Workspace Analysis of a Six-Degrees of Freedom, Three-Prismatic- Prismatic-Spheric-Revolute Parallel Manipulator

2000 ◽  
Vol 16 (6) ◽  
pp. 441-449 ◽  
Author(s):  
M. Z. A. Majid ◽  
Z. Huang ◽  
Y. L. Yao
Keyword(s):  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Six Degrees Of Freedom ◽  
Workspace Analysis

Determination of the Workspace of a Three-Degrees-of-Freedom Parallel Manipulator Using a Three-Dimensional Computer-Aided-Design Software Package and the Concept of Virtual Chains1

2015 ◽  
Vol 8 (2) ◽  
Author(s):  
Andrew Johnson ◽  
Xianwen Kong ◽  
James Ritchie
Keyword(s):  
Computer Aided Design ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Graphical Representation ◽  
Three Dimensional ◽  
Parallel Manipulators ◽  
Workspace Analysis ◽  
Computer Aided ◽  
Aided Design

The determination of workspace is an essential step in the development of parallel manipulators. By extending the virtual-chain (VC) approach to the type synthesis of parallel manipulators, this technical brief proposes a VC approach to the workspace analysis of parallel manipulators. This method is first outlined before being illustrated by the production of a three-dimensional (3D) computer-aided-design (CAD) model of a 3-RPS parallel manipulator and evaluating it for the workspace of the manipulator. Here, R, P and S denote revolute, prismatic and spherical joints respectively. The VC represents the motion capability of moving platform of a manipulator and is shown to be very useful in the production of a graphical representation of the workspace. Using this approach, the link interferences and certain transmission indices can be easily taken into consideration in determining the workspace of a parallel manipulator.

Construction of a Six-Degrees-of-Freedom Parallel Manipulator With Three Planarly Actuated Links

1996 ◽  
Author(s):  
Ronen Ben-Horin ◽  
Moshe Shoham
Keyword(s):  
Parallel Manipulator ◽  
High Performance ◽  
Degrees Of Freedom ◽  
Parallel Robot ◽  
Simple Design ◽  
Output Link ◽  
Coordinated Motion ◽  
Six Degrees Of Freedom ◽  
Work Volume ◽  
New Type

Abstract The construction of a new type of a six-degrees-of-freedom parallel robot is presented in this paper. Coordinated motion of three planar motors, connected to three fixed-length links, produces a six-degrees-of-freedom motion of an output link. Its extremely simple design along with much larger work volume make this high performance-to-simplicity ratio robot very attractive.

A 2(3-RRPS) parallel manipulator inspired by Gough–Stewart platform

Robotica ◽  
2012 ◽  
Vol 31 (3) ◽  
pp. 381-388 ◽  
Author(s):  
Jaime Gallardo-Alvarado ◽  
Mario A. García-Murillo ◽  
Eduardo Castillo-Castaneda
Keyword(s):  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Screw Theory ◽  
Parallel Manipulators ◽  
Forward Kinematics ◽  
Triangular Prism ◽  
Input Output ◽  
Six Degrees Of Freedom ◽  
Moving Platform

SUMMARYThis study addresses the kinematics of a six-degrees-of-freedom parallel manipulator whose moving platform is a regular triangular prism. The moving and fixed platforms are connected to each other by means of two identical parallel manipulators. Simple forward kinematics and reduced singular regions are the main benefits offered by the proposed parallel manipulator. The Input–Output equations of velocity and acceleration are systematically obtained by resorting to reciprocal-screw theory. A case study, which is verified with the aid of commercially available software, is included with the purpose to exemplify the application of the method of kinematic analysis.

