An investigation on antiseismic base-isolation and control

2005 ◽  
pp. 232-247
Author(s):  
Argiris Gerasimos Soldatos
Keyword(s):  
Base Isolation ◽  
And Control

Isolation Application of Controlled and Uncontrolled Magnetorheological Dampers for Random Base Excitaion

2005 ◽  
Author(s):  
A. Narimani ◽  
M. F. Golnaraghi
Keyword(s):  
Base Isolation ◽  
Mr Damper ◽  
Optimization Method ◽  
Experimental Results ◽  
Base Excitation ◽  
Modeling And Control ◽  
Isolation Systems ◽  
Active Damper ◽  
Suspension Model ◽  
And Control

This paper presents experimental investigation of modeling and control of magnetorhological damper for transient base excitation inputs. Force characteristics of a commercially available MR damper (RD-1005-3) for shock and other transient base excitation are analytically obtained and validated using a scaled suspension model. The proposed model characterizes damper behavior more accurately and efficiently for analytical applications. The time and frequency responses of the developed model are compared with the experimental results and show good agreement. Finally, using the RMS optimization method the performance of the system for different types of controllers is compared with the optimal values of linear isolator system. Experimental results show that the performance of base isolation systems for transient and shock inputs significantly improves by utilizing a controlled semi-active damper over uncontrolled MR damper or an optimally designed passive isolator.

scholarly journals Improving the resistance of structures to earthquakes

2001 ◽  
Vol 34 (1) ◽  
pp. 1-39 ◽  
Author(s):  
R. Park
Keyword(s):  
New Zealand ◽  
Base Isolation ◽  
Precast Concrete ◽  
Mechanical Energy ◽  
Performance Criteria ◽  
Earthquake Resistance ◽  
Kobe Earthquake ◽  
Bridge Structures ◽  
Seismic Forces ◽  
And Control

The past occurrence of earthquakes in New Zealand and the likelihood of a major earthquake in Christchurch are considered. The causes of damage by earthquakes are discussed and typical possible types of damage to building and bridge structures are described with reference to the 1995 Kobe earthquake. The design of building and bridge structures for earthquake resistance by the ductile design approach is covered, including performance criteria, structural configuration, design seismic forces, mechanisms of post-elastic deformation, capacity design, detailing of reinforcement for ductility and control of deflections. Design using base isolation and mechanical energy dissipating devices is also outlined. The extensive use of precast concrete in buildings in New Zealand is described. Finally the seismic assessment and upgrading of old structures and the earthquake resistance of lifelines of communities (transportation, utilities and communications) are briefly considered.

Dynamic Response Analysis of MSCSS Constructed with Rubber Vibration Isolator

2014 ◽  
Vol 574 ◽  
pp. 179-183
Author(s):  
Tao Li
Keyword(s):  
Base Isolation ◽  
Dynamic Responses ◽  
Response Analysis ◽  
Vibration Isolator ◽  
Seismic Responses ◽  
Earthquake Excitation ◽  
Isolation Technique ◽  
Probability Density Evolution Method ◽  
And Control ◽  
Probability Density Evolution

The seismic responses of the mega-sub controlled structural system (MSCSS) can be reduced effectively based on the combination of the construction and control theory. One of the main construction features of the MSCSS is the connection between the additional column and the mega beam. The rubber vibration isolator is proposed as a new connection mode between the above two components according to the base isolation technique. The dynamic responses of the MSCSS subjected to the earthquake excitation are investigated by employing the probability density evolution method. The analysis results are compared with the seismic responses of the MSCSS constructed with other connection modes. The results show that the seismic responses of the MSCSS constructed with rubber vibration isolator can be reduced effectively, but the effect is not better than the other connection modes.

