Coherent structures in the mixing zone of a subsonic hot free jet

Author(s):  
Claude Dahan ◽  
Georges Elias ◽  
Jean Maulard ◽  
Mariano Perulli
1978 ◽  
Vol 59 (3) ◽  
pp. 313-333 ◽  
Author(s):  
C. Dahan ◽  
G. Elias ◽  
J. Maulard ◽  
M. Perulli

Author(s):  
Benedikt Krohn ◽  
Sunming Qin ◽  
Victor Petrov ◽  
Annalisa Manera

Turbulent free jets attracted the focus of many scientists within the past century regarding the understanding of mass- and momentum transport in the turbulent shear field, especially in the near-field and the self-similar region. Recent investigations attempt to understand the intermediate fields, called the mixing transition or ‘the route to self-similarity’. An apparent gap is recognized in light of this mixing transition, with two main conjectures being put forth. Firstly the flow will always asymptotically reach a fully self-similar state if boundary conditions permit. The second proposes partial and local self-similarity within the mixing transition. We address the later with an experimental investigation of the intermediate field turbulence dynamics in a non-confined free jet with a nozzle diameter of 12.7 mm and an outer scale Reynolds number of 15,000. High speed Particle Image Velocimetry (PIV) is used to record the velocity fields with a final spatial resolution of 194 × 194 μm2. The analysis focuses on higher order moments and two-point correlations of velocity variances in space and time. We observed local self-similarity in the measured correlation fields. Coherent structures are present within the near-field where the turbulent energy spectrum cascades along a dissipative slope. Towards the transition region, the spectrum smoothly transforms to a viscous cascade, as it is commonly observed in the self-similar region.


2018 ◽  
Vol 40 ◽  
pp. 05037
Author(s):  
Pascale M. Biron ◽  
Thomas Buffin-Bélanger ◽  
Nancy Martel

River confluences are characterized by a complex mixing zone with three-dimensional turbulent structures, which can be affected by the presence of an ice cover during the winter. The objective of this study is to characterize the flow structure in the mixing zone at a medium-size (~ 40 m) river confluence with and without an ice cover. Detailed velocity profiles were collected under the ice along the mixing plane with an Acoustic Doppler Velocimeter. For the ice-free conditions, drone imagery was used to characterize the mixing layer structures for various flow stages. Results indicate that during the ice-free conditions, very large Kelvin-Helmholtz (KH) coherent structures are visible due to turbidity differences, and occupy up to 50% of the width of the parent channel. During winter, the ice cover affects velocity profiles by moving the highest velocities towards the center of the profiles. Large turbulent structures are visible in both the streamwise and lateral velocity components. The strong correlation between these velocity components indicates that KH vortices are the dominating coherent structures in the mixing zone. A spatio-temporal conceptual model is presented to illustrate the main differences on the three-dimensional flow structure at the river confluence with and without the ice cover.


Author(s):  
M. A. Listvan ◽  
R. P. Andres

Knowledge of the function and structure of small metal clusters is one goal of research in catalysis. One important experimental parameter is cluster size. Ideally, one would like to produce metal clusters of regulated size in order to characterize size-dependent cluster properties.A source has been developed which is capable of producing microscopic metal clusters of controllable size (in the range 5-500 atoms) This source, the Multiple Expansion Cluster Source, with a Free Jet Deceleration Filter (MECS/FJDF) operates as follows. The bulk metal is heated in an oven to give controlled concentrations of monomer and dimer which were expanded sonically. These metal species were quenched and condensed in He and filtered to produce areosol particles of a controlled size as verified by mass spectrometer measurements. The clusters were caught on pre-mounted, clean carbon films. The grids were then transferred in air for microscopic examination. MECS/FJDF was used to produce two different sizes of silver clusters for this study: nominally Ag6 and Ag50.


2014 ◽  
Vol 8 (5) ◽  
pp. 820
Author(s):  
Saad Ahmed ◽  
Bharath Raghavan
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document