ARNICA, the NICMOS 3 imaging camera of TIRGO

1995 ◽  
pp. 373-374
Author(s):  
Franco Lisi ◽  
Carlo Baffa ◽  
Leslie Hunt ◽  
Ruggero Stanga
Keyword(s):  
Imaging Camera ◽  
Nicmos 3

The Diverging Collimator

1970 ◽  
Vol 09 (01) ◽  
pp. 84-94
Author(s):  
G. Muehllehner
Keyword(s):  
Unit Area ◽  
Field Of View ◽  
Imaging Camera ◽  
Good Agreement ◽  
Parallel Hole

SummaryThe diverging collimator makes it possible to increase the field of view of a radioisotope imaging camera. The larger field of view is obtained by sacrificing efficiency per unit area of the field of view while preserving the resolution of the system. This situation is analogous to that of the scanner, where the efficiency per unit area is inversely proportional to the total area scanned.Efficiency and resolution of diverging collimators can be calculated quite accurately as is evidenced by the good agreement between calculated and measured values. The problem of septum penetration, however, needs to be further investigated for both parallel-hole as well as diverging collimators, so that the influence of the shape and arrangement of the holes upon septum penetration is taken into account.

Ocular surface temperature differences in glaucoma

2021 ◽  
pp. 112067212110237
Author(s):  
Ari Leshno ◽  
Ori Stern ◽  
Yaniv Barkana ◽  
Noa Kapelushnik ◽  
Reut Singer ◽  
...  
Keyword(s):  
Surface Temperature ◽  
Thermal Imaging ◽  
Ocular Surface ◽  
Open Angle Glaucoma ◽  
Tissue Temperature ◽  
Body Temperatures ◽  
Current Thinking ◽  
Imaging Camera ◽  
The Mean ◽  
The Difference

Purpose: Accumulating evidence suggests that neuroinflammation and immune response are part of the sequence of pathological events leading to optic nerve damage in glaucoma. Changes in tissue temperature due to inflammation can be measured by thermographic imaging. We investigated the ocular surface temperature (OST) profile of glaucomatous eyes to better understand the pathophysiology of these conditions. Methods: Subjects diagnosed with glaucoma (primary open angle glaucoma [POAG] or pseudo exfoliation glaucoma [PXFG]) treated at the Sam Rothberg Glaucoma Center (11/2019–11/2020.) were recruited. Healthy subjects with no ocular disease served as controls. The Therm-App thermal imaging camera was used for OST acquisition. Room and body temperatures were recorded, and the mean temperatures of the medial cantus, lateral cantus, and cornea were calculated with image processing software. Results: Thermographic images were obtained from 52 subjects (52 eyes: 25 POAG and 27 PXFG) and 66 controls (66 eyes). Eyes with glaucoma had a significantly higher OST compared to controls (mean 0.9 ± 0.3°C, p < 0.005). The difference between the two groups remained significant after adjustment for age, sex, intraocular pressure (IOP) and room and body temperatures. Lens status and topical IOP-lowering medication did not significantly affect OST. A subgroup analysis revealed that the OST was higher among eyes with POAG compared to eyes with PXFG, but not significantly. Conclusions: Differences in the OST between glaucomatous and normal eyes strengthens current thinking that inflammation affects the pathophysiology of glaucoma. Longitudinal studies are warranted to establish the prognostic value of thermographic evaluations in these patients.

scholarly journals Thermal Imaging Study to Determine the Operational Condition of a Conveyor Belt Drive System Structure

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3258
Author(s):  
Dawid Szurgacz ◽  
Sergey Zhironkin ◽  
Stefan Vöth ◽  
Jiří Pokorný ◽  
A.J.S. (Sam) Spearing ◽  
...  
Keyword(s):  
Thermal Imaging ◽  
Thermal Condition ◽  
Thermal State ◽  
Operating Time ◽  
Imaging Study ◽  
Conveyor Belt ◽  
System Structure ◽  
Thermal Imaging Camera ◽  
Imaging Camera ◽  
Maintenance Service

