Particleboard I.B. forecast by TMA bending in MUF adhesives curing

2000 ◽  
Vol 58 (4) ◽  
pp. 288-289 ◽  
Author(s):  
C. Kamoun ◽  
A. Pizzi
Keyword(s):  
Muf Adhesives

scholarly journals THE SOY FLOUR AS AN EXTENDER FOR UF AND MUF ADHESIVES IN BIRCH PLYWOOD PRODUCTION

Wood Research ◽  
2021 ◽  
Vol 66 (6) ◽  
pp. 1015-1031
Author(s):  
JAKUB KAWALERCZYK ◽  
JOANNA SIUDA ◽  
DOROTA DZIURKA ◽  
RADOSŁAW MIRSKI ◽  
MAGDALENA WOŹNIAK ◽  
...  
Keyword(s):  
Chemical Interaction ◽  
Urea Formaldehyde ◽  
Formaldehyde Emission ◽  
Solid Content ◽  
Urea Formaldehyde Resin ◽  
Soy Flour ◽  
Formaldehyde Resin ◽  
Gel Time ◽  
Major Disadvantage ◽  
Muf Adhesives

Formaldehyde emission still remains a major disadvantage of widely applied formaldehyde-containing amino resins such as UF (urea-formaldehyde) resin and MUF (melamine-urea-formaldehyde) resin. The compositions of adhesives for plywood manufacturing have to contain a proper extenders in order to adjust their viscosity. Thus, the aim of the study was to investigate the effect of protein-rich soy flour (SF) as the extender for adhesives. The composition of flours and their ability to absorb the formaldehyde were determined. Properties of liquid resins such as gel time, viscosity, pH and solid content were investigated. The possible chemical interaction between the extenders and resins were assessed with the use of FTIR spectroscopy. Plywood panels manufactured using UF and MUF adhesives with the soy flour introduced as the extender in various concentrations were tested in terms of shear strength and formaldehyde release. Studies have shown that soy flour has a favorable composition and formaldehyde-scavenging ability. The addition of SF affected resins properties such as viscosity and gel time but showed no influence on their pH and solid content. FTIR analysis has not explained the chemical interaction between resin and extender. The application of soy flour in the concentration of 15% for UF resin and 10% for MUF resin allowed to produce plywood characterized by improved bonding quality and decreased formaldehyde emission.

scholarly journals Utilization of Partially Liquefied Bark for Production of Particleboards

2020 ◽  
Vol 10 (15) ◽  
pp. 5253 ◽  
Author(s):  
Wen Jiang ◽  
Stergios Adamopoulos ◽  
Reza Hosseinpourpia ◽  
Jure Žigon ◽  
Marko Petrič ◽  
...  
Keyword(s):  
Bending Strength ◽  
Urea Formaldehyde ◽  
Value Added ◽  
Thickness Swelling ◽  
Mechanical And Physical Properties ◽  
Dry Conditions ◽  
Synthetic Adhesives ◽  
European Standards ◽  
Muf Adhesives

Bark as a sawmilling residue can be used for producing value-added chemicals and materials. This study investigated the use of partially liquefied bark (PLB) for producing particleboard with or without synthetic adhesives. Maritime pine (Pinus pinaster Ait.) bark was partially liquefied in the presence of ethylene glycol and sulfuric acid. Four types of particleboard panels were prepared with a PLB content of 4.7%, 9.1%, 20%, and 33.3%, respectively. Another five types of particleboard panels were manufactured by using similar amounts of PLB and 10 wt.% of melamine–urea–formaldehyde (MUF) adhesives. Characterization of bark and solid residues of PLB was performed by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and automated vapor sorption (AVS). Mechanical and physical properties of the particleboard were tested according to the European standards EN 310 for determining modulus of elasticity and bending strength, EN 317 for determining thickness swelling after immersion in water, and EN 319 for determining internal bond strength. The results showed that the increase in PLB content improved the mechanical strength for the non-MUF boards, and the MUF-bonded boards with up to 20% of PLB met the requirements for interior uses in dry conditions according to EN 312. The non-MUF boards containing 33.3% of PLB and the MUF-bonded boards showed comparable thickness swelling and water absorption levels compared to the reference board.

