Effects of severe plastic deformation and heat treatment on transformation behavior of explosively welded duplex TiNi−TiNi

2007 ◽  
Vol 4 (4) ◽  
pp. 107-112 ◽  
Author(s):  
Li Juntao ◽  
Zheng Yanjun ◽  
Cui Lishan
Keyword(s):  
Heat Treatment ◽  
Plastic Deformation ◽  
Severe Plastic Deformation ◽  
Transformation Behavior ◽  
Deformation And Heat Treatment

scholarly journals The Effