3D-printing pen versus desktop 3D-printers: Fabrication of carbon black/polylactic acid electrodes for single-drop detection of 2,4,6-trinitrotoluene

2020 ◽  
Vol 1132 ◽  
pp. 10-19 ◽  
Author(s):  
Rafael M. Cardoso ◽  
Diego P. Rocha ◽  
Raquel G. Rocha ◽  
Jéssica S. Stefano ◽  
Rodrigo A.B. Silva ◽  
...  
Keyword(s):  
3D Printing ◽  
Carbon Black ◽  
Polylactic Acid ◽  
Single Drop ◽  
3D Printers

scholarly journals Assessing the Radiological Density and Accuracy of Mandible Polymer Anatomical Structures Manufactured Using 3D Printing Technologies

Polymers ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 2444 ◽  
Author(s):  
Paweł Turek ◽  
Grzegorz Budzik ◽  
Łukasz Przeszłowski
Keyword(s):  
Standard Deviation ◽  
3D Printing ◽  
Polylactic Acid ◽  
Manufacturing Process ◽  
Acrylic Resin ◽  
Polymer Materials ◽  
Anatomical Structures ◽  
Tomography System ◽  
Complex Models ◽  
3D Printers

Nowadays, 3D printing technologies are among the rapidly developing technologies applied to manufacture even the most geometrically complex models, however no techniques dominate in the area of craniofacial applications. This study included 12 different anatomical structures of the mandible, which were obtained during the process of reconstructing data from the Siemens Somatom Sensation Open 40 system. The manufacturing process used for the 12 structures involved the use of 8 3D printers and 12 different polymer materials. Verification of the accuracy and radiological density was performed with the CT160Xi Benchtop tomography system. The most accurate results were obtained in the case of models manufactured using the following materials: E-Model (Standard Deviation (SD) = 0.145 mm), FullCure 830 (SD = 0.188 mm), VeroClear (SD = 0.128 mm), Digital ABS-Ivory (SD = 0.117 mm), and E-Partial (SD = 0.129 mm). In the case of radiological density, ABS-M30 was similar to spongious bone, PC-10 was similar to the liver, and Polylactic acid (PLA) and Polyethylene terephthalate (PET) were similar to the spleen. Acrylic resin materials were able to imitate the pancreas, kidney, brain, and heart. The presented results constitute valuable guidelines that may improve currently used radiological phantoms and may provide support to surgeons in the process of performing more precise treatments within the mandible area.

scholarly journals 3D printed mask extenders as a supplement to isolation masks to relieve posterior auricular discomfort: an innovative 3D printing response to the COVID-19 pandemic

2020 ◽  
Author(s):  
Zachary O’Connor ◽  
Daniel Huellewig ◽  
Peeti Sithiyopasakul ◽  
Jason Morris ◽  
Connie Gan ◽  
...  
Keyword(s):  
3D Printing ◽  
Polylactic Acid ◽  
Healthcare Workers ◽  
Constant Pressure ◽  
Healthcare Providers ◽  
3D Printer ◽  
Institutional Review ◽  
3D Printers ◽  
3D Printed ◽  
Skin Pressure

Abstract Purpose: Many commonly used mask designs are secured by elastic straps looping around the posterior auricular region. This constant pressure and friction against the skin may contribute to increased wearer pain, irritation, and discomfort. The purpose of this work is to report a modified 3D printed mask extender to alleviate discomfort and increase mask wearability by relieving posterior auricular pressure from isolation masks.Methods: Our institutional review board designated this project as non-human research and exempt. As part of resourcing 3D printing laboratories along with individual 3D printers to provide resources to healthcare workers, mask extenders were printed to relieve posterior auricular pressure from individuals wearing isolation masks. The authors modifed an existing mask extender, increasing its length with accompanying peripheral rungs for isolation mask securement. 3D printing was performed with Ultimaker S5 (Ultimaker B.V.; Geldermalsen, Netherlands) and CR-10 (Creality3D; Shenzhen, China) 3D printers using polylactic acid filaments. The author’s modified extended mask extenders were printed and freely delivered to healthcare workers (physicians, nurses, technologists, and other personnel) at the authors’ institution. Results: The final mask extender design was printed with the two 3D printers with a maximum 7 straps printed simultaneously on each 3D printer. Mean print times ranges from 105 minutes for the Ultimaker S5 printer and 150 minutes for the CR-10. 475 mask extenders were delivered to healthcare workers at the authors’ institution, with the demand far exceeding the available supply. Conclusion: We offer a modification of a 3D printed mask extender design that decreases discomfort and increases the wearability of isolation mask designs with ear loops thought to relieve posterior auricular skin pressure and ability to control strap tension. The design is simple, produced with inexpensive material (polylactic acid), and have been well-received by healthcare providers at our institution

scholarly journals 3D printed mask extenders as a supplement to isolation masks to relieve posterior auricular discomfort: an innovative 3D printing response to the COVID-19 pandemic

