Modeling the effects of oxidizer, complexing agent and inhibitor on material removal for copper chemical mechanical polishing

2007 ◽  
Vol 254 (5) ◽  
pp. 1517-1523 ◽  
Author(s):  
Yongguang Wang ◽  
Yongwu Zhao
Keyword(s):  
Chemical Mechanical Polishing ◽  
Material Removal ◽  
Mechanical Polishing ◽  
Complexing Agent

scholarly journals Exploring the role of −NH2 functional groups of ethylenediamine in chemical mechanical polishing of GCr15 bearing steel

Friction ◽  
2020 ◽  
Author(s):  
Hanqiang Wu ◽  
Liang Jiang ◽  
Xia Zhong ◽  
Jinwei Liu ◽  
Na Qin ◽  
...  
Keyword(s):  
Functional Groups ◽  
Chemical Mechanical Polishing ◽  
Material Removal ◽  
Bearing Steel ◽  
Mechanical Polishing ◽  
Complexing Agents ◽  
Complexing Agent ◽  
Acidic Ph ◽  
Gcr15 Steel ◽  
Gcr15 Bearing Steel

AbstractEthylenediamine with two −NH2 functional groups was used as a critical complexing agent in chemical mechanical polishing (CMP) slurries for a high carbon chromium GCr15 bearing steel (equivalent to AISI 52100). The polishing performance and corresponding mechanism of −NH2 functional groups were thoroughly investigated as a function of pH. It is revealed that, when polished with ethylenediamine and H2O2-based slurries, the material removal rate (MRR) and surface roughness Ra of GCr15 steel gradually decrease as pH increases. Compared with acidic pH of 4.0, at alkaline pH of 10.0, the surface film of GCr15 steel has much higher corrosion resistance and wear resistance, and thus the material removal caused by the pure corrosion and corrosion-enhanced wear are greatly inhibited, resulting in much lower MRR and Ra. Moreover, it is confirmed that a more protective composite film, consisting of more Fe3+ hydroxides/oxyhydroxides and complex compounds with −NH2 functional groups of ethylenediamine, can be formed at pH of 10.0. Additionally, the polishing performance of pure iron and a medium carbon 45 steel exhibits a similar trend as GCr15 steel. The findings suggest that acidic pH could be feasible for amine groups-based complexing agents to achieve efficient CMP of iron-based metals.

Modeling and Analyzing on Nonuniformity of Material Removal in Chemical Mechanical Polishing of Silicon Wafer

2004 ◽  
Vol 471-472 ◽  
pp. 26-31 ◽  
Author(s):  
Jian Xiu Su ◽  
Dong Ming Guo ◽  
Ren Ke Kang ◽  
Zhu Ji Jin ◽  
X.J. Li ◽  
...  
Keyword(s):  
Silicon Wafer ◽  
Chemical Mechanical Polishing ◽  
Material Removal ◽  
Mechanical Polishing ◽  
Wafer Surface ◽  
Removal Mechanism ◽  
Particle Movement ◽  
Material Removal Mechanism ◽  
The Relationship ◽  
Nonuniform Material

Chemical mechanical polishing (CMP) has already become a mainstream technology in global planarization of wafer, but the mechanism of nonuniform material removal has not been revealed. In this paper, the calculation of particle movement tracks on wafer surface was conducted by the motion relationship between the wafer and the polishing pad on a large-sized single head CMP machine. Based on the distribution of particle tracks on wafer surface, the model for the within-wafer-nonuniformity (WIWNU) of material removal was put forward. By the calculation and analysis, the relationship between the motion variables of the CMP machine and the WIWNU of material removal on wafer surface had been derived. This model can be used not only for predicting the WIWNU, but also for providing theoretical guide to the design of CMP equipment, selecting the motion variables of CMP and further understanding the material removal mechanism in wafer CMP.

Effect of Process Parameters on Material Removal Rate in Chemical Mechanical Polishing of 6H-SiC(0001)

2008 ◽  
Vol 600-603 ◽  
pp. 831-834 ◽  
Author(s):  
Joon Ho An ◽  
Gi Sub Lee ◽  
Won Jae Lee ◽  
Byoung Chul Shin ◽  
Jung Doo Seo ◽  
...  
Keyword(s):  
Material Removal Rate ◽  
Chemical Mechanical Polishing ◽  
Material Removal ◽  
Colloidal Silica ◽  
Removal Rate ◽  
Mechanical Polishing ◽  
Diamond Particles ◽  
Average Grain Size ◽  
Silica Slurry ◽  
Sic Wafer

