scholarly journals Solid lipid nanoparticles for nose to brain delivery of haloperidol: in vitro drug release and pharmacokinetics evaluation

2014 ◽  
Vol 4 (6) ◽  
pp. 454-463 ◽  
Author(s):  
Mohd Yasir ◽  
Udai Vir Singh Sara
Keyword(s):  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Lipid Nanoparticles ◽  
Brain Delivery ◽  
In Vitro Drug Release ◽  
Solid Lipid

Solid Lipid Nanoparticles for Topical Delivery of Acitretin for the Treatment of Psoriasis by Design of Experiment

2020 ◽  
Vol 12 (2) ◽  
pp. 4474-4491
Author(s):  
Rajkumar Aland ◽  
Ganesan M ◽  
P. Rajeswara Rao ◽  
Bhikshapathi D. V. R. N.
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Tem Analysis ◽  
In Vitro Drug Release ◽  
Solid Lipid

The main objective for this investigation is to develop and optimize the solid lipid nanoparticles formulation of acitretin for the effective drug delivery. Acitretin loaded SLNs were prepared by hot homogenization followed by the ultrasonication using Taguchi’s orthogonal array with eight parameters that could affect the particle size and entrapment efficiency. Based on the results from the analyses of the responses obtained from Taguchi design, three different independent variables including surfactant concentration (%), lipid to drug ratio (w/w) and sonication time (s) were selected for further investigation using central composite design. The  lipid Dynasan-116, surfactant poloxomer-188 and co surfactant egg lecithin resulted in better percent drug loading and evaluated for particle size, zeta potential, drug entrapment efficiency, in vitro drug release and stability. All parameters were found to be in an acceptable range. TEM analysis has demonstrated the presence of individual nanoparticles in spherical shape and the results were compatible with particle size measurements.  In vitro drug release of optimized SLN formulation (F2) was found to be 95.63 ± 1.52%, whereas pure drug release was 30.12 after 60 min and the major mechanism of drug release follows first order kinetics release data for optimized formulation (F2) with non-Fickian (anomalous) with a strong correlation coefficient (R2 = 0.94572) of Korsemeyer-Peppas model. The total drug content of acitretin gel formulation was found to 99.86 ± 0.012% and the diameter of gel formulation was 6.9 ± 0.021 cm and that of marketed gel was found to be 5.7 ± 0.06 cm, indicating better spreadability of SLN based gel formulation. The viscosity of gel formulation at 5 rpm was found to be 6.1 x 103 ± 0.4 x 103 cp. The release rate (flux) of acitretin across the membrane and excised skin differs significantly, which indicates about the barrier properties of skin. The flux value for SLN based gel formulation (182.754 ± 3.126 μg cm−2 h−1) was found to be higher than that for marketed gel (122.345 ± 4.786 μg cm−2 h−1). The higher flux and Kp values of SLN based gel suggest that it might be able to enter the skin easily as compared with marketed gel with an advantage of low interfacial tension of the emulsifier film that ensures an excellent contact to the skin. This topically oriented SLN based gel formulation could be useful in providing site-specific dermal treatment of psoriasis

Effect of Acyclovir Solid Lipid Nanoparticles for the Treatment of Herpes Simplex Virus (HSV) Infection in an Animal Model of HSV-1 Infection

2019 ◽  
Vol 7 (5) ◽  
pp. 389-403 ◽  
Author(s):  
Ritika Kondel ◽  
Nusrat Shafiq ◽  
Indu P. Kaur ◽  
Mini P. Singh ◽  
Avaneesh K. Pandey ◽  
...  
Keyword(s):  
Particle Size ◽  
Single Dose ◽  
Drug Release ◽  
Mouse Model ◽  
Solid Lipid Nanoparticles ◽  
Lipid Nanoparticles ◽  
Proof Of Concept ◽  
In Vitro Drug Release ◽  
Solid Lipid

Background: Acyclovir use is limited by a high frequency of administration of five times a day and low bioavailability. This leads to poor patient compliance. Objectives: To overcome the problem of frequent dosing, we used nanotechnology platform to evaluate the proof of concept of substituting multiple daily doses of acyclovir with a single dose. Methods: Acyclovir was formulated as solid lipid nanoparticles (SLN). The nanoparticles were characterized for particle size, surface charge and morphology and in vitro drug release. The pharmacokinetic and pharmacodynamic of SLN acyclovir were compared with conventional acyclovir in a mouse model. Results: SLN showed drug loading of 90.22% with 67.44% encapsulation efficiency. Particle size was found to be of 131 ± 41.41 nm. In vitro drug release showed 100% release in SIF in 7 days. AUC0-∞ (119.43 ± 28.74 μg/ml h), AUMC0-∞ (14469 ± 4261.16 μg/ml h) and MRT (120.10 ± 9.21 h) were significantly higher for ACV SLN as compared to ACV AUC0-∞ (12.22 ± 2.47 μg/ml h), AUMC0-∞ (28.78 ± 30.16 μg/ml h) and MRT (2.07 ± 1.77 h), respectively (p<0.05). In mouse model, a single dose of ACV SLN was found to be equivalent to ACV administered as 400mg TID for 5 days in respect to lesion score and time of healing. Conclusion: The proof of concept of sustained-release acyclovir enabling administration as a single dose was thus demonstrated.

