The ionic nature of metallurgical slags. Simple oxide systems

JOM ◽  
1949 ◽  
Vol 1 (2) ◽  
pp. 191-197 ◽  
Author(s):  
John Chipman ◽  
Lo-Ching Chang
Keyword(s):  
Oxide Systems ◽  
Simple Oxide ◽  
Metallurgical Slags ◽  
Ionic Nature

Quasiperiodic interfaces: HREM observations of grain and phase boundaries

1990 ◽  
Vol 48 (4) ◽  
pp. 332-333
Author(s):  
K. L. Merkle
Keyword(s):  
Atomic Structure ◽  
Direct Determination ◽  
Lattice Parameter ◽  
Atomic Scale ◽  
Misfit Dislocations ◽  
Oxide Systems ◽  
Atomic Structures ◽  
Periodic Arrays ◽  
Parameter Ratio ◽  
Metal Metal

The atomic structures of internal interfaces have recently received considerable attention, not only because of their importance in determining many materials properties, but also because the atomic structure of many interfaces has become accessible to direct atomic-scale observation by modem HREM instruments. In this communication, several interface structures are examined by HREM in terms of their structural periodicities along the interface.It is well known that heterophase boundaries are generally formed by two low-index planes. Often, as is the case in many fcc metal/metal and metal/metal-oxide systems, low energy boundaries form in the cube-on-cube orientation on (111). Since the lattice parameter ratio between the two materials generally is not a rational number, such boundaries are incommensurate. Therefore, even though periodic arrays of misfit dislocations have been observed by TEM techniques for numerous heterophase systems, such interfaces are quasiperiodic on an atomic scale. Interfaces with misfit dislocations are semicoherent, where atomically well-matched regions alternate with regions of misfit. When the misfit is large, misfit localization is often difficult to detect, and direct determination of the atomic structure of the interface from HREM alone, may not be possible.

RESEARCHES ABOUT THE CHARACTERIZATION OF METALLURGICAL SLAGS FOR LANDFILLED WASTES MINIMIZATION

2015 ◽  
Vol 14 (9) ◽  
pp. 2115-2126 ◽  
Author(s):  
Dana-Adriana Ilutiu-Varvara ◽  
Liviu Brandusan ◽  
George Arghir ◽  
Elena Maria Pica
Keyword(s):  
Metallurgical Slags

Technological Solution for the Treatment of Wastewater Resulting from Autochthonous Aquacultures in Order to Protect the Marine Water Quality

2018 ◽  
Vol 68 (12) ◽  
pp. 2752-2755
Author(s):  
Carmen Tociu ◽  
Tania Zaharia ◽  
Elena Diacu ◽  
Cristina Maria ◽  
Florica Marinescu ◽  
...  
Keyword(s):  
Water Quality ◽  
Wastewater Treatment ◽  
Black Sea ◽  
Pilot Scale ◽  
Integrated System ◽  
The Black Sea ◽  
Technological Solution ◽  
Aluminium Sulphate ◽  
Metallurgical Slags ◽  
Treatment Step

This paper depicts the research conducted at a micro-pilot scale on autochthonous cultures in order to develop adequate technological solutions for the treatment of wastewater resulting from shrimp cultures (Palaemonidae) that would ensure the protection of the Black Sea ecosystem and constitute an applicable tool for the development of aquaculture in Romania. The proposed objectives were attained by adopting an integrated system of marine cultures shrimps-mussels-macrophyte algae, followed by a conventional chemical treatment step using aluminium sulphate recovered from metallurgical slags. This system together with wastewater treatment ensures an optimum development of species and a minimum load of pollutants in the aquatic environment.

Rare earth—platinum group mixed metal oxide systems

1994 ◽  
Vol 210 (1-2) ◽  
pp. 177-184 ◽  
Author(s):  
K.M. Cruickshank ◽  
F.P. Glasser
Keyword(s):  
Rare Earth ◽  
Metal Oxide ◽  
Mixed Metal Oxide ◽  
Oxide Systems ◽  
Mixed Metal ◽  
Platinum Group

scholarly journals Use of Treated Non-Ferrous Metallurgical Slags as Supplementary Cementitious Materials in Cementitious Mixtures

2021 ◽  
Vol 11 (9) ◽  
pp. 4028
Author(s):  
Asghar Gholizadeh Vayghan ◽  
Liesbeth Horckmans ◽  
Ruben Snellings ◽  
Arne Peys ◽  
Priscilla Teck ◽  
...  
Keyword(s):  
Mechanical Performance ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Partial Replacement ◽  
Strength Development ◽  
Supplementary Cementitious Material ◽  
Performance Requirements ◽  
Metallurgical Slags ◽  
Leaching Behaviour ◽  
Kinetics Of

