filmmaking practice across national industries.

Sign in / Sign up

Export Citation Format

Share Document