scholarly journals DEVELOPMENT AND OPTIMIZATION OF TAZAROTENE LOADED SOLID LIPID NANOPARTICLES FOR TOPICAL DELIVERY

2019 ◽  
pp. 63-77
Author(s):  
RAJKUMAR ALAND ◽  
GANESAN M ◽  
RAJESWARA RAO P
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Drug Loading ◽  
Lipid Nanoparticles ◽  
World Population ◽  
Transmission Electron Microscopy Analysis ◽  
In Vitro Drug Release ◽  
Solid Lipid

Objective: Psoriasis is an unswervingly recurring, inflammatory, autoimmune disorder of the skin, disturbing about 2–5% of the world population. The main objective for this investigation is to develop and optimize the solid lipid nanoparticles (SLN) formulation of tazarotene for effective drug delivery. Methods: Tazarotene SLNs were fabricated by hot homogenization followed by the ultrasonication using Taguchi’s orthogonal array with eight parameters that could affect the particle size and entrapment efficiency (EE). In view of the outcomes from the examinations of the responses acquired from Taguchi design, three diverse independent variables including sonication time (s), lipid to drug ratio (w/w), and surfactant concentration (%) were carefully chosen for further investigation utilizing central composite design. The lipid dynasan-116, surfactant poloxamer-188, and cosurfactant egg lecithin resulted in better percent drug loading and evaluated for particle size, drug EE, zeta potential, in vitro drug release, and stability. Results: The prepared nanoformulations were evaluated for different parameters and found to be in an acceptable range. In vitro drug release of optimized SLN formulation (F1) was found to be 98.12±1.52%, whereas pure drug release was 42.12 after 60 min, and the major mechanism of drug release follows zero-order kinetics release data for optimized formulation (F1) with non-Fickian (anomalous) with a strong correlation coefficient (R2=0.98598) of Korsmeyer-Peppas model. Transmission electron microscopy analysis has demonstrated the presence of individual nanoparticles in spherical shape, and the results were also compatible with particle size measurements. The drug content of tazarotene gel formulation was found to 98.96±0.021%, and the viscosity of gel formulation at 5 rpm was found to be 5.98×103±0.34×103 cp. The release rate (flux) of tazarotene across the membrane and expunged skin diverges pointedly, which specifies the barrier nature of skin. The flux value for SLN based gel formulation (193.454±4.324 μg/cm2/h) was found to be higher than that for marketed gel (116.345±2.238 μg/cm2/h). The higher flux and Kp values of SLN based gel suggest that it might be able to enter the skin easily as compared with marketed gel with an advantage of low interfacial tension of the emulsifier film that ensures an excellent contact to the skin. Conclusion: From the obtained results, the topically oriented SLN-based gel formulation of tazarotene could be useful in providing effective and site-specific psoriasis treatment.

scholarly journals Solid Lipid Nanoparticles of Guggul Lipid as Drug Carrier for Transdermal Drug Delivery

2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
Praveen Kumar Gaur ◽  
Shikha Mishra ◽  
Suresh Purohit
Keyword(s):  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Lipid Nanoparticles ◽  
Inflammatory Activity ◽  
Physical Parameters ◽  
In Vitro Drug Release ◽  
Solid Lipid ◽  
Lipid Component ◽  
Anti Inflammatory

Diclofenac sodium loaded solid lipid nanoparticles (SLNs) were formulated using guggul lipid as major lipid component and analyzed for physical parameters, permeation profile, and anti-inflammatory activity. The SLNs were prepared using melt-emulsion sonication/low temperature-solidification method and characterized for physical parameters, in vitro drug release, and accelerated stability studies, and formulated into gel. Respective gels were compared with a commercial emulgel (CEG) and plain carbopol gel containing drug (CG) for ex vivo and in vivo drug permeation and anti-inflammatory activity. The SLNs were stable with optimum physical parameters. GMS nanoparticle 1 (GMN-1) and stearic acid nanoparticle 1 (SAN-1) gave the highest in vitro drug release. Guggul lipid nanoparticle gel 3 (GLNG-3) showed 104.68 times higher drug content than CEG in receptor fluid. The enhancement ratio of GLNG-3 was 39.43 with respect to CG. GLNG-3 showed almost 8.12 times higherCmaxthan CEG at 4 hours. The AUC value of GLNG-3 was 15.28 times higher than the AUC of CEG. GLNG-3 showed edema inhibition up to 69.47% in the first hour. Physicochemical properties of major lipid component govern the properties of SLN. SLN made up of guggul lipid showed good physical properties with acceptable stability. Furthermore, it showed a controlled drug release profile along with a promising permeation profile.