The paper discusses the results of a study carried out to determine the thermal condition of a conveyor power unit using a thermal imaging camera. The tests covered conveyors in the main haulage system carrying coal from a longwall. The measurements were taken with a thermal imaging diagnostic method which measures infrared radiation emitted by an object. This technology provides a means of assessing the imminence and severity of a possible failure or damage. The method is a non-contact measuring technique and offers great advantages in an underground mine. The thermograms were analysed by comparing the temperature distribution. An analysis of the operating time of the conveyors was also carried out and the causes of the thermal condition were determined. The main purpose of the research was to detect changes in thermal state during the operation of a belt conveyor that could indicate failure and permit early maintenance and eliminate the chance of a fire. The article also discusses the construction and principle of operation of a thermal imaging camera. The findings obtained from the research analysis on determining the thermal condition of the conveyor drive unit are a valuable source of information for the mine’s maintenance service.

Neutron Imaging Camera

2009 ◽  
Author(s):  
Georgia A. de Nolfo ◽  
Stanley D. Hunter ◽  
Jason T. Link ◽  
Seunghee Son ◽  
Noel A. Guardala
Keyword(s):  
Neutron Imaging ◽  
Imaging Camera

scholarly journals Detection Capability Verification and Performance Test for the High Resolution Imaging Camera of China’s Tianwen-1 Mission

2021 ◽  
Vol 217 (6) ◽  
Author(s):  
Wei Yan ◽  
Jianjun Liu ◽  
Xin Ren ◽  
Chunlai Li ◽  
Qiang Fu ◽  
...  
Keyword(s):  
High Resolution ◽  
Data Processing ◽  
High Resolution Imaging ◽  
Martian Surface ◽  
Detection Capability ◽  
High Quality ◽  
Mars Exploration ◽  
Imaging Camera ◽  
High Resolution Images ◽  
Resolution Imaging

AbstractHigh-resolution optical cameras have always been important scientific payloads in Mars exploration missions, which can obtain detailed images of Martian surface for the study of geomorphology, topography and geological structure. At present, there are still many challenges for Mars high-resolution images in terms of global coverage, stereo coverage (especially for colour images), and data processing methods. High Resolution Imaging Camera (HiRIC) is a high-quality, multi-mode, multi-functional, multi-spectral remote sensing camera that is suitable for the deep space developed for China’s first Mars Exploration Mission (Tianwen-1), which was successfully launched in July 2020. Here we design special experiments based on the in-orbit detection conditions of Tianwen-1 mission to comprehensively verify the detection capability and the performance of HiRIC, from the aspects of image motion compensation effect, focusing effect, image compression quality, and data preprocessing accuracy. The results showed that the performance status of HiRIC meets the requirements of obtaining high resolution images on the Martian surface. Furthermore, proposals for HiRIC in-orbit imaging strategy and data processing are discussed to ensure the acquisition of high-quality HiRIC images, which is expected to serve as a powerful complementation to the current Mars high-resolution images.

HIGH-PRECISION IN-FLIGHT CALIBRATION USING UNKNOWN LANDMARKS

2021 ◽  
Vol 4 ◽  
pp. 117-124
Author(s):  
Alexander Tkachenko ◽  
Keyword(s):  
Good Accuracy ◽  
Star Tracker ◽  
Coordinate Frame ◽  
Geometric Calibration ◽  
The Earth ◽  
Imaging Camera ◽  
Calibration Accuracy ◽  
Combined Algorithm ◽  
Fuzzy State ◽  
Fuzzy State Observer

