Accuracy and Precision of 62 Bone Densitometers Using a European Spine Phantom

1999 ◽  
Vol 10 (1) ◽  
pp. 14-19 ◽  
Author(s):  
S. Kolta ◽  
P. Ravaud ◽  
J. Fechtenbaum ◽  
M. Dougados ◽  
C. Roux
Keyword(s):  
European Spine Phantom ◽  
Accuracy And Precision

Study on the scanning protocols for measuring bone mineral density by gemstone CT spectral imaging based on European spine phantom

2021 ◽  
pp. 028418512110630
Author(s):  
Shihao Huang ◽  
Xuan Cui ◽  
Heli Han ◽  
Yuan Zhang ◽  
Bing Gao ◽  
...  
Keyword(s):  
Bone Mineral Density ◽  
Bone Mineral ◽  
Spectral Imaging ◽  
Mineral Density ◽  
Quantitative Ct ◽  
European Spine Phantom ◽  
Accuracy And Precision ◽  
Relative Standard ◽  
Spectral Computed Tomography ◽  
Exposure Levels

Background Gemstone spectral computed tomography (GSCT) has been used to measure bone mineral density (BMD) in human vertebrae and animal models gradually. Purpose To investigate the effect of scanning protocols for BMD measurements by GSCT using the European spine phantom (ESP) and its accuracy and precision. Material and Methods The ESP number 145 containing three hydroxyapatite (HAP) inserts with densities of 50, 100, and 200 mg/cm3 were labeled as L1, L2, and L3, respectively. Quantitative CT (QCT) protocol and 14 groups of scanning protocols configured by GSCT were used to repeatedly scan the ESP 10 times. Their measurements were compared with the true values of ESP and their relative standard deviation and relative error were calculated. Results The measured values of the three inserts at different exposure levels were statistically significant ( P < 0.05). The measured values in the 0.8 s/r 260 mA group, 0.5 s/r 630 mA group, and 0.6 s/r 640 mA group were not significantly different from the actual ESP values for L1 and L2. However, the measured values at all the parameters were significantly different from the actual values for the L3. Conclusion CT gemstone spectral imaging can accurately and quantitatively measure the HAP value of ESP, but the results of BMD will be affected by the scanning protocols. The best scanning parameter of ESP measured by GSCT was 0.8 s/r 260 mA, taking dose into consideration, and the measurement accuracy of vertebrae with low BMD was higher than that of QCT under this parameter.

A in Vivo Assay for Standardizing Heparin Preparations

1979 ◽  
Vol 41 (03) ◽  
pp. 576-582
Author(s):  
A R Pomeroy
Keyword(s):  
In Vitro Assays ◽  
British Pharmacopoeia ◽  
In Vitro Method ◽  
Standard Preparation ◽  
Reliable Estimation ◽  
Assay Procedure ◽  
Accuracy And Precision ◽  
Heparin Preparation

SummaryThe limitations of currently used in vitro assays of heparin have demonstrated the need for an in vivo method suitable for routine use.The in vivo method which is described in this paper uses, for each heparin preparation, four groups of five mice which are injected intravenously with heparin according to a “2 and 2 dose assay” procedure. The method is relatively rapid, requiring 3 to 4 hours to test five heparin preparations against a standard preparation of heparin. Levels of accuracy and precision acceptable for the requirements of the British Pharmacopoeia are obtained by combining the results of 3 to 4 assays of a heparin preparation.The similarity of results obtained the in vivo method and the in vitro method of the British Pharmacopoeia for heparin preparations of lung and mucosal origin validates this in vivo method and, conversely, demonstrates that the in vitro method of the British Pharmacopoeia gives a reliable estimation of the in vivo activity of heparin.