Folate conjugated solid lipid nanoparticle: formulation development, optimization and characterization

2021 ◽  
Vol 11 ◽  
Author(s):  
Vaibhav Rajoriya ◽  
Varsha Kashaw ◽  
Sushil Kumar Kashaw
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
In Vitro Drug Release ◽  
Solid Lipid ◽  
Release Study

Objective: The current paper represents the development, optimization, and characterization of paclitaxel-loaded folate conjugated solid lipid nanoparticles (FA-SLNs). Methods: The ligand (FA-SLNs) conjugated and non-conjugated SLNs (PTX-SLNs) were prepared by hot homogenization method. Both of the formulations (FA-SLNs and PTX-SLNs) were optimized with various parameters i.e. drug loading, stirring time, stirring speed, particle size, and polydispersity index, and characterized. The in-vitro drug release study was performed in different pH environments by using the dialysis bag method. The surface morphology and particle size were determined through scanning electron micorscopy and Transmission Electron Microscopy respectively, The SLNs formulations were also evaluated for the stability study. Result: The particle size of PTX-SLNs and FA-SLNs was determined and found to be 190.1±1.9 and 231.3±2.3 nm respectively. The surface morphology of the SLNs indicates that the prepared formulations are round-shaped and show smooth surfaces. The TEM study indicated that particles were in the range of 100-300 nm. The entrapment efficiency and drug loading capacity of FA-SLNs were found to be 79.42±1.6% and 17.3±1.9%, respectively. In-vitro drug release study data, stated that the optimum drug release was found in an acidic environment at pH 4.0, that showed 94.21% drug release after 16 hours and it proves that optimized formulation FA-SLNs will gave the sustained and better release in tumor tissue that owing acidic environment because of the angiogenesis process. Conclusion: In this research paper, different formulation parameters, found to influence fabrication of drug into Solid lipid nanoparticles, were optimized for high entrapment efficiency and drug loading. The most important parameters were drug:lipid ratio, drug:polymer ratio and lipid: surfactant ratio. Higher in-vitro drug release was observed in pH 4 as compared to the pH 7.4. These result data concludes that FA-SLNs formulation was successfully prepared, optimized and characterized.

scholarly journals In vivo Evaluation of Tazarotene Solid Lipid Nanoparticles Gel For Topical Delivery

2019 ◽  
Vol 11 (1) ◽  
Author(s):  
Rajkumar Aland ◽  
M. Ganesan ◽  
P. Rajeswara Rao
Keyword(s):  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Skin Permeation ◽  
Skin Irritation ◽  
Research Work ◽  
Topical Delivery ◽  
Lipid Nanoparticles ◽  
In Vitro Drug Release ◽  
Solid Lipid

The purpose of this research work was to develop and optimize the Solid Lipid Nanoparticles (SLNs) of Tazarotene for the effective topical delivery in the treatment of psoriasis. Tazarotene loaded SLNs were prepared by hot homogenization followed by the ultrasonication using Taguchi’s design and based on the results further investigation was made using central composite design. The lipid Dynasan-116, surfactant poloxomer-188 and co surfactant egg lecithin resulted in better percent drug loading and evaluated for particle size, zeta potential, TEM, drug entrapment efficiency, in vitro drug release and stability. All parameters were found to be in an acceptable range. In vitro drug release of optimized SLN formulation (F1) was found to be 98.12 ± 1.52%, whereas pure drug release was 42.12 after 60 min. The optimized formulation was incorporated into the gel. The release rate (flux) of tazarotene across the membrane and excised skin differs significantly. The accumulative amount of Tazarotene in skin from SLN based gel formulation and marketed gel were 41.12 ± 0.12 mg and 30.02 ± 0.04 mg respectively. This result supported our hypothesis made in skin permeation studies on rat skin. From histopathological studies the microscopic observations indicate that the optimized SLN formulation, SLN based gel formulation and marketed gel has no significant effect on the microscopic structure of the skin. The skin-irritation studies indicated that SLN based gel containing Tazarotene did not show any sign of skin irritation as compared to moderate erythema shown by marketed gel formulation (Tazret® gel) after 72 h of application. Thus, SLN based gel formulation demonstrated advantage over marketed formulation in improving the skin tolerability of Tazarotene indicating their potential in improving patient acceptance and topical delivery of Tazarotene.

