Determination of Mn, Fe, and Cu in chemically-treated wood pulps by the XRF addition method

2001 ◽  
Vol 370 (8) ◽  
pp. 1105-1108 ◽  
Author(s):  
Jaakko Rämö ◽  
M. Sillanpää ◽  
Tapio Klasila ◽  
Sulo Piepponen
1968 ◽  
Vol 22 (6) ◽  
pp. 749-752 ◽  
Author(s):  
Isoo Masuda ◽  
Tamon Inouye

An improved method for the tabulation of analytical data, obtained by addition and successive dilution procedures for spectrochemical analysis, is presented. The author's previous work shows that the solution of the first approximation diverges at some dilution factor smaller than unity when the slope of the working curve of added series is greater than that of unadded series. By obtaining the distance between this position and the origin, and taking it as a correction factor for zero-order approximation, tabulation of the analytical value, in the case of β>α, is carried out. One parameter of the calculation is deleted by normalizing the spectral intensity; therefore, the tabulation can be simplified.


2016 ◽  
Vol 11 (1) ◽  
Author(s):  
Sukib Sukib ◽  
Muti'ah Muti'ah

Abstrak. Telah dilakukan penelitian tentang penyusunan metode analisis merkuri melalui pembentukan senyawa kompleks dengan 4,4'-Bis(dimethylamino)thio-benzophenone TMK. Senyawa kompleks tersebut berwarna biru kehijauan yang dapat dideteksi dengan  spektrofoto-meter pada kondisi: lmax 574 nm;  pH 3; konsentrasi TMK 0,0002 M, dan waktu tunggu selama 4–10 menit. perbandingan volume pereaksi: Hg(II), bufer pH 3, TMK 0,002 M, H2O bebas ion adalah 1:1:1:7. Dari hasil penelitian menunjukkan bahwa metode ini telah memenuhi validitas, yaitu: linieritas 0,05–2,0 mg/L, limit deteksi 0,008 mg/L, dan % recovery antara 98% – 102%. Gangguan matriks akibat adanya ion–ion Au(III), Ag(I), Pd(II), Cu(II), Co(II), dan Fe(II) dapat dieliminasi dengan metode ekstraksi pelarut dan adisi standar. Metode adisi standar terbukti mampu memberikan data hasil pengukuran yang dapat dipercaya pada a 5%, yaitu untuk sampel buatan sebesar (0,053 ± 0,001) mg/L, air sungai (0,034 ± 0,004) mg/L, dan sedimen sebesar (4,172 ± 0,050) mg/kg. Dari hasil penelitian ini dapat disimpulkan bahwa metode ekstraksi pelarut dan adisi standar mampu mengeliminasi gangguan matriks pada analisis merkuri sebagai kompleks Hg-TMK secara spektrofotometriKata kunci: Metode analisis merkuri, Thio Michler’s keton, eliminasi, gangguan matriks  Abstract. A research  of analysis method for determination of mercury through formation of complex with 4,4'-bis(dimethylamino)thiobenzophenone TMK has been conducted. The green blue complex compound can be detected with spectrophoto-meter in conditions: lmax 574 nm, buffer acetate pH 3, concentration of TMK 0,0002 M, and the absorbance of complex remains stable for 4–10 minutes. The formula of reagents volume for: Hg(II): buffer acetate pH 3: TMK 0,002 M : de-ionized water is 1:1:1:7. This method is valid, with parameters such as linearity 0.05–2.00 mg/L, limit of detection 0.008 mg/L, and recovery in the range 98%-102%. Matrix interferences that are caused by Au(III), Ag(I), Pd(II), Cu(II), Co(II), and Fe(III) ions can be eliminated with solvent extraction and standard addition methods. Standard addition method is able to give data of trusty measurement result at a 5%, that is for synthesis sample as (0.053 ±  0.001) mg/L, river water (0.034 ± 0.004) mg/L, and for sediment (4.172 ± 0.050) mg/kg. From the result of this research, it can be concluded that solvent extraction and standard addition methods are able to eliminated matrix interferences in mercury analysis as Hg-TMK complex spectrophotometrically Key waords: mercury analysis method, Thio Michler’s ketone, elimination, matrix interferences


Sign in / Sign up

Export Citation Format

Share Document