This research investigated the possibility of using metallurgical slags from the copper and lead industries as partial replacement for cement. The studied slags were fayalitic, having a mainly ferro-silicate composition with minor contents of Al2O3 and CaO. The slags were treated at 1200–1300 °C (to reduce the heavy metal content) and then granulated in water to promote the formation of reactive phases. A full hydration study was carried out to assess the kinetics of reactions, the phases formed during hydration, the reactivity of the slags and their strength activity as supplementary cementitious material (SCM). The batch-leaching behaviour of cementitious mixtures incorporating treated slags was also investigated. The results showed that all three slags have satisfactory leaching behaviour and similar performance in terms of reactivity and contribution to the strength development. All slags were found to have mediocre reactivity and contribution to strength, especially at early ages. Nonetheless, they passed the minimum mechanical performance requirements and were found to qualify for use in cement.

scholarly journals Role of Mixed Oxides in Hydrogen Production through the Dry Reforming of Methane over Nickel Catalysts Supported on Modified γ-Al2O3

Processes ◽  
2021 ◽  
Vol 9 (1) ◽  
pp. 157
Author(s):  
Ahmed Sadeq Al-Fatesh ◽  
Mayankkumar Lakshmanbhai Chaudhary ◽  
Anis Hamza Fakeeha ◽  
Ahmed Aidid Ibrahim ◽  
Fahad Al-Mubaddel ◽  
...  
Keyword(s):  
Mixed Oxides ◽  
Nickel Catalysts ◽  
H2 Production ◽  
Dry Reforming ◽  
Dry Reforming Of Methane ◽  
Incipient Wetness Impregnation ◽  
Thermally Stable ◽  
Oxide Systems ◽  
Catalyst Systems ◽  
H2 Yield

H2 production through dry reforming of methane (DRM) is a hot topic amidst growing environmental and atom-economy concerns. Loading Ni-based reducible mixed oxide systems onto a thermally stable support is a reliable approach for obtaining catalysts of good dispersion and high stability. Herein, NiO was dispersed over MOx-modified-γ-Al2O3 (M = Ti, Mo, Si, or W; x = 2 or 3) through incipient wetness impregnation followed by calcination. The obtained catalyst systems were characterized by infrared, ultraviolet–visible, and X-ray photoelectron spectroscopies, and H2 temperature-programmed reduction. The mentioned synthetic procedure afforded the proper nucleation of different NiO-containing mixed oxides and/or interacting-NiO species. With different modifiers, the interaction of NiO with the γ-Al2O3 support was found to change, the Ni2+ environment was reformed exclusively, and the tendency of NiO species to undergo reduction was modified greatly. Catalyst systems 5Ni3MAl (M = Si, W) comprised a variety of species, whereby NiO interacted with the modifier and the support (e.g., NiSiO3, NiAl2O4, and NiWO3). These two catalyst systems displayed equal efficiency, >70% H2 yield at 800 °C, and were thermally stable for up to 420 min on stream. 5Ni3SiAl catalyst regained nearly all its activity during regeneration for up to two cycles.

Electrical Conductivity and Structural Studies on the Binary System BiI3-Ag2SO4

2012 ◽  
Vol 584 ◽  
pp. 521-525
Author(s):  
S. Austin Suthanthiraraj ◽  
Ayesha Saleem
Keyword(s):  
Electrical Conductivity ◽  
Binary System ◽  
Ionic Conduction ◽  
Structural Characteristics ◽  
Complex Impedance ◽  
Present System ◽  
Rapid Melt Quenching ◽  
Ionic Nature ◽  
Electrochemical Devices ◽  
Silver Sulphate

A new solid-state pseudo binary system BiI3_-Ag2SO4 involving bismuth triiodide (BiI3) and a silver oxysalt namely silver sulphate (Ag2SO4) has been prepared using rapid melt-quenching technique. AC conductivity studies have been carried out on the nine different samples of the (BiI3)x –- (Ag2SO4)(1-x) system with compositions corresponding to x=0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8 and 0.9 mole fraction at temperatures ranging from room temperature (298 K) to 433K. The bulk resistance values estimated using complex impedance plots indicated that electrical conductivity of the synthesized solid specimens would vary from 2.9 x10-2 to 3.4 x10-6Scm-1 thus suggesting the present system to be ionic in nature. The extent of ionic conduction due to Ag + cation has also been analyzed using Wagner’s dc polarization technique whereas detailed structural characteristics of the various compositions derived from Fourier transform infrared (FTIR) spectroscopy and features of surface morphology of these samples obtained using scanning electron microscopy (SEM) have further supported the ionic nature of the chosen system and suggested possible application as a solid electrolyte in electrochemical devices.

Sign in / Sign up

Export Citation Format

Share Document