scholarly journals FORMULATION, DEVELOPMENT, AND CHARACTERISATION OF CILNIDIPINE LOADED SOLID LIPID NANOPARTICLES

2018 ◽  
Vol 11 (9) ◽  
pp. 120
Author(s):  
Remya Pn ◽  
Damodharan N
Keyword(s):  
Drug Release ◽  
Zeta Potential ◽  
Solid Lipid Nanoparticles ◽  
Tween 80 ◽  
Lipid Nanoparticles ◽  
Lipid Matrix ◽  
Formulation Development ◽  
In Vitro Drug Release ◽  
Solid Lipid

Objective: The aim of the present investigation is to develop solid lipid nanoparticles (SLNs) of cilnidipine using hot homogenization followed by ultrasonication technique and to improve the dissolution characteristics of the drug.Methods: The cilnidipine-loaded SLNs were formulated using stearic acid (SA), glyceryl monostearate (GMS), and palmitic acid (PA) as lipid matrix and tween-20, tween-80, and tween-40 as an emulsifier by hot homogenization and ultrasonication method. The physicochemical characteristics of SLN were analyzed for Fourier transform infrared studies, entrapment efficiency (EE), zeta potential, in vitro drug release, particle size analysis, scanning electron microscopy, and stability.Results: The SLNs with PA showed a sustained release of drug 82%–88%, respectively, after 10 h. The SLNs of PA using tween-80 as emulsifier resulted with high EE% than SLNs of SA and GMS. The compatibility studies are done by Fourier transformed infrared for formulations which contain PA as lipid matrix and tween-80 as an emulsifier, and it showed no drug excipient incompatibility. The formulation containing PA and tween-80 shown particles of average size 152 nm having polydispersity index of. 217 with 68.7 % EE were produced. The zeta potential of the formulation was found to be – 27 mV and the order of percentage drug release was from PA>GMS>SA, and steric stabilizers retard the drug release more than ionic stabilizers.Conclusion: SLN formulations showed the best results in EE as well as in in vitro drug release and therefore confirmed that the novel drug delivery system provides an improved strategy for the treatment of hypertension.

scholarly journals Transdermal delivery of solid lipid nanoparticles of ketoprofen for treatment of arthritis

2019 ◽  
Vol 8 (3) ◽  
pp. 627-636
Keyword(s):  
Drug Release ◽  
Transdermal Delivery ◽  
Solid Lipid Nanoparticles ◽  
Entrapment Efficiency ◽  
Controlled Drug Release ◽  
Lipid Nanoparticles ◽  
In Vitro Drug Release ◽  
Solid Lipid ◽  
Anti Inflammatory

Ketoprofen (KP) is a 2-(3-benzolphenyl) propionic acid with anti-inflammatory, analgesic and antipyretic properties. It belongs to BCS Class II drug. It also has a short half-life of 120 minutes. Drugs acidic nature causes gastric irritation which is a major limitation. The present work aims to develop and evaluate solid lipid nanoparticles (SLN) to provide transdermal drug delivery. SLN loaded gel will enhance the solubility of Ketoprofen thereby increasing bioavailability giving controlled drug release. Solid lipid nanoparticles were prepared by solvent injection followed by probe sonication method. Cetyl palmitate was used as lipid and Tween80 as a surfactant. Batches were prepared by varying the concentration of the lipid phase and the surfactant phase. The solid lipid nanoparticles were evaluated for particle size analysis, drug entrapment efficiency, zeta potential and in vitro drug release study. Differential scanning calorimetry (DSC) and Powder X-ray diffraction (PXRD) study were done to study crystallinity behavior.SLN was studied for its anti-inflammatory activity. F4 batch of SLN was incorporated into gel and evaluated for drug content, pH, viscosity, in-vitro diffusion and ex-vivo diffusion study. SLN were successfully prepared. Among the batches F1-F9, F4 batch was selected based upon the size, entrapment efficiency, stability and drug release. The resultant solid lipid nanoparticles showed entrapment efficiency of 78.24%. The solubility was improved by 50 fold. The particle size was 250 nm, PDI was 0.398 and zeta potential -21.98mV. In-vitro drug release of gel from F4 SLN batch showed controlled drug release in 8 hours. Transdermal delivery of SLN retaining its anti-inflammatory activity was successfully developed.

Sign in / Sign up

Export Citation Format

Share Document