An in-flight geometric calibration (further — calibration) is interpreted here as a procedure of making more preceise mutual attitude parameters of the onboard imaging camera and the star tracker. The problem of calibration is solved with using of observations of the landmarks from the orbit. In this work, the landmarks are considered as unknown in the sense that they may be identified on the several snapshots, they may be associated with synchronous data of the star tracker and GPS, but their location in the Earth coordinate frame is unknown. While unknown markers are used, it is more complicated to provide high accuracy of calibration than when geo-referenced markers are observed. In such a situation, improvement of the onboard devices and gauges and increasing of their accuracy strenghtens advisability of agreement of attainable accuracy of calculations while in-flight geometric calibration with accessible measurings accuracy. It concerns properly calibration so as geo-referencing of space snaps using results of calibration. In particular, it is important to consider how accuracy of calibration depends on the accuracy of specific measurings and initial data. Actuality of the considered problem is indisputable. Without its solution, attraction of high-accurate measurings is senseless. A main means of investigation is computer simulanion and analysis of its results. The combined algorithm is proposed for the processing of the calibration measuring equations. It consists of two independent parts. The first one belongs to author of this work and is based on photogrammetric condition of collinearity The second part belongs to D.V. Lebedev and is based on photogrammetric condition of coplanarity. The method of state estimation with high convergence characteristics — fuzzy state observer — is used for resolving of measuring equations. The results of above-mentioned calibration are fully fit for the geo-referencing of the unknown ground objects with acceptable accuracy. Computer simulation had demonsrated good accuracy of the proposed method of the in-flight geometric calibration using unknown landmarks in a combination with high-precise characteristics of used technical means. The simulation had shown the calibration accuracy on the level of 5 arc sec and accuracy of the geo-referencing on the level of 10–20 m. It is fully comparable with accuracy when geo-referenced markers are observated.

scholarly journals Uncertainties in cloud phase and optical thickness retrievals from the Earth Polychromatic Imaging Camera (EPIC)

2016 ◽  
Vol 9 (4) ◽  
pp. 1785-1797 ◽  
Author(s):  
Kerry Meyer ◽  
Yuekui Yang ◽  
Steven Platnick
Keyword(s):  
Optical Thickness ◽  
Single Channel ◽  
Temperature Threshold ◽  
Retrieval Technique ◽  
Uncertainty Estimates ◽  
Imaging Camera ◽  
Cloud Temperature ◽  
Fixed Phase ◽  
Moderate Resolution Imaging Spectroradiometer ◽  
Visible Wavelengths

Abstract. This paper presents an investigation of the expected uncertainties of a single-channel cloud optical thickness (COT) retrieval technique, as well as a simple cloud-temperature-threshold-based thermodynamic phase approach, in support of the Deep Space Climate Observatory (DSCOVR) mission. DSCOVR cloud products will be derived from Earth Polychromatic Imaging Camera (EPIC) observations in the ultraviolet and visible spectra. Since EPIC is not equipped with a spectral channel in the shortwave or mid-wave infrared that is sensitive to cloud effective radius (CER), COT will be inferred from a single visible channel with the assumption of appropriate CER values for liquid and ice phase clouds. One month of Aqua MODerate-resolution Imaging Spectroradiometer (MODIS) daytime granules from April 2005 is selected for investigating cloud phase sensitivity, and a subset of these granules that has similar EPIC Sun-view geometry is selected for investigating COT uncertainties. EPIC COT retrievals are simulated with the same algorithm as the operational MODIS cloud products (MOD06), except using fixed phase-dependent CER values. Uncertainty estimates are derived by comparing the single-channel COT retrievals with the baseline bi-spectral MODIS retrievals. Results show that a single-channel COT retrieval is feasible for EPIC. For ice clouds, single-channel retrieval errors are minimal (< 2 %) due to the particle size insensitivity of the assumed ice crystal (i.e., severely roughened aggregate of hexagonal columns) scattering properties at visible wavelengths, while for liquid clouds the error is mostly limited to within 10 %, although for thin clouds (COT < 2) the error can be higher. Potential uncertainties in EPIC cloud masking and cloud temperature retrievals are not considered in this study.

Sign in / Sign up

Export Citation Format

Share Document