Dispersion of polar optical modes in cubic diatomic crystals

1975 ◽  
pp. 41-54
Author(s):  
J. Brandmüller ◽  
R. Claus ◽  
L. Merten
Keyword(s):  
Optical Modes

scholarly journals Four-dimensional vibrational spectroscopy for nanoscale mapping of phonon dispersion in BN nanotubes

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Ruishi Qi ◽  
Ning Li ◽  
Jinlong Du ◽  
Ruochen Shi ◽  
Yang Huang ◽  
...  
Keyword(s):  
Boron Nitride ◽  
Energy Loss ◽  
Phonon Dispersion ◽  
Hexagonal Boron Nitride ◽  
Real Space ◽  
Boron Nitride Nanotubes ◽  
Detection Sensitivity ◽  
Optical Modes ◽  
Optical And Mechanical Properties ◽  
Energy And Momentum

AbstractDirectly mapping local phonon dispersion in individual nanostructures can advance our understanding of their thermal, optical, and mechanical properties. However, this requires high detection sensitivity and combined spatial, energy and momentum resolutions, thus has been elusive. Here, we demonstrate a four-dimensional electron energy loss spectroscopy technique, and present position-dependent phonon dispersion measurements in individual boron nitride nanotubes. By scanning the electron beam in real space while monitoring both the energy loss and the momentum transfer, we are able to reveal position- and momentum-dependent lattice vibrations at nanometer scale. Our measurements show that the phonon dispersion of multi-walled nanotubes is locally close to hexagonal-boron nitride crystals. Interestingly, acoustic phonons are sensitive to defect scattering, while optical modes are insensitive to small voids. This work not only provides insights into vibrational properties of boron nitride nanotubes, but also demonstrates potential of the developed technique in nanoscale phonon dispersion measurements.

scholarly journals Near-Field Excitation of Bound States in the Continuum in All-Dielectric Metasurfaces through a Coupled Electric/Magnetic Dipole Model

Nanomaterials ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 998
Author(s):  
Diego R. Abujetas ◽  
José A. Sánchez-Gil
Keyword(s):  
Magnetic Dipole ◽  
Density Of States ◽  
Bound States ◽  
Local Density ◽  
Near Field ◽  
Field Pattern ◽  
Local Density Of States ◽  
Optical Modes ◽  
Source Excitation ◽  
The Continuum

Resonant optical modes arising in all-dielectric metasurfaces have attracted much attention in recent years, especially when so-called bound states in the continuum (BICs) with diverging lifetimes are supported. With the aim of studying theoretically the emergence of BICs, we extend a coupled electric and magnetic dipole analytical formulation to deal with the proper metasurface Green function for the infinite lattice. Thereby, we show how to excite metasurface BICs, being able to address their near-field pattern through point-source excitation and their local density of states. We apply this formulation to fully characterize symmetry-protected BICs arising in all-dielectric metasurfaces made of Si nanospheres, revealing their near-field pattern and local density of states, and, thus, the mechanisms precluding their radiation into the continuum. This formulation provides, in turn, an insightful and fast tool to characterize BICs (and any other leaky/guided mode) near fields in all-dielectric (and also plasmonic) metasurfaces, which might be especially useful for the design of planar nanophotonic devices based on such resonant modes.

scholarly journals Adaptive Shell Spherical Reflector Actuated with PVDF-TrFE Thin Film Strain Actuators

Actuators ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 7
Author(s):  
Kainan Wang ◽  
Thomas Godfroid ◽  
Damien Robert ◽  
André Preumont
Keyword(s):  
Thin Film ◽  
Active Material ◽  
Quadratic Model ◽  
Influence Functions ◽  
Regularization Technique ◽  
Thin Polymer ◽  
Optical Modes ◽  
Electrostrictive Material ◽  
Ill Conditioning ◽  
Good Agreement

This paper discusses the design and manufacturing of a thin polymer spherical adaptive reflector of diameter D=200 mm, controlled by an array of 25 independent electrodes arranged in a keystone configuration actuating a thin film of PVDF-TrFE in d31-mode. The 5 μm layer of electrostrictive material is spray-coated. The results of the present study confirm that the active material can be modelled by a unidirectional quadratic model and that excellent properties can be achieved if the material is properly annealed. The experimental influence functions of the control electrodes are determined by a quasi-static harmonic technique; they are in good agreement with the numerical simulations and their better circular symmetry indicates a clear improvement in the manufacturing process, as compared to a previous study. The low order optical modes can be reconstructed by combining the 25 influence functions; a regularization technique is used to alleviate the ill-conditioning of the Jacobian and allow to approximate the optical modes with reasonable voltages.