Effect of resin content on the physiochemical and combustion properties of wood fiber insulation board

BioResources ◽  
2020 ◽  
Vol 15 (3) ◽  
pp. 5210-5225
Author(s):  
Se-Hwi Park ◽  
Min Lee ◽  
Pureun-Narae Sun ◽  
Eun-Chang Kang
Keyword(s):  
Urea Formaldehyde ◽  
Wood Fiber ◽  
Fire Retardant ◽  
Expanded Polystyrene ◽  
Resin Content ◽  
Adhesive Resin ◽  
Combustion Properties ◽  
Materials Used ◽  
Industrial Standards ◽  
Muf Adhesives

As petrochemical products (including plastics) contribute to the destruction of the natural environment, the use of such products must be reduced. Plastics account for 90% of the insulation materials used in Korea, including extruded polystyrene (EPS), expanded polystyrene (XPS), and urethane foam. Wood-fiber insulation board (WIB) is a promising natural alternative to petrochemical insulation. This study aimed to determine the optimal amount of adhesive resin required for manufacturing WIB. Fire-resistant WIB was prepared with a melamine-urea-formaldehyde (MUF) resin (ranging from 20% to 35%), and the physicochemical and fire-resistant properties were determined. Higher resin content led to improved physical properties, while the thermal conductivity was unaffected. With the exception of 35% resin content in the WIB, the formaldehyde emissions of the WIB samples complied with the Korean Industrial Standards requirements for Super E0 grade (less than 0.3 mg per L). The physicochemical properties of the WIB samples were sufficient for use as an insulating material, even at 20% resin content. A perpendicular flame test revealed that all samples formed a carbonized layer to prevent flame penetration, except for the specimen with 20% of the resin content. The cone calorimeter testing indicated that the MUF adhesives acted as an effective fire retardant at resin contents above 25%.

Upgrading of MUF adhesives for particleboard production using oligomers of hyperbranched poly(amine-ester)

2013 ◽  
Vol 27 (9) ◽  
pp. 1058-1068 ◽  
Author(s):  
X. Zhou ◽  
H.A. Essawy ◽  
A. Pizzi ◽  
X. Li ◽  
K. Rode ◽  
...  
Keyword(s):  
Hyperbranched Poly ◽  
Muf Adhesives

Honeymoon MUF adhesives for exterior grade glulam

2001 ◽  
Vol 59 (6) ◽  
pp. 413-421 ◽  
Author(s):  
M. Properzi ◽  
A. Pizzi ◽  
L. Uzielli
Keyword(s):  
Exterior Grade ◽  
Muf Adhesives

scholarly journals Particle Board and Oriented Strand Board Prepared with Nanocellulose-Reinforced Adhesive

2012 ◽  
Vol 2012 ◽  
pp. 1-8 ◽  
Author(s):  
Stefan Veigel ◽  
Jörn Rathke ◽  
Martin Weigl ◽  
Wolfgang Gindl-Altmutter
Keyword(s):  
Bending Strength ◽  
Oriented Strand Board ◽  
Urea Formaldehyde ◽  
Cellulose Nanofibers ◽  
Strength Properties ◽  
Particle Board ◽  
Adhesive Bonds ◽  
Adhesive Mixtures ◽  
Scale Particle ◽  
Muf Adhesives

Adhesives on the basis of urea-formaldehyde (UF) and melamine-urea-formaldehyde (MUF) are extensively used in the production of wood-based panels. In the present study, the attempt was made to improve the mechanical board properties by reinforcing these adhesives with cellulose nanofibers (CNFs). The latter were produced from dissolving grade beech pulp by a mechanical homogenization process. Adhesive mixtures with a CNF content of 0, 1, and 3 wt% based on solid resin were prepared by mixing an aqueous CNF suspension with UF and MUF adhesives. Laboratory-scale particle boards and oriented strand boards (OSBs) were produced, and the mechanical and fracture mechanical properties were investigated. Particle boards prepared with UF containing 1 wt% CNF showed a reduced thickness swelling and better internal bond and bending strength than boards produced with pure UF. The reinforcing effect of CNF was even more obvious for OSB where a significant improvement of strength properties of 16% was found. For both, particle board and OSB, mode I fracture energy and fracture toughness were the parameters with the greatest improvement indicating that the adhesive bonds were markedly toughened by the CNF addition.

Effects of steaming process on some properties of eucalyptus particleboard bonded with UF and MUF adhesives

2007 ◽  
Vol 42 (1) ◽  
pp. 304-309 ◽  
Author(s):  
Semra Çolak ◽  
Gürsel Çolakoğlu ◽  
Ismail Aydin ◽  
Hülya Kalaycioğlu
Keyword(s):  
Muf Adhesives
Sign in / Sign up

Export Citation Format

Share Document