2020 ◽  
Vol 6 (1) ◽  
Author(s):  
Zachary O’Connor ◽  
Daniel Huellewig ◽  
Peeti Sithiyopasakul ◽  
Jason A. Morris ◽  
Connie Gan ◽  
...  
Keyword(s):  
3D Printing ◽  
Polylactic Acid ◽  
Healthcare Workers ◽  
Constant Pressure ◽  
Healthcare Providers ◽  
3D Printer ◽  
Institutional Review ◽  
3D Printers ◽  
3D Printed ◽  
Skin Pressure

Abstract Purpose Many commonly used mask designs are secured by elastic straps looping around the posterior auricular region. This constant pressure and friction against the skin may contribute to increased wearer pain, irritation, and discomfort. The purpose of this work is to report a modified 3D printed mask extender to alleviate discomfort and increase mask wearability by relieving posterior auricular pressure from isolation masks. Methods Our institutional review board designated this project as non-human research and exempt. As part of resourcing 3D printing laboratories along with individual 3D printers to provide resources to healthcare workers, mask extenders were printed to relieve posterior auricular pressure from individuals wearing isolation masks. The authors modifed an existing mask extender, increasing its length with accompanying peripheral rungs for isolation mask securement. 3D printing was performed with Ultimaker S5 (Ultimaker B.V.; Geldermalsen, Netherlands) and CR-10 (Creality3D; Shenzhen, China) 3D printers using polylactic acid filaments. The author’s modified extended mask extenders were printed and freely delivered to healthcare workers (physicians, nurses, technologists, and other personnel) at the authors’ institution. Results The final mask extender design was printed with the two 3D printers with a maximum 7 straps printed simultaneously on each 3D printer. Mean print times ranges from 105 min for the Ultimaker S5 printer and 150 min for the CR-10. Four hundred seventy-five mask extenders were delivered to healthcare workers at the authors’ institution, with the demand far exceeding the available supply. Conclusion We offer a modification of a 3D printed mask extender design that decreases discomfort and increases the wearability of isolation mask designs with ear loops thought to relieve posterior auricular skin pressure and ability to control strap tension. The design is simple, produced with inexpensive material (polylactic acid), and have been well-received by healthcare providers at our institution.

scholarly journals 3D printed mask extenders: supplement to isolation masks to relieve posterior auricular discomfort

2020 ◽  
Author(s):  
Zachary O’Connor ◽  
Daniel Huellewig ◽  
Peeti Sithiyopasakul ◽  
Jason Morris ◽  
Connie Gan ◽  
...  
Keyword(s):  
3D Printing ◽  
Polylactic Acid ◽  
Healthcare Workers ◽  
Constant Pressure ◽  
Healthcare Providers ◽  
3D Printer ◽  
Institutional Review ◽  
3D Printers ◽  
3D Printed ◽  
Skin Pressure

Abstract Purpose Many commonly used mask designs are secured by elastic straps looping around the posterior auricular region. This constant pressure and friction against the skin may contribute to increased wearer pain, irritation, and discomfort. The purpose of this work is to report a modified 3D printed mask extender to alleviate discomfort and increase mask wearability by relieving posterior auricular pressure from isolation masks. Methods Our institutional review board designated this project as non-human research and exempt. As part of resourcing 3D printing laboratories along with individual 3D printers to provide resources to healthcare workers, mask extenders were printed to relieve posterior auricular pressure from individuals wearing isolation masks. The authors modifed an existing mask extender, increasing its length with accompanying peripheral rungs for isolation mask securement. 3D printing was performed with Ultimaker S5 (Ultimaker B.V.; Geldermalsen, Netherlands) and CR-10 (Creality3D; Shenzhen, China) 3D printers using polylactic acid filaments. The author’s modified extended mask extenders were printed and freely delivered to healthcare workers (physicians, nurses, technologists, and other personnel) at the authors’ institution. Results The final mask extender design was printed with the two 3D printers with a maximum 7 straps printed simultaneously on each 3D printer. Mean print times ranges from 105 minutes for the Ultimaker S5 printer and 150 minutes for the CR-10. 475 mask extenders were delivered to healthcare workers at the authors’ institution, with the demand far exceeding the available supply. Conclusion We offer a modification of a 3D printed mask extender design that decreases discomfort and increases the wearability of isolation mask designs with ear loops thought to relieve posterior auricular skin pressure and ability to control strap tension. The design is simple, produced with inexpensive material (polylactic acid), and have been well-received by healthcare providers at our institution

scholarly journals 3D printed mask extenders as a supplement to isolation masks to relieve posterior auricular discomfort: an innovative 3D printing response to the COVID-19 pandemic