scholarly journals Quantum repeaters based on concatenated bosonic and discrete-variable quantum codes

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Filip Rozpędek ◽  
Kyungjoo Noh ◽  
Qian Xu ◽  
Saikat Guha ◽  
Liang Jiang
Keyword(s):  
Continuous Variable ◽  
Quantum Codes ◽  
Discrete Variable ◽  
Long Distance ◽  
Concatenated Code ◽  
Different Types ◽  
Optical Modes ◽  
Distance Communication ◽  
Quantum Repeaters ◽  
Quantum Error

AbstractWe propose an architecture of quantum-error-correction-based quantum repeaters that combines techniques used in discrete- and continuous-variable quantum information. Specifically, we propose to encode the transmitted qubits in a concatenated code consisting of two levels. On the first level we use a continuous-variable GKP code encoding the qubit in a single bosonic mode. On the second level we use a small discrete-variable code. Such an architecture has two important features. Firstly, errors on each of the two levels are corrected in repeaters of two different types. This enables for achieving performance needed in practical scenarios with a reduced cost with respect to an architecture for which all repeaters are the same. Secondly, the use of continuous-variable GKP code on the lower level generates additional analog information which enhances the error-correcting capabilities of the second-level code such that long-distance communication becomes possible with encodings consisting of only four or seven optical modes.

scholarly journals Properties of spoof plasmon in thin structures

2018 ◽  
Vol 474 (2220) ◽  
pp. 20180205
Author(s):  
Soumitra Roy Joy ◽  
Hao Yu ◽  
Pinaki Mazumder
Keyword(s):  
Three Dimensional ◽  
Wide Band ◽  
Blue Shift ◽  
Plasmon Mode ◽  
Dimensional Structure ◽  
Thin Structures ◽  
Enhanced Sensitivity ◽  
Optical Modes ◽  
Specific Frequency ◽  
Modulation Rate

Spoof surface plasmon polariton (SSPP) is an exotic electromagnetic state that confines light at a subwavelength scale at a design-specific frequency. It has been known for a while that spoof plasmon mode can exist in planar, thin structures with dispersion properties similar to that of its wide three-dimensional structure counterpart. We, however, have shown that spoof plasmons in thin structures possess some unique properties that remain unexplored. Our analysis reveals that the field interior to SSPP waveguide can achieve an exceptional hyperbolic spatial dependence, which can explain why spoof plasma resonance incurs red-shift with the reduction of the waveguide thickness, whereas common wisdom suggests frequency blue-shift of a resonant structure with its size reduction. In addition, we show that strong confinement can be achieved over a wide band in thin spoof plasmon structure, ranging from the spoof plasma frequency up to a lower frequency considerably away from the resonant point. The nature of lateral confinement in thin SSPP structures may enable interesting applications involving fast modulation rate due to enhanced sensitivity of optical modes without compromising modal confinement.

Splitting of resonant optical modes in Fabry-Perot microcavities

2003 ◽  
Vol 37 (7) ◽  
pp. 832-837 ◽  
Author(s):  
V. G. Golubev ◽  
A. A. Dukin ◽  
A. V. Medvedev ◽  
A. B. Pevtsov ◽  
A. V. Sel’kin ◽  
...  
Keyword(s):  
Fabry Perot ◽  
Optical Modes

Long-wavelength lattice vibrations of Ag3In5Se9 and Ag3In5Te9 single crystals — An inversion of LO- and TO-mode frequencies

2016 ◽  
Vol 30 (18) ◽  
pp. 1650229 ◽  
Author(s):  
Nizami Mamed Gasanly
Keyword(s):  
Refractive Index ◽  
Single Crystals ◽  
Longitudinal Optical ◽  
Absorption Index ◽  
Energy Losses ◽  
Optical Parameters ◽  
Lattice Vibrations ◽  
Frequency Range ◽  
Long Wavelength ◽  
Optical Modes

Infrared (IR) reflectivities are registered in the frequency range of 50–2000 cm[Formula: see text] for Ag3In5Se9 and Ag3In5Te9 single crystals grown by Bridgman method. Three infrared-active modes are detected in spectra. The optical parameters, real and imaginary parts of the dielectric function, the function of energy losses, refractive index, absorption index and absorption coefficient were calculated from reflectivity experiments. The frequencies of transverse and longitudinal optical modes (TO and LO modes) and oscillator strength were also determined. The bands detected in infrared spectra were tentatively attributed to various vibration types (valence and valence-deformation). The inversion of LO- and TO-mode frequencies of the sandwiched pair was observed for studied crystals.

Sign in / Sign up

Export Citation Format

Share Document