849-P: Accuracy and Precision of Continuous Glucose Monitoring (CGM) in Hospitalized Patients Undergoing Radiology Procedures

Diabetes ◽  
2020 ◽  
Vol 69 (Supplement 1) ◽  
pp. 849-P ◽  
Author(s):  
ALEXANDRA MIGDAL ◽  
ELIAS SPANAKIS ◽  
RODOLFO J. GALINDO ◽  
GEORGIA DAVIS ◽  
LAKSHMI G. SINGH ◽  
...  
Keyword(s):  
Continuous Glucose Monitoring ◽  
Glucose Monitoring ◽  
Hospitalized Patients ◽  
Accuracy And Precision

Development and Validation of HPLC/UV-Spectrophotometric Procedures for Metronidazole Quantitative Determination

2018 ◽  
Vol 9 (3) ◽  
Author(s):  
Klimenko Lina Yu ◽  
Shkarlat Galyna L ◽  
Shovkova Zoia V ◽  
Yaremenko Vitaliy D ◽  
Shpychak Oleg S
Keyword(s):  
Quantitative Determination ◽  
Sodium Hydroxide Solution ◽  
Gradient Elution ◽  
Calibration Model ◽  
Column Temperature ◽  
Medical Laboratories ◽  
Accuracy And Precision ◽  
Development And Validation ◽  
Gradient Elution Mode ◽  
Potential Object

Metronidazole is the most popular representative of antiprotozoal medicines from the group of 5-nitroimidazoles. Metronidazole blocks the enzymes of alcohol dehydrogenase and acetaldehyde dehydrogenase, therefore when its joint taking with alcohol it is observed the strong intoxication syndrome and fatal poisonings too. Therefore metronidazole can be a potential object of chemical toxicological investigations. The purpose of our paper is to develop HPLC/UV-procedure of metronidazole quantification with application of the system of HPLC-analyzer MiLiChrome® A-0230 implemented in practice of forensic medical laboratories in Russia and Ukraine and carry out step-by-step validation of the developed procedure. Chromatographic conditions: Eluent A (0.2 M LiClO4 – 0.005 M HClO4) and Eluent B (acetonitrile) wereused as the mobile phase components; HPLC microcolumn Ø2×75 mm and ProntoSIL 120-5-C18 AQ, 5 μm were used as an analytical column; temperature was 40°С; flow rate was 100 μl/min; gradient elution mode was from 5% to 100% Eluent B for 40 min, then 100% Eluent B for 3 min; detection was performed at 277 nm. Retention time for metronidazole is 5.95 min. Since metronidazole is easy soluble and stable enough in the solutions of diluted alkalis 0.001 M sodium hydroxide solution has been proposed for preparation of the solutions in developing HPLC/UV-procedure of metronidazole quantification. Validation of the procedure has been carried out in the variants of the method of calibration curve and method of standard by such parameters as in process stability, linearity/calibration model, accuracy and precision within 3 different analytical runs using different batches of reagents and different glassware; experiments have been performed by three different analysts. New procedure of metronidazole quantitative determination by the method of HPLC/UV has been developed. Its validation has been carried out and acceptability for application has been shown.

Pengaruh Kompetensi Coder terhadap Keakuratan dan Ketepatan Pengkodean Menggunakan ICD 10 di Rumah Sakit X Pekanbaru Tahun 2016

2018 ◽  
Vol 1 (1) ◽  
pp. 31-43
Author(s):  
Nur Maimun ◽  
Jihan Natassa ◽  
Wen Via Trisna ◽  
Yeye Supriatin
Keyword(s):  
Medical Record ◽  
Human Error ◽  
Medical Personnel ◽  
Quality Of Data ◽  
Accuracy And Precision ◽  
Result Show ◽  
Study Implementation ◽  
Icd 10 ◽  
The Cost

The accuracy in administering the diagnosis code was the important matter for medical recorder, quality of data was the most important thing for health information management of medical recorder. This study aims to know the coder competency for accuracy and precision of using ICD 10 at X Hospital in Pekanbaru. This study was a qualitative method with case study implementation from five informan. The result show that medical personnel (doctor) have never received a training about coding, doctors writing that hard and difficult to read, failure for making diagnoses code or procedures, doctor used an usual abbreviations that are not standard, theres still an officer who are not understand about the nomenclature and mastering anatomy phatology, facilities and infrastructure were supported for accuracy and precision of the existing code. The errors of coding always happen because there is a human error. The accuracy and precision in coding very influence against the cost of INA CBGs, medical and the committee did most of the work in the case of severity level III, while medical record had a role in monitoring or evaluation of coding implementation. If there are resumes that is not clearly case mix team check file needed medical record the result the diagnoses or coding for conformity. Keywords: coder competency, accuracy and precision of coding, ICD 10

Determination of Selected Phthalates in Some Commercial Cosmetic Products by HPLC-UV

