Mechanical properties and wear and corrosion resistance of electrodeposited Ni–Co/SiC nanocomposite coating

2006 ◽  
Vol 252 (10) ◽  
pp. 3591-3599 ◽  
Author(s):  
Lei Shi ◽  
Chufeng Sun ◽  
Ping Gao ◽  
Feng Zhou ◽  
Weimin Liu
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Nanocomposite Coating ◽  
Wear And Corrosion ◽  
Wear And Corrosion Resistance

scholarly journals CrMnFeCoNi high entropy alloys with carbon and nitrogen: mechanical properties, wear and corrosion resistance

2021 ◽  
Vol 3 (11) ◽  
Author(s):  
L. Chmielak ◽  
L. Mujica Roncery ◽  
P. Niederhofer ◽  
S. Weber ◽  
W. Theisen
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Austenitic Steels ◽  
High Entropy Alloys ◽  
Interstitial Free ◽  
High Entropy ◽  
Carbon And Nitrogen ◽  
Wear And Corrosion ◽  
Wear And Corrosion Resistance ◽  
The Impact

AbstractThe use of interstitial elements has been a key factor for the development of different kinds of steels. However, this aspect has been little explored in the field of high entropy alloys (HEAs). In this investigation, the effect of carbon and nitrogen in a near-equiatomic CrMnFeCoNi HEA is studied, analyzing their impact on the microstructure, and mechanical properties from 77K to 673K, as well as wear, and corrosion resistance. Carbon and nitrogen are part of the FCC solid solution and contribute to the formation of precipitates. An increase in the yield and ultimate tensile strength accompanied with a decrease in the ductility are the main effects of C and N. The impact toughness of the interstitial-free material is higher than that of C and C+N alloyed systems. Compared to CrNi and CrMn austenitic steels, the wear resistance of the alloys at room temperature is rather low. The surface corrosion resistance of HEAs is comparable to austenitic steels; nevertheless HEAs are more susceptible to pitting in chloride containing solutions.

WIELAND-B06

Alloy Digest ◽  
2002 ◽  
Vol 51 (5) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Wear And Corrosion ◽  
Wear And Corrosion Resistance

Abstract Wieland-B06 is a phosphor bronze with 6% Sn for better mechanical properties and wear and corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: CU-681. Producer or source: Wieland Metals Inc., Wieland-Werke AG.

Improving the wear and corrosion resistance of Ti–6Al–4V alloy by deposition of TiSiN nanocomposite coating with pulsed-DC PACVD

Wear ◽  
2017 ◽  
Vol 390-391 ◽  
pp. 93-103 ◽  
Author(s):  
Farid Movassagh-Alanagh ◽  
Amir Abdollah-zadeh ◽  
Mahmood Aliofkhazraei ◽  
Mohammad Abedi
Keyword(s):  
Corrosion Resistance ◽  
Nanocomposite Coating ◽  
Pulsed Dc ◽  
Wear And Corrosion ◽  
Wear And Corrosion Resistance

scholarly journals Carbonization Temperature and Its Effect on the Mechanical Properties, Wear and Corrosion Resistance of Aluminum Reinforced with Eggshell

2021 ◽  
Vol 5 (10) ◽  
pp. 262
Author(s):  
Ndudim H. Ononiwu ◽  
Chigbogu G. Ozoegwu ◽  
Nkosinathi Madushele ◽  
Esther T. Akinlabi
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Base Metal ◽  
Weight Fraction ◽  
Stir Casting ◽  
Carbonization Temperature ◽  
Wear And Corrosion ◽  
Wear And Corrosion Resistance ◽  
Individual Grains

In this paper, the effect of the carbonization temperature on the mechanical properties, density, wear and corrosion resistance of AA 6063 reinforced with eggshells was investigated. The selected fabrication route for this investigation was stir casting while the weight fraction of the eggshells was kept constant at 5 wt.%. The carbonization temperature was varied at 900, 1000, 1100, and 1200 °C. The microstructure revealed that the eggshells were fairly uniformly dispersed on the individual grains and along the grain boundaries of the base metal. It was also shown that the presence of agglomeration increased with increasing carbonization temperature. The densities of the eggshell-reinforced AMCs were lower than that of the base metal. The analysis of the microhardness showed an improvement of 40.79, 22.93, 25.70, and 29.43% for the 900, 1000, 1100, and 1200 °C carbonized eggshell samples, respectively. The compressive strength studies showed that the addition of carbonized eggshells improved the compressive strength of the composites compared to the base metal. The tribology studies showed that the wear resistance improved for the 900 and 1200 °C samples, while the electrochemical studies revealed that the corrosion resistance improved for the 900 and 1000 °C samples only.

Sign in / Sign up

Export Citation Format

Share Document