Biomethanation in a thermophilic biotrickling filter — pH control and lessons from long-term operation

2020 ◽  
Vol 11 ◽  
pp. 100525
Author(s):  
Muhammad Tahir Ashraf ◽  
Mads Ujarak Sieborg ◽  
Lars Yde ◽  
Chaeyoung Rhee ◽  
Seung Gu Shin ◽  
...  
2012 ◽  
Vol 65 (1) ◽  
pp. 177-182 ◽  
Author(s):  
F. Sempere ◽  
V. Martínez-Soria ◽  
J. M. Penya-roja ◽  
A. Waalkens ◽  
C. Gabaldón

The study of an industrial unit of biotrickling filter for the treatment of the exhaust gases of a flexographic facility was investigated over a 2-year period with the objective to meet the volatile organic compound (VOC) regulatory emission limits. Increasing the water flow rate from 2 to 40 m3 h−1 improved the performance of the process, meeting the VOC regulation when 40 m3 h−1 were used. An empty bed residence time (EBRT) of 36 s was used when the inlet air temperature was 18.7 °C, and an EBRT as low as 26 s was set when the inlet temperature was 26.8 °C. During this long-term operation, the pressure drop over the column of the bioreactor was completely controlled avoiding clogging problems and the system could perfectly handle the non-working periods without VOC emission, demonstrating its robustness and feasibility to treat the emission of the flexographic sector.


2008 ◽  
Vol 142 (3) ◽  
pp. 248-255 ◽  
Author(s):  
Munkhtsetseg Luvsanjamba ◽  
Bram Sercu ◽  
Julie Van Peteghem ◽  
Herman Van Langenhove

2013 ◽  
Vol 57 ◽  
pp. 226-235 ◽  
Author(s):  
Zouhayr Arbib ◽  
Jesús Ruiz ◽  
Pablo Álvarez-Díaz ◽  
Carmen Garrido-Pérez ◽  
Jesus Barragan ◽  
...  

2017 ◽  
Vol 1 (21) ◽  
pp. 65-73
Author(s):  
Monika Gwoździk

The paper presents results of studies on the crystallite sizes of oxide layer formed during a long-term operation on 10CrMo9-10 steel at an elevated temperature (T = 545° C, t = 200,000 h). This value was determined by a method based on analysis of the diffraction line profile, according to a Scherrer formula. The oxide layer was studied on a surface and a cross-section at the outer and inner site on the pipe outlet, at the fire and counter-fire wall of the tube. X-ray studies were carried out on the surface of a tube, then the layer’s surface was polished and the diffraction measurements repeated to reveal differences in the originated oxides layer.


1997 ◽  
Vol 36 (10) ◽  
pp. 1-8 ◽  
Author(s):  
James D. Bryers ◽  
Robert R. Sharp

Exposure of plasmid recombinant microorganisms to an open environment, either inadvertently or intentionally, requires research into those fundamental processes that govern plasmid retention, transfer and expression. In the open environment, a majority of the microbial activity occurs associated with an interface, within thin biological layers consisting of cells and their insoluble extracellular polymer, layers known as biofilms. Current toxic wastewater or wastegas treatment reactors exploit bacterial biofilm systems for certain system operating advantages. Using recombinant bacteria within a biofilm reactor to degrade xenobiotic wastes requires finding a suitable host to harbor and express the desired plasmid phenotype. Suitable host characteristics include: the ability to produce copious amounts of biofilm, resistance to waste-related injury and toxicity, and the ability to retain and express the desired plasmid during long term operation. This paper reports on a laboratory evaluation of factors governing plasmid retention and the expression of trichloroethene (TCE) degradative capacity in both suspended and biofilm cultures.


Sign in / Sign up

Export Citation Format

Share Document