2020 ◽  
Vol 23 (10) ◽  
pp. 1010-1022
Author(s):  
Emrah Dural
Keyword(s):  
High Performance ◽  
Phthalate Esters ◽  
High Sensitivity ◽  
Hplc Method ◽  
Cosmetic Products ◽  
Limit Of Quantification ◽  
Nail Polish ◽  
Accuracy And Precision ◽  
Butyl Phthalate

Aim and scope: Due to the serious toxicological risks and their widespread use, quantitative determination of phthalates in cosmetic products have importance for public health. The aim of this study was to develop a validated simple, rapid and reliable high-performance liquid chromatography (HPLC) method for the determination of phthalates which are; dimethyl phthalate (DMP), diethyl phthalate (DEP), benzyl butyl phthalate (BBP), di-n-butyl phthalate (DBP), di(2- ethylhexyl) phthalate (DEHP), in cosmetic products and to investigate these phthalate (PHT) levels in 48 cosmetic products marketing in Sivas, Turkey. Materials and Methods: Separation was achieved by a reverse-phase ACE-5 C18 column (4.6 x 250 mm, 5.0 μm). As the mobile phase, 5 mM KH2PO4 and acetonitrile were used gradiently at 1.5 ml min-1. All PHT esters were detected at 230 nm and the run time was taking 21 minutes. Results: This method showed the high sensitivity value the limit of quantification (LOQ) values for which are below 0.64 μg mL-1 of all phthalates. Method linearity was ≥0.999 (r2). Accuracy and precision values of all phthalates were calculated between (-6.5) and 6.6 (RE%) and ≤6.2 (RSD%), respectively. Average recovery was between 94.8% and 99.6%. Forty-eight samples used for both babies and adults were successfully analyzed by the developed method. Results have shown that, DMP (340.7 μg mL-1 ±323.7), DEP (1852.1 μg mL-1 ± 2192.0), and DBP (691.3 μg mL-1 ± 1378.5) were used highly in nail polish, fragrance and cream products, respectively. Conclusion: Phthalate esters, which are mostly detected in the content of fragrance, cream and nail polish products and our research in general, are DEP (1852.1 μg mL-1 ± 2192.0), DBP (691.3 μg mL-1 ± 1378.5) and DMP (340.7 μg mL-1 ±323.7), respectively. Phthalates were found in the content of all 48 cosmetic products examined, and the most detected phthalates in general average were DEP (581.7 μg mL-1 + 1405.2) with a rate of 79.2%. The unexpectedly high phthalate content in the examined cosmetic products revealed a great risk of these products on human health. The developed method is a simple, sensitive, reliable and economical alternative for the determination of phthalates in the content of cosmetic products, it can be used to identify phthalate esters in different products after some modifications.

Recent Applications of High Performance Thin Layer Chromatography and Derivative Spectrophotometry in Pharmaceutical Analysis

2020 ◽  
Vol 16 (6) ◽  
pp. 671-689
Author(s):  
Marcin Gackowski ◽  
Marcin Koba ◽  
Katarzyna Mądra-Gackowska ◽  
Piotr Kośliński ◽  
Stefan Kruszewski
Keyword(s):  
Thin Layer ◽  
Thin Layer Chromatography ◽  
Pharmaceutical Analysis ◽  
High Performance ◽  
Degradation Products ◽  
Derivative Spectrophotometry ◽  
Accuracy And Precision ◽  
Post Marketing ◽  
Layer Chromatography

At present, no one can imagine drug development, marketing and post-marketing without rigorous quality control at each stage. Only modern, selective, accurate and precise analytical methods for determination of active compounds, their degradation products and stability studies are able to assure the appropriate amount and purity of drugs administered every day to millions of patients all over the world. For routine control of drugs simple, economic, rapid and reliable methods are desirable. The major focus of current scrutiny is placed on high-performance thin layer chromatography and derivative spectrophotometry methods, which fulfill routine drug estimation’s expectations [1-4]. The present paper reveals state-of-the-art and possible applications of those methods in pharmaceutical analysis between 2010 and 2018. The review shows advantages of high-performance thin layer chromatography and derivative spectrophotometry, including accuracy and precision comparable to more expensive and time-consuming methods as well as additional fields of possible applications, which contribute to resolving many analytical problems in everyday laboratory practice.

Sign in / Sign up

Export Citation Format

Share Document