2020 ◽  
Author(s):  
Zachary O’Connor ◽  
Daniel Huellewig ◽  
Peeti Sithiyopasakul ◽  
Jason Morris ◽  
Connie Gan ◽  
...  
Keyword(s):  
3D Printing ◽  
Polylactic Acid ◽  
Healthcare Workers ◽  
Constant Pressure ◽  
Healthcare Providers ◽  
3D Printer ◽  
Institutional Review ◽  
3D Printers ◽  
3D Printed ◽  
Skin Pressure

Abstract Purpose: Many commonly used mask designs are secured by elastic straps looping around the posterior auricular region. This constant pressure and friction against the skin may contribute to increased wearer pain, irritation, and discomfort. The purpose of this work is to report a modified 3D printed mask extender to alleviate discomfort and increase mask wearability by relieving posterior auricular pressure from isolation masks.Methods : Our institutional review board designated this project as non-human research and exempt. As part of resourcing 3D printing laboratories along with individual 3D printers to provide resources to healthcare workers, mask extenders were printed to relieve posterior auricular pressure from individuals wearing isolation masks. The authors modifed an existing mask extender, increasing its length with accompanying peripheral rungs for isolation mask securement. 3D printing was performed with Ultimaker S5 (Ultimaker B.V.; Geldermalsen, Netherlands) and CR-10 (Creality3D; Shenzhen, China) 3D printers using polylactic acid filaments. The author’s modified extended mask extenders were printed and freely delivered to healthcare workers (physicians, nurses, technologists, and other personnel) at the authors’ institution.Results: The final mask extender design was printed with the two 3D printers with a maximum 7 straps printed simultaneously on each 3D printer. Mean print times ranges from 105 minutes for the Ultimaker S5 printer and 150 minutes for the CR-10. 475 mask extenders were delivered to healthcare workers at the authors’ institution, with the demand far exceeding the available supply.Conclusion: We offer a modification of a 3D printed mask extender design that decreases discomfort and increases the wearability of isolation mask designs with ear loops thought to relieve posterior auricular skin pressure and ability to control strap tension. The design is simple, produced with inexpensive material (polylactic acid), and have been well-received by healthcare providers at our institution

scholarly journals Fused Filament Fabrication Three-Dimensional Printing Multi-Functional of Polylactic Acid/Carbon Black Nanocomposites

2021 ◽  
Vol 7 (3) ◽  
pp. 52
Author(s):  
Nectarios Vidakis ◽  
Markos Petousis ◽  
Emmanuel Velidakis ◽  
Nikolaos Mountakis ◽  
Peder Erik Fischer-Griffiths ◽  
...  
Keyword(s):  
3D Printing ◽  
Carbon Black ◽  
Polylactic Acid ◽  
Complex Geometry ◽  
Three Dimensional ◽  
Antibacterial Properties ◽  
Fused Filament Fabrication ◽  
Melt Mixing ◽  
Screening Process ◽  
3D Printed

Conductive Polymer Composites (CPCs) have recently gained an extensive scientific interest as feedstock materials in Fused Filament Fabrication (FFF) Three-dimensional (3D) printing. Polylactic Acid (PLA), widely used in FFF 3D printing, as well as its Carbon Black (CB) nanocomposites at different weight percentage (wt.%) filler loadings (0.5, 1.0, 2.5 and 5.0 wt.%), were prepared via a melt mixing filament extrusion process in this study and utilized to manufacture FFF 3D printed specimens. The nanocomposites were examined for their electrical conductivity. The highest loaded 3D printed CPC (5.0 wt.%) was tested as an electrothermal Joule heating device. Static tensile, flexural, Charpy’s impact and Vickers microhardness mechanical properties were investigated for the neat and PLA/CB 3D printed nanocomposites. Dynamic Mechanical Analysis (DMA) revealed a stiffening mechanism for the PLA/CB nanocomposites. Scanning Electron Microscopy (SEM) elucidated the samples’ internal and external microstructural characteristics. The PLA/CB 5.0 wt.% nanocomposite demonstrated also antibacterial properties, when examined with a screening process, against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). It can be envisaged that the 3D printed PLA/CB CPCs exhibited a multi-functional performance, and could open new avenues towards low-cost personalized biomedical objects with complex geometry, amongst others, i.e., surgery tools, splints, wearables, etc.

