Formation mechanisms of a dust-removal air curtain in a fully-mechanized excavation face and an analysis of its dust-removal performances based on CFD and DEM

2017 ◽  
Vol 28 (11) ◽  
pp. 2830-2847 ◽  
Author(s):  
Haiming Yu ◽  
Weimin Cheng ◽  
Hao Wang ◽  
Huitian Peng ◽  
Yao Xie
Keyword(s):  
Dust Removal ◽  
Formation Mechanisms ◽  
Air Curtain

scholarly journals Air Curtain Dust Removal Device Design and Dust Prevention Strategy in Heading Face

2020 ◽  
Vol 2020 ◽  
pp. 1-8
Author(s):  
Xu Huang
Keyword(s):  
Base Plate ◽  
Dust Concentration ◽  
Prevention Strategy ◽  
Previous Model ◽  
Dust Removal ◽  
Device Design ◽  
Airflow Velocity ◽  
Air Curtain ◽  
Total Dust ◽  
Left And Right

Dust protection is a safety guarantee of heading face. The previous model of air curtain research was ideal, and the dust removal effect was rarely studied in the actual dust-producing face. This paper presents a method of air curtain dust removal (ACDR) in the actual heading face. The author designed an air curtain dust removal device (ACDRD). The law of total dust concentration, respiratory dust concentration, and respiratory dust ratio is obtained. The minimum outlet airflow velocity is analyzed using the flat-plane injection theory. The effect of the exhaust fan placement on the dust removal effectiveness is examined. Research indicates the following: The airflow speed at the upper, left, and right sides of the ∩-shaped slot is 17.39 m/s, 12.04 m/s, and 13.66 m/s, respectively. The minimum dust removal speed of the air curtain is 5.48 m/s. The total dust concentration is the highest in the spot of roadheader operator, and the concentration of respiratory dust decreases sharply within 20 m. When the indentation air duct is 2.1 m away from the base plate, the dust-proof effect is better. The results can provide theoretical bases and methods for air curtain analysis of the heading face.

CFD simulations of air curtain dust removal effect by ventilation parameters during tunneling

2020 ◽  
Vol 31 (6) ◽  
pp. 2456-2468 ◽  
Author(s):  
Shuai Yin ◽  
Wen Nie ◽  
Lidian Guo ◽  
Qiang Liu ◽  
Yun Hua ◽  
...  
Keyword(s):  
Dust Removal ◽  
Cfd Simulations ◽  
Air Curtain

The dislocation structure of a 10° [110] tilt boundary in silicon

1983 ◽  
Vol 41 ◽  
pp. 114-115
Author(s):  
B. Cunningham ◽  
D.G. Ast
Keyword(s):  
Dislocation Structure ◽  
Tilt Angle ◽  
Imaging Technique ◽  
Diamond Lattice ◽  
Tilt Boundary ◽  
Formation Mechanisms ◽  
Diffraction Contrast ◽  
Lattice Fringe ◽  
Tilt Boundaries ◽  
Chemically Vapor Deposited

There have Been a number of studies of low-angle, θ < 4°, [10] tilt boundaries in the diamond lattice. Dislocations with Burgers vectors a/2<110>, a/2<112>, a<111> and a<001> have been reported in melt-grown bicrystals of germanium, and dislocations with Burgers vectors a<001> and a/2<112> have been reported in hot-pressed bicrystals of silicon. Most of the dislocations were found to be dissociated, the dissociation widths being dependent on the tilt angle. Possible dissociation schemes and formation mechanisms for the a<001> and a<111> dislocations from the interaction of lattice dislocations have recently been given.The present study reports on the dislocation structure of a 10° [10] tilt boundary in chemically vapor deposited silicon. The dislocations in the boundary were spaced about 1-3nm apart, making them difficult to resolve by conventional diffraction contrast techniques. The dislocation structure was therefore studied by the lattice-fringe imaging technique.

Formation Mechanisms for Multiply Twinned Particles During Nucleation in the Au/MICA System

1975 ◽  
Vol 33 ◽  
pp. 84-85
Author(s):  
Eal H. Lee ◽  
Helmut Poppa
Keyword(s):  
Deposition Time ◽  
High Vacuum ◽  
Dark Field ◽  
Ultra High Vacuum ◽  
Formation Mechanisms ◽  
Heat Treated ◽  
Cluster Density ◽  
Diffraction Patterns ◽  
Crystal Particle ◽  
Multiply Twinned Particles

The formation of thin films of gold on mica has been studied in ultra-high vacuum (5xl0-10 torr) . The mica substrates were heat-treated for 24 hours at 375°C, cleaved, and annealed for 15 minutes at the deposition temperature of 300°C prior to deposition. An impingement flux of 3x1013 atoms cm-2 sec-1 was used. These conditions were found to give high number densities of multiple twin particles and are based on a systematic series of nucleation experiments described elsewhere. Individual deposits of varying deposition time were made and examined by bright and dark field TEM after "cleavage preparation" of highly transparent specimens. In the early stages of growth, the films generally consist of small particles which are either single crystals or multiply twinned; a strong preference for multiply twinned particles was found whenever the particle number densities were high. Fig. 1 shows the stable cluster density ns and the variation with deposition time of multiple twin particle and single crystal particle densities, respectively. Corresponding micrographs and diffraction patterns are shown in Fig. 2.