Control of Metal Alloy Oxidation with Electric Fields

1973 ◽  
Vol 31 ◽  
pp. 164-165
Author(s):  
R. R. Dils ◽  
P. S. Follansbee
Keyword(s):  
Electric Fields ◽  
Oxidation Process ◽  
Base Alloy ◽  
Oxide Surface ◽  
Platinum Electrodes ◽  
Insulating Layer ◽  
Iron Base Alloy ◽  
Alloy Oxidation ◽  
Aluminum Oxide Layer ◽  
And Control

Electric fields have been applied across oxides growing on a high temperature alloy and control of the oxidation of the material has been demonstrated. At present, three-fold increases in the oxidation rate have been measured in accelerating fields and the oxidation process has been completely stopped in a retarding field.The experiments have been conducted with an iron-base alloy, Pe 25Cr 5A1 0.1Y, although, in principle, any alloy capable of forming an adherent aluminum oxide layer during oxidation can be used. A specimen is polished and oxidized to produce a thin, uniform insulating layer on one surface. Three platinum electrodes are sputtered on the oxide surface and the specimen is reoxidized.

Evidence for a Blood Ganglion Barrier in the Superior Cervical Ganglion of the Rat

1982 ◽  
Vol 40 ◽  
pp. 204-204
Author(s):  
D. M. DePace
Keyword(s):  
Blood Vessels ◽  
Superior Cervical Ganglion ◽  
Peripheral Nerves ◽  
Time Schedule ◽  
Transmission Electron ◽  
Cervical Ganglion ◽  
The Central Nervous System ◽  
Cervical Ganglia ◽  
Capillary Circulation ◽  
And Control

The majority of blood vessels in the superior cervical ganglion possess a continuous endothelium with tight junctions. These same features have been associated with the blood brain barrier of the central nervous system and peripheral nerves. These vessels may perform a barrier function between the capillary circulation and the superior cervical ganglion. The permeability of the blood vessels in the superior cervical ganglion of the rat was tested by intravenous injection of horseradish peroxidase (HRP). Three experimental groups of four animals each were given intravenous HRP (Sigma Type II) in a dosage of.08 to.15 mg/gm body weight in.5 ml of.85% saline. The animals were sacrificed at five, ten or 15 minutes following administration of the tracer. Superior cervical ganglia were quickly removed and fixed by immersion in 2.5% glutaraldehyde in Sorenson's.1M phosphate buffer, pH 7.4. Three control animals received,5ml of saline without HRP. These were sacrificed on the same time schedule. Tissues from experimental and control animals were reacted for peroxidase activity and then processed for routine transmission electron microscopy.

Effects of renovascular hypertension on rat adrenal zona glomerulosa

1978 ◽  
Vol 36 (2) ◽  
pp. 582-583
Author(s):  
G. Mazzocchi ◽  
P. Rebuffat ◽  
C. Robba ◽  
P. Vassanelli ◽  
G. G. Nussdorfer
Keyword(s):  
Renovascular Hypertension ◽  
Left Kidney ◽  
Renin Angiotensin System ◽  
Plasma Renin ◽  
Zona Glomerulosa ◽  
Ultrastructural Changes ◽  
Albino Rats ◽  
Left Renal Artery ◽  
Angiotensin System ◽  
And Control

It is well known that the rat adrenal zona glomerulosa steroidogenic activity is controlled by the renin-angiotensin system. The ultrastructural changes in the rat zona glomerulosa cells induced by renovascular hypertension were described previously, but as far as we are aware no correlated biochemical and morphometric investigations were performed.Twenty adult male albino rats were divided into 2 experimental groups. One group was subjected to restriction of blood flow to the left kidney by the application of a silver clip about the left renal artery. The other group was sham-operated and served as a control. Renovascular hypertension developed in about 10 days: sistolic blood pressure averaged 165 ± 6. 4 mmHg, whereas it was about 110 ± 3. 8 mmHg in the control animals. The hypertensive and control rats were sacrificed 20 days after the operation. The blood was collected and plasma renin activity was determined by radioimmunological methods. The aldosterone concentration was radioimmunologically assayed both in the plasma and in the homogenate of the left capsular adrenal gland.