2inch 6H-SiC (0001) wafers were sliced from the ingot grown by a conventional physical vapor transport (PVT) method using an abrasive multi-wire saw. While sliced SiC wafers lapped by a slurry with 1~9㎛ diamond particles had a mean height (Ra) value of 40nm, wafers after the final mechanical polishing using the slurry of 0.1㎛ diamond particles exhibited Ra of 4Å. In this study, we focused on investigation into the effect of the slurry type of chemical mechanical polishing (CMP) on the material removal rate of SiC materials and the change in surface roughness by adding abrasives and oxidizer to conventional KOH-based colloidal silica slurry. The nano-sized diamond slurry (average grain size of 25nm) added in KOH-based colloidal silica slurry resulted in a material removal rate (MRR) of 0.07mg/hr and the Ra of 1.811Å. The addition of oxidizer (NaOCl) in the nano-size diamond and KOH based colloidal silica slurry was proven to improve the CMP characteristics for SiC wafer, having a MRR of 0.3mg/hr and Ra of 1.087Å.

Abrasive Effects in Oxide Chemical Mechanical Polishing

1999 ◽  
Vol 566 ◽  
Author(s):  
Uday Mahajan ◽  
Marc Bielmann ◽  
Rajiv K. Singh
Keyword(s):  
Particle Size ◽  
Surface Morphology ◽  
Surface Area ◽  
Chemical Mechanical Polishing ◽  
Material Removal ◽  
Sol Gel ◽  
Mechanical Polishing ◽  
Size Distributions ◽  
Abrasive Properties

In this study, we have characterized the effects of abrasive properties, primarily particle size, on the Chemical Mechanical Polishing (CMP) of oxide films. Sol-gel silica particles with very narrow size distributions were used for preparing the polishing slurries. The results indicate that as particle size increases, there is a transition in the mechanism of material removal from a surface area based mechanism to an indentation-based mechanism. In addition, the surface morphology of the polished samples was characterized, with the results showing that particles larger than 0.5 μm are detrimental to the quality of the SiO2 surface.

Chemical Mechanical Polishing of Cu Pattern Wafer Based Alkaline Slurry in GLSI with R(NH2)n as Complexing Agent

2011 ◽  
Vol 236-238 ◽  
pp. 3020-3023 ◽  
Author(s):  
Yan Gang He ◽  
Xiao Wei Gan ◽  
Wei Hong ◽  
Yi Hu ◽  
Yu Ling Liu
Keyword(s):  
Reaction Mechanism ◽  
Chemical Mechanical Polishing ◽  
Mechanical Polishing ◽  
Complexing Agents ◽  
Complexing Agent ◽  
Mechanism Analysis ◽  
Slurry Stability ◽  
Cu Cmp ◽  
Better Than

Chemical mechanical polishing (CMP) of Cu pattern wafer based alkaline slurry in GLSI with R(NH2)n as complexing agent was investigated. In Cu CMP procedure, it is necessary to minimize the surface dishing and erosion while maintaining good planarity. This requirements are met through the complexing agents. Based on the reaction mechanism analysis of Cu in alkaline slurry with R(NH2)n as complexing agent in CMP, the performance of Cu dishing and erosion were discussed. The results showed that the slurry stability can be improved obviously by the addition of R(NH2)n as complexing agent, both Cu1 and Cu2 have good dishing and erosion performance. Furthermore, the dishing condition of Cu2 (180-230nm) is better than that of Cu1 (280-370nm), and the erosion condition of Cu2 (230-260nm) is also better than that of Cu1 (450-500nm).

Modeling of Polishing Regimes in Chemical Mechanical Polishing

2005 ◽  
Vol 867 ◽  
Author(s):  
Suresh B. Yeruva ◽  
Chang-Won Park ◽  
Brij M. Moudgil
Keyword(s):  
Chemical Mechanical Polishing ◽  
Material Removal ◽  
Removal Rate ◽  
Mechanical Polishing ◽  
Operating Conditions ◽  
Comprehensive Model ◽  
Mechanical Effects ◽  
Microelectronic Devices ◽  
Asperity Distribution ◽  
Modification Of The Surface

AbstractChemical mechanical polishing (CMP) is widely used for local and global planarization of microelectronic devices. It has been demonstrated experimentally in the literature that the polishing performance is a result of the synergistic effect of both the chemicals and the particles involved in CMP. However, the fundamental mechanisms of material removal and the interactions of the chemical and mechanical effects are not well understood. A comprehensive model for CMP was developed taking into account both the chemical and mechanical effects for monodisperse slurries. The chemical aspect is attributed to the chemical modification of the surface layer due to slurry chemistry, whereas the mechanical aspect is introduced by indentation of particles into the modified layer and the substrate depending on the operating conditions. In this study, the model is extended to include the particle size and pad asperity distribution effects. The refined model not only predicts the overall removal rate but also the surface roughness of the polished wafer, which is an important factor in CMP. The predictions of the model show reasonable agreement with the experimental observations.

Sign in / Sign up

Export Citation Format

Share Document