Clinical and molecular cytogenetic characterization of two cases of inverted duplication deletion 8p

2020 ◽  
pp. 41-42
Author(s):  
Д.А. Юрченко ◽  
М.Е. Миньженкова ◽  
Е.Л. Дадали ◽  
Н.В. Шилова
Keyword(s):  
Mental Retardation ◽  
Congenital Heart ◽  
Heart Defects ◽  
Clinical Manifestations ◽  
Formation Mechanisms ◽  
Agenesis Of Corpus Callosum ◽  
Molecular Cytogenetic ◽  
Inverted Duplication ◽  
Cytogenetic Characterization

Синдром инвертированной дупликации короткого плеча хромосомы 8 со смежной терминальной делециенй (inv dup del(8p), ORPHA 96092) - редкая хромосомная аномалия (ХА) с частотой 1/10000-1/30000 живорожденных. В статье представлены клинические и молекулярно-цитогенетические характеристики двух неродственных пациентов с синдромом inv dup del(8p) и уточнены механизмы формирования хромосомного дисбаланса. Inverted duplication deletion 8p syndrome (inv dup del(8p), ORPHA 96092) is a rare chromosomal abnormality with a frequency of 1:10,000 - 30,000 newborns. Clinical manifestations of this syndrome include mental retardation, facial anomalies, hypoplasia/agenesis of corpus callosum, scoliosis and/or kyphosis, hypotonia, congenital heart defects. The article presents the clinical and molecular cytogenetic characteristics of two patients with inv dup del (8p) syndrome and clarifies the formation mechanisms.

Substituent Effects on the Thermal Decomposition of Phosphate Esters on Ferrous Surfaces

2019 ◽  
Author(s):  
James Ewen ◽  
Carlos Ayestaran Latorre ◽  
Arash Khajeh ◽  
Joshua Moore ◽  
Joseph Remias ◽  
...  
Keyword(s):  
Thermal Decomposition ◽  
Film Formation ◽  
Substituent Effects ◽  
Vapour Phase ◽  
Industrial Applications ◽  
Phosphate Esters ◽  
Antiwear Additives ◽  
Formation Mechanisms ◽  
Phosphate Ester ◽  
Wide Range

<p>Phosphate esters have a wide range of industrial applications, for example in tribology where they are used as vapour phase lubricants and antiwear additives. To rationally design phosphate esters with improved tribological performance, an atomic-level understanding of their film formation mechanisms is required. One important aspect is the thermal decomposition of phosphate esters on steel surfaces, since this initiates film formation. In this study, ReaxFF molecular dynamics simulations are used to study the thermal decomposition of phosphate esters with different substituents on several ferrous surfaces. On Fe<sub>3</sub>O<sub>4</sub>(001) and α-Fe(110), chemisorption interactions between the phosphate esters and the surfaces occur even at room temperature, and the number of molecule-surface bonds increases as the temperature is increased from 300 to 1000 K. Conversely, on hydroxylated, amorphous Fe<sub>3</sub>O<sub>4</sub>, most of the molecules are physisorbed, even at high temperature. Thermal decomposition rates were much higher on Fe<sub>3</sub>O<sub>4</sub>(001) and particularly α-Fe(110) compared to hydroxylated, amorphous Fe<sub>3</sub>O<sub>4</sub>. This suggests that water passivates ferrous surfaces and inhibits phosphate ester chemisorption, decomposition, and ultimately film formation. On Fe<sub>3</sub>O<sub>4</sub>(001), thermal decomposition proceeds mainly through C-O cleavage (to form surface alkyl and aryl groups) and C-H cleavage (to form surface hydroxyls). The onset temperature for C-O cleavage on Fe<sub>3</sub>O<sub>4</sub>(001) increases in the order: tertiary alkyl < secondary alkyl < primary linear alkyl ≈ primary branched alkyl < aryl. This order is in agreement with experimental observations for the thermal stability of antiwear additives with similar substituents. The results highlight surface and substituent effects on the thermal decomposition of phosphate esters which should be helpful for the design of new molecules with improved performance.</p>

Sign in / Sign up

Export Citation Format

Share Document