An Electrical Analogue in Lighting Technology

1979 ◽  
Vol 8 (1) ◽  
pp. 9-11
Author(s):  
V. K. Maitreya
2018 ◽  
Vol 6 (3) ◽  
pp. 20-28
Author(s):  
Faisal Al Tabatabaie ◽  
Dhabia Sabeeh Al Waily

The use of cutoffs underneath the hydraulic structures is considered a safe solution to ensure the stability of hydraulic structure against uplift pressure and piping phenomenon in addition to the sliding and overturning forces of the water. These cutoffs are used at critical sections underneath the floor of hydraulic structure to substitute with their depths the horizontal lengths of the creep line of the hydraulic structure base. In this paper, the experimental method- by using electrical analogue model- was carried out to plot the flow net and study the efficiency of the front and rear faces of the cutoffs for dissipating the potential energy of the percolating water underneath the floor of hydraulic structure. An electrical analogue model which was used in this study consists of twenty five models with different depths of upstream and downstream cutoffs. After plotting the flow net for all models, it is concluded that the efficiency of the inner sides are less than that of the outer sides which were investigated before in this topic of this work that both faces reduction values in the uplift pressure are considered the same, where the efficiency of the outer face of upstream cutoff is (70.35) % and for the inner face is (29.64)%, while for the downstream cutoff the efficiency for the outer face is (76.21)% and for the inner face is (23.79)% .


Author(s):  
Kai Zhang ◽  
Ningning Zhu ◽  
Mingming Zhang ◽  
Lei Wang ◽  
Jun Xing

Recently, the light-emitting diode (LED) has been considered as an energy-saving and environment-friendly lighting technology,which is ten times more energy efficient than conventional incandescent lights. As an emerging photoelectric material,...


2015 ◽  
Vol 5 (3) ◽  
pp. 4-11
Author(s):  
Adam Rogers

The city of Los Angeles is converting its streetlights from orange-gold sodium vapor technology to cold, white light-emitting diodes. It’s a transition that will change the color of the city at night, in a place with a long history of experimentation with artificial lighting technology. That means not only that the city will appear different, but it will no longer correspond to memories of its coloration, or to its depictions in famous films.


1964 ◽  
Vol 15 (1) ◽  
pp. 83-96 ◽  
Author(s):  
K. R. Rushton

SummaryThe elastic stress concentration factors for the torsion of solid and hollow shouldered shafts have been determined by means of a pure resistance electrical analogue. Fillet radii ranged from 0.05 to 1.0 times the diameter of the smaller shaft, and the shoulder diameter increased from 1.0 to 8.10 times the diameter of the smaller shaft. A comparison is made with the results of other techniques. A study has also been made of the formation of a plastic region in the neighbourhood of the fillet.


Sign in / Sign up

Export Citation Format

Share Document