Simplifying convective heat and mass transfer in moisture desorption of beech wood by introducing characteristic transfer coefficients

2000 ◽  
Vol 58 (1-2) ◽  
pp. 96-101 ◽  
Author(s):  
A. Dedic
Keyword(s):  
Mass Transfer ◽  
Heat And Mass Transfer ◽  
Convective Heat ◽  
Beech Wood ◽  
Transfer Coefficients ◽  
Moisture Desorption

Evaluation of Convective Heat and Mass Transfer in Open Sun and Green House Drying

2008 ◽  
Author(s):  
S. K. Shukla
Keyword(s):  
Mass Transfer ◽  
Heat And Mass Transfer ◽  
Convective Heat ◽  
Ambient Air ◽  
Natural Mode ◽  
Transfer Coefficients ◽  
Drying Time ◽  
Sun Drying ◽  
Green House ◽  
Hourly Data

In this communication, a study on open sun and green house drying has been performed to evaluate the convective heat and mass transfer coefficients as a function of climatic parameters. The hourly data for the rate of moisture removal, crop temperature, relative humidity inside greenhouse and outside greenhouse and ambient air temperature for complete drying have been recorded. The experiments were done in the premises of Allahabad Agricultural Institute-Deemed University, after the crop-harvesting season from February 2006 to April 2006. Using these data, the value of convective heat and mass transfer in open sun drying (OSD) and green house sun drying (GHD) under natural and forced convection mode, have been calculated. Also the empirical relations of convective heat and mass transfer with drying time under natural and forced modes have been developed. On the basis of the present study, it is inferred that the value of convective heat and mass transfer is more in open sun drying than in the green house drying under natural convection mode. However its value increases in forced mode of greenhouse drying as compared to natural mode in the initial stage of drying.

Empirical Evaluation of Convective Heat and Moisture Transport Coefficients in Porous Cotton Medium

2002 ◽  
Vol 124 (3) ◽  
pp. 530-537 ◽  
Author(s):  
Kamel Ghali ◽  
Nesreen Ghaddar ◽  
Byron Jones
Keyword(s):  
Mass Transfer ◽  
Heat And Mass Transfer ◽  
Convective Heat ◽  
Transport Coefficients ◽  
Model Parameters ◽  
Moisture Uptake ◽  
Transfer Coefficients ◽  
Mass Transfer Coefficients ◽  
Air Penetration ◽  
Heat And Moisture

The air penetration within a porous clothing system on a moving human being is an important physical process that considerably affects the heat and moisture resistance of the textile material. This effect of the coupled convection heat and mass exchange within the clothing system is experimentally investigated and theoretically modeled to determine the heat and mass transfer coefficients between the air penetrating the void space and the solid fiber as a function of the velocity of penetrating air. Experiments were conducted inside environmentally controlled chambers to measure the transient moisture uptake of untreated cotton fabric samples as well as the outer fabric temperature using an infrared pyrometer. The moisture uptake was conducted at three different volumetric flow rates of 0.0067, 0.018 and 0.045 m3/sec/m2 of fabric area to represent airflow penetrations that could result from slow, medium, and vigorous walking, respectively. The theoretical analysis is based on a two-node adsorption model of the fibrous medium. A set of four coupled differential equations were derived describing time-dependent convective heat and mass transfer between the penetrating air and the solid fiber in terms of relevant unknown transport coefficients. The unknown model parameters were adjusted to fit the experimental data. The outer heat and mass transfer coefficients were found to increase with the air penetration flow rate.

Free Convective Heat and Mass Transfer in a Doubly Stratified Non-Darcy Porous Medium

2006 ◽  
Vol 128 (11) ◽  
pp. 1204-1212 ◽  
Author(s):  
P. A. Lakshmi Narayana ◽  
P. V. S. N. Murthy
Keyword(s):  
Mass Transfer ◽  
Porous Medium ◽  
Heat And Mass Transfer ◽  
Convective Heat ◽  
Vertical Direction ◽  
Vertical Surface ◽  
Transfer Coefficients ◽  
Double Stratification ◽  
Complex Interactions ◽  
Inertia Parameter

Free convective heat and mass transfer from a vertical surface embedded in a doubly stratified non-Darcy porous medium has been analyzed. The wall temperature and concentration are constant and the medium is linearly stratified in the vertical direction with respect to both temperature, and concentration. A series approximation is made for stream function, temperature, and concentration in terms of the stratification parameter. The flow, temperature, and concentration fields are affected by the complex interactions among the diffusion ratio Le, buoyancy ratio N and stratification ratio Sr in addition to the inertia parameter Fc. The effect of double stratification of the medium on nondimensional heat and mass transfer coefficients is discussed.

scholarly journals Drying and Heating Processes in Arbitrarily Shaped Clay Materials Using Lumped Phenomenological Modeling

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4294
Author(s):  
Elisiane S. Lima ◽  
João M. P. Q. Delgado ◽  
Ana S. Guimarães ◽  
Wanderson M. P. B. Lima ◽  
Ivonete B. Santos ◽  
...  
Keyword(s):  
Mass Transfer ◽  
Relative Humidity ◽  
Heat And Mass Transfer ◽  
Convective Heat ◽  
Transport Coefficients ◽  
Ceramic Materials ◽  
Raw Material ◽  
Transfer Coefficients ◽  
Mass Transfer Coefficients ◽  
Mass Transfers

This work aims to study the drying of clay ceramic materials with arbitrary shapes theoretically. Advanced phenomenological mathematical models based on lumped analysis and their exact solutions are presented to predict the heat and mass transfers in the porous material and estimate the transport coefficients. Application has been made in hollow ceramic bricks. Different simulations were carried out to evaluate the effect of drying air conditions (relative humidity and speed) under conditions of forced and natural convection. The transient results of the moisture content and temperature of the brick, and the convective heat and mass transfer coefficients are presented, discussed and compared with experimental data, obtaining a good agreement. It was found that the lower the relative humidity is and the higher the speed of the drying air is, the higher the convective heat and mass transfer coefficients are at the surface of the brick and in the holes, and the faster the moisture removal material and heating is. Based on the predicted results, the best conditions for brick drying were given. The idea is to increase the quality of the brick after the process, to reduce the waste of raw material and energy consumption in the process.

Sign in / Sign up

Export Citation Format

Share Document