X-Ray Replication of Submicrometer Linewidth Patterns

1977 ◽  
Vol 35 ◽  
pp. 136-137
Author(s):  
Henry I. Smith ◽  
D.C. Flanders
Keyword(s):  
Electron Beam Lithography ◽  
Cross Sectional ◽  
X Ray ◽  
Electron Backscattering ◽  
Spatial Frequencies ◽  
Cross Sectional Profile ◽  
Carbon Foils ◽  
Sectional Profile ◽  
And Control ◽  
Soft Radiation

Scanning electron beam lithography has been used for a number of years to write submicrometer linewidth patterns in radiation sensitive films (resist films) on substrates. On semi-infinite substrates, electron backscattering severely limits the exposure latitude and control of cross-sectional profile for patterns having fundamental spatial frequencies below about 4000 Å(l),Recently, STEM'S have been used to write patterns with linewidths below 100 Å. To avoid the detrimental effects of electron backscattering however, the substrates had to be carbon foils about 100 Å thick (2,3). X-ray lithography using the very soft radiation in the range 10 - 50 Å avoids the problem of backscattering and thus permits one to replicate on semi-infinite substrates patterns with linewidths of the order of 1000 Å and less, and in addition provides means for controlling cross-sectional profiles. X-radiation in the range 4-10 Å on the other hand is appropriate for replicating patterns in the linewidth range above about 3000 Å, and thus is most appropriate for microelectronic applications (4 - 6).

Ultrastructural changes in sciatic nerve tissue: Effects of passive maternal smoking

1983 ◽  
Vol 41 ◽  
pp. 650-651
Author(s):  
Amankwah K.S. ◽  
A.D. Weberg ◽  
R.C. Kaufmann
Keyword(s):  
Sciatic Nerve ◽  
Maternal Smoking ◽  
Ultrastructural Level ◽  
Uranyl Acetate ◽  
Nerve Tissue ◽  
Ultrastructural Changes ◽  
Cacodylate Buffer ◽  
And Control ◽  
Spontaneous Delivery

Previous research has revealed that passive (involuntary inhalation) tobacco smoking during gestation can have adverse effects upon the developing fetus. These prior investigations did not concentrate on changes in fetal morphology. This study was undertaken to delineate fetal neural abnormalities at the ultrastructural level in mice pups exposed in utero to passive maternal smoking.Pregnant study animals, housed in a special chamber, were subjected to cigarette smoke daily from conception until delivery. Blood tests for determination of carbon monoxide levels were run at 15-18 days gestation. Sciatic nerve tissue from experimental and control animals were obtained following spontaneous delivery and fixed in 2.5% gluteraldehyde in 0.1M cacodylate buffer pH 7.3. The samples were post-fixed in osmium ferrocyanide (1:1 mixture of 1.5% aqueous OSO4 and 2.5% K4 Fe(CN)6). Following dehydration, the tissues were infiltrated with and embedded in Spurr. Sections were stained with uranyl acetate and lead citrate.

A Superconducting Microscope

1971 ◽  
Vol 29 ◽  
pp. 10-11 ◽  
Author(s):  
R. E. Worsham ◽  
J. E. Mann ◽  
E. G. Richardson
Keyword(s):  
Liquid Helium ◽  
Focal Length ◽  
Vacuum System ◽  
Objective Lens ◽  
Electrical Instability ◽  
Radiation Shields ◽  
And Control ◽  
Thermal Oscillations ◽  
Flux Pump

This superconducting microscope, Figure 1, was first operated in May, 1970. The column, which started life as a Siemens Elmiskop I, was modified by removing the objective and intermediate lenses, the specimen chamber, and the complete vacuum system. The large cryostat contains the objective lens and stage. They are attached to the bottom of the 7-liter helium vessel and are surrounded by two vapor-cooled radiation shields.In the initial operational period 5-mm and 2-mm focal length objective lens pole pieces were used giving magnification up to 45000X. Without a stigmator and precision ground pole pieces, a resolution of about 50-100Å was achieved. The boil-off rate of the liquid helium was reduced to 0.2-0.3ℓ/hour after elimination of thermal oscillations in the cryostat. The calculated boil-off was 0.2ℓ/hour. No effect caused by mechanical or electrical instability was found. Both 4.2°K and 1.7-1.9°K operation were routine. Flux pump excitation and control of the lens were quite smooth, simple, and, apparently highly stable. Alignment of the objective lens proved quite awkward, however, with the long-thin epoxy glass posts used for supporting the lens.

Sign in / Sign up

Export Citation Format

Share Document