Enhancement of power conversion efficiency of photovoltaic cell fabricated with 1,2,4,5-tetra(6-hexyl-2-vinyl-dithieno [3,2-b;2′,3′-d]thiophene)-benzene and methanofullerene [6,6]-phenyl C61-butyric acid methyl ester

2009 ◽  
Vol 17 (8) ◽  
pp. 549-552 ◽  
Author(s):  
Kyung Hwan Kim ◽  
Dae Cheol Kim ◽  
Min Ju Cho ◽  
Dong Hoon Choi ◽  
Nam Su Kang ◽  
...  
Keyword(s):  
Methyl Ester ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Butyric Acid ◽  
Power Conversion ◽  
Acid Methyl Ester ◽  
Photovoltaic Cell ◽  
Acid Methyl ◽  
Butyric Acid Methyl Ester

Effects of the pyromellitic dianhydride cathode interfacial layer on characteristics of organic solar cells based on poly(3-hexylthiophene-2,5-diyl) and [6,6]-phenyl C61 butyric acid methyl ester

2010 ◽  
Vol 25 (5) ◽  
pp. 866-870 ◽  
Author(s):  
Eunkyoung Nam ◽  
Mi Ran Moon ◽  
Jungwoo Kim ◽  
Donggeun Jung ◽  
Hyoungsub Kim ◽  
...  
Keyword(s):  
Solar Cells ◽  
Methyl Ester ◽  
Butyric Acid ◽  
Organic Solar Cells ◽  
Interfacial Layer ◽  
Power Conversion ◽  
Acid Methyl Ester ◽  
Pyromellitic Dianhydride ◽  
Acid Methyl ◽  
Butyric Acid Methyl Ester

This study examined the performance of poly(3-hexylthiophene-2,5-diyl)(P3HT)- and [6,6]-phenyl C61 butyric acid methyl ester (PCBM)-based organic solar cells (OSCs) with a pyromellitic dianhydride (PMDA) cathode interfacial layer between the active layer and cathode. The effect of inserting the cathode interfacial layer with different thicknesses was investigated. For the OSC samples with a 0.5 nm thick PMDA layer, the power conversion efficiency (PCE) was approximately 2.77% under 100 mW/cm2 (AM1.5) simulated illumination. It was suggested that the PMDA cathode interfacial layer acts as an exciton blocking layer, leading to an enhancement of the OSC performance.

Optical Absorption Enhancement in Polymer BHJ thin Film Using Ag Nanostructures: A Simulation Study

2020 ◽  
Vol 16 (4) ◽  
pp. 556-567
Author(s):  
Asma Khalil ◽  
Zubair Ahmad ◽  
Farid Touati ◽  
Mohamed Masmoudi
Keyword(s):  
Absorption Spectrum ◽  
Solar Cell ◽  
Methyl Ester ◽  
Butyric Acid ◽  
Organic Solar Cell ◽  
Short Circuit ◽  
Acid Methyl Ester ◽  
Short Circuit Current ◽  
Acid Methyl ◽  
Butyric Acid Methyl Ester

Background: The photo-absorption and light trapping through the different layers of the organic solar cell structures are a growing concern now-a-days as it affects dramatically the overall efficiency of the cells. In fact, selecting the right material combination is a key factor in increasing the efficiency in the layers. In addition to good absorption properties, insertion of nanostructures has been proved in recent researches to affect significantly the light trapping inside the organic solar cell. All these factors are determined to expand the absorption spectrum and tailor it to a wider spectrum. Objective: The purpose of this investigation is to explore the consequence of the incorporation of the Ag nanostructures, with different sizes and structures, on the photo absorption of the organic BHJ thin films. Methods: Through a three-dimensional Maxwell solver software, Lumerical FDTD, a simulation and comparison of the optical absorption of the three famous organic materials blends poly(3- hexylthiophene): phenyl C71 butyric acid methyl ester (P3HT:PCBM), poly[N-9″-heptadecanyl-2,7- carbazole-alt-5,5-(4′,7′-di-2-thienyl-2′,1′,3′-benzothiadiazole)]: phenyl C71 butyric acid methyl ester (PCDTBT:PCBM) and poly[2,6-(4,4-bis-(2-ethylhexyl)-4H-cyclopenta[2,1-b;3,4-b′]dithiophene)-alt- 4,7-(2,1,3-benzothiadiazole)]: phenyl C71 butyric acid methyl ester (PCDPDTBT:PCBM) has been conducted. Furthermore, FDTD simulation study of the incorporation of nanoparticles structures with different sizes, in different locations and concentrations through a bulk heterojunction organic solar cell structure has also been performed. Results: It has been demonstrated that embedding nanostructures in different locations of the cell, specifically in the active layer and the hole transporting layer had a considerable effect of widening the absorption spectrum and increasing the short circuit current. The effect of incorporation the nanostructures in the active layer has been proved to be greater than in the HTL. Furthermore, the comparison results showed that, PCDTBT:PCBM is no more advantageous over P3HT:PCBM and PCPDTBT:PCBM, and P3HT:PCBM took the lead and showed better performance in terms of absorption spectrum and short circuit current value. Conclusion: This work revealed the significant effect of size, location and concentration of the Ag nanostructures while incorporated in the organic solar cell. In fact, embedding nanostructures in the solar cell widen the absorption spectrum and increases the short circuit current, this result has been proven to be significant only when the nanostructures are inserted in the active layer following specific dimensions and structures.

Sterically controlled azomethine ylide cycloaddition polymerization of phenyl-C61-butyric acid methyl ester

2016 ◽  
Vol 52 (36) ◽  
pp. 6107-6110 ◽  
Author(s):  
Meera Stephen ◽  
Hasina H. Ramanitra ◽  
Hugo Santos Silva ◽  
Simon Dowland ◽  
Didier Bégué ◽  
...  
Keyword(s):  
Thin Films ◽  
Methyl Ester ◽  
Butyric Acid ◽  
Acid Methyl Ester ◽  
Azomethine Ylide ◽  
Acid Methyl ◽  
Butyric Acid Methyl Ester ◽  
Solution Processable

PCBM is polymerised using the SACAP route to give solution processable thin films and raised LUMOs.

Sign in / Sign up

Export Citation Format

Share Document