Application of Innovative Hydroxyapatite Materials in 3D Printing for Biocompatible Voice Implants

2018 ◽  
Vol 69 (4) ◽  
pp. 840-842
Author(s):  
Wojciech Musialik ◽  
Marcin Nabialek ◽  
Slawomir Letkiewicz ◽  
Andrei Victor Sandu ◽  
Katarzyna Bloch
Keyword(s):  
3D Printing ◽  
Surgical Procedures ◽  
Bacterial Infections ◽  
Fungal Infections ◽  
Colloidal Silver ◽  
Bone Implants ◽  
External Ring ◽  
Voice Prostheses ◽  
3D Printers ◽  
Silver Composite

The paper presents the possibility of using an innovative hydroxyapatite filament Ca10(PO4)6(OH)2 for printing in 3D printers of bone implants and the possibility of using it during implantation with voice prostheses. The introduction of an additional colloidal silver composite in voice implants will contribute to the reduction of bacterial infections, fungal infections and granulomatous hyperplasia. The creation of a stable external ring of the vocal fistula will remove complications associated with it with enlargement of the fistula and leakiness of voice implants. The ability to print with a hydroxyapatite filament will allow digital pre-surgery modeling of bone implants suited to the needs of surgical procedures.

Designing Inclusion: Using 3D Printing to Maximize Adapted Physical Education Participation

2021 ◽  
pp. 004005992110101
Author(s):  
A. Chloe Simpson ◽  
Andrea Ruth Taliaferro
Keyword(s):  
3D Printing ◽  
Student Success ◽  
Assistive Technology ◽  
Adapted Physical Education ◽  
Physical Educators ◽  
Related Service ◽  
3D Printers ◽  
3D Printed ◽  
Education Participation ◽  
Individual Design

While assistive technology is often suggested as a way to increase, maintain, or improve functional ability for individuals with disabilities within physical activity (PA) settings, cost and availability of such items are often noted as barriers. In recent years, 3D printing has become available to the general public through the adoption of 3D printers in schools, libraries, and universities. Through individual design and rapid prototyping, 3D printing can support physical educators in accommodating student need for assistive technology through a multitude of modification possibilities. This article will highlight the capacity for 3D printed assistive technology within educational settings, and will illustrate how teachers, APE specialists, and other related service personnel can utilize this technology to support student success in PE and PA settings. This article will also assist practitioners with locating, uploading, and utilizing existing collections of 3D assistive technology models from open-source websites, such as Thingiverse.

scholarly journals Evaluation of the Ability to Accurately Produce Angular Details by 3D Printing of Plastic Parts

Machines ◽  
2021 ◽  
Vol 9 (8) ◽  
pp. 150
Author(s):  
Andrei Marius Mihalache ◽  
Gheorghe Nagîț ◽  
Laurențiu Slătineanu ◽  
Adelina Hrițuc ◽  
Angelos Markopoulos ◽  
...  
Keyword(s):  
3D Printing ◽  
Point Of View ◽  
Vertex Angle ◽  
Function Type ◽  
Constant Height ◽  
3D Printers ◽  
3D Printed ◽  
Mathematical Processing ◽  
Plastic Parts

3D printing is a process that has become widely used in recent years, allowing the production of parts with relatively complicated shapes from metallic and non-metallic materials. In some cases, it is challenging to evaluate the ability of 3D printers to make fine details of parts. For such an assessment, the printing of samples showing intersections of surfaces with low angle values was considered. An experimental plan was designed and materialized to highlight the influence of different factors, such as the thickness of the deposited material layer, the printing speed, the cooling and filling conditions of the 3D-printed part, and the thickness of the sample. Samples using areas in the form of isosceles triangles with constant height or bases with the same length, respectively, were used. The mathematical processing of the experimental results allowed the determination of empirical mathematical models of the power-function type. It allowed the detection of both the direction of actions and the intensity of the influence exerted by the input factors. It is concluded that the strongest influence on the printer’s ability to produce fine detail, from the point of view addressed in the paper, is exerted by the vertex angle, whose reduction leads to a decrease in printing accuracy.

Sign in / Sign up

Export Citation Format

Share Document