Workspace Optimization of a Six Degrees of Freedom Parallel Manipulator for Micromachining

2010 ◽  
Author(s):  
Ahmet Agaoglu ◽  
Namik Ciblak ◽  
Koray K. Safak
Keyword(s):  
Numerical Analysis ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Base Plane ◽  
Six Degrees Of Freedom ◽  
Moving Platform ◽  
Workspace Optimization ◽  
Kinematic Diagram ◽  
Orientation Workspace

This work addresses the optimization of the workspace of a six degrees of freedom parallel manipulator. In this study, The topology of the manipulator is composed of three xy-tables, symmetrically positioned on a circle on a base plane, connected by three legs to a moving platform. Kinematic composition of the manipulator is introduced and kinematic diagram is illustrated. Orientation workspace is investigated using three different orientation representations. XYZ fixed angles representation is selected considering the benefits of its visualization are considered. By using this representation, the orientation workspace is modeled and kinematic circuits of the manipulator are explored. First, optimization is performed without slider limitations. A result table is obtained based on the user defined parameters. Secondly, optimization is performed under slider limitations. The maximal orientation capability is optimized using numerical analysis. The optimized configuration of the manipulator indicates that a 330% increase in orientation capability is achieved, compared to the old configuration.

Orientation Workspace Analysis of a Novel 3SPS+1PS Symmetrical Parallel Manipulator Based on Unit Quaternion

2011 ◽  
Vol 201-203 ◽  
pp. 1849-1853
Author(s):  
Jing Li Yu ◽  
Gang Cheng ◽  
Shuai Zhang ◽  
De Kun Zhang
Keyword(s):  
Inverse Kinematics ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Unit Quaternion ◽  
Structure Characteristics ◽  
Workspace Analysis ◽  
Moving Platform ◽  
Position And Orientation ◽  
4 Degrees Of Freedom ◽  
Orientation Workspace

For a novel 3SPS+1PS parallel manipulator with 4 degrees of freedom including three rotations and one translation, the formulae for solving the inverse kinematics equations are derived based on quaternion method. Unit quaternion is used to represent the position and orientation of moving platform, and the singularities caused by Euler angles are avoided. Combining the topological structure characteristics of the parallel manipulator, it only has three rotations when its moving platform is at a given translation position. Based on the inverse position/pose equations and the all the constraints of the parallel manipulator, the discrete algorithm for the orientation workspaces of 3SPS+1PS parallel manipulator where the moving platform is at some different given translation positions are designed. The research builds the theoretical basis for optimizing the orientation workspace with given position.

Kinematic analysis and path planning of a new kinematically redundant planar parallel manipulator

Robotica ◽  
2008 ◽  
Vol 26 (3) ◽  
pp. 405-413 ◽  
Author(s):  
Iman Ebrahimi ◽  
Juan A. Carretero ◽  
Roger Boudreau
Keyword(s):  
Path Planning ◽  
Condition Number ◽  
Kinematic Analysis ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Six Degrees Of Freedom ◽  
Displacement Problem ◽  
Singular Configurations ◽  
Planar Parallel Manipulator

SUMMARYIn this work, the 3-RPRR, a new kinematically redundant planar parallel manipulator with six-degrees-of-freedom, is presented. First, the manipulator is introduced and its inverse displacement problem discussed. Then, all types of singularities of the 3-RPRR manipulator are analysed and demonstrated. Thereafter, the dexterous workspace is geometrically obtained and compared with the non-redundant 3-PRR planar parallel manipulator. Finally, based on a geometrical measure of proximity to singular configurations and the condition number of the manipulators' Jacobian matrices, actuation schemes for the manipulators are obtained. Different actuation schemes for a given path are obtained and the quality of their actuation schemes are compared. It is shown that the proposed manipulator is capable of following a path while avoiding the singularities.

An Analytical Model for Calculating the Workspace of a Flexure Hexapod Nanopositioner

2013 ◽  
Vol 5 (4) ◽  
Author(s):  
Hongliang Shi ◽  
Hai-Jun Su
Keyword(s):  
Analytical Model ◽  
Degrees Of Freedom ◽  
Kinematic Model ◽  
Parallel Mechanisms ◽  
Torsion Angles ◽  
Maximum Deformation ◽  
Practical Applications ◽  
Six Degrees Of Freedom ◽  
Workspace Analysis ◽  
Flexure Joints

This paper presents an analytical model for calculating the workspace of a flexure-based hexapod nanopositioner previously built by the National Institute of Standards and Technology (NIST). This nanopositioner is capable of producing high-resolution motions in six degrees of freedom by actuating linear actuators on a planar tri-stage. However, the workspace of this positioner is still unknown, which limits its uses in practical applications. In this work, we seek to derive a kinematic model for predicting the workspace of such kinds of flexure based platforms by assuming that their workspace is mainly constrained by the deformation of flexure joints. We first study the maximum deformation including bending and torsion angles of an individual flexure joint. We then derive the inverse kinematics and calculation of bending and torsion angles of each wire flexure in the overall mechanism with given position of the top platform center of the hexapod nanopositioner. At last, we compare results with finite element models of the entire platform. This model is beneficial for workspace analysis and optimization for design of compliant parallel mechanisms.

On the optimum design of Stewart platform type parallel manipulators

Robotica ◽  
1995 ◽  
Vol 13 (2) ◽  
pp. 133-140 ◽  
Author(s):  
Soumya Bhattacharya ◽  
H. Hatwal ◽  
A. Ghosh
Keyword(s):  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Axial Loading ◽  
Parallel Manipulators ◽  
Stewart Platform ◽  
Parallel System ◽  
Design Parameters ◽  
Programming Technique ◽  
Six Degrees Of Freedom ◽  
Static Rigidity

SummaryThis paper studies the static rigidity behaviour of a parallel manipulator with legs modelled as elastic members under axial loading. Structurally, a parallel module is more rigid compared to a serial module and is expected to take heavier payloads. Therefore, a guidance for design of such parallel manipulators is needed which leads to maximum rigidity over the workspace. In the present work, the authors propose the concept of the flexibility ellipsoid for a parallel system. Various scalar measures of rigidity are formulated on the basis of the proposed ellipsoid. An algorithm, involving multiple objective nonlinear programming technique, is implemented to decide upon some important design parameters of a generalised six degrees of freedom Stewart platform type parallel manipulator. It is observed that irrespective of the other parameters, parallel manipulators with the legs pairwise joined at the top platform possess the highest rigidity. Moreover, there exists certain kinematic dimensions for which the designed parallel system is completely free from all sorts of singularity.

Simulation of kinematic and workspace analysis of 3-PRS parallel manipulator

2015 ◽  
Vol 06 (01) ◽  
pp. 1550007 ◽  
Author(s):  
Y. D. Patel ◽  
P. M. George
Keyword(s):  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Advanced Technology ◽  
Effective Utilization ◽  
Closed Form Solutions ◽  
Current State ◽  
Kinematics Simulation ◽  
Complex Process ◽  
Workspace Analysis ◽  
Interior Singularity

In the present era, the competitive producers are forced to use maximally newer advanced technology and its effective fast implementation using various available tools for synthesis of new product requirement. Use of current state of art computer aided technology supports the creation of flexible assemblies and their built up though unified modular approach. The design of robotic mechanism is a complex process involving geometric, kinematic, singularity analyses during its synthesis phase. The present work is aimed at the effective utilization of CAx system Pro/Engineer tools for creation, ease in modification and analysis of spatial parallel manipulator. Three degrees of freedom of 3-PRS parallel manipulator is obtained using mobility analysis. Parallel manipulator with 3-DOF with 3-PRS configuration is investigated. The kinematics simulation of the robot is carried out using mechanism simulation and compared with closed form solutions. The concept of reachable, orientation and dexterous workspace is expressed. Tool tip coordinates obtained through simulation are plotted for workspace development. Inner and outer workspace boundaries are developed and analyzed for four different cases to understand the problem of interior singularity within workspace.

Sign in / Sign up

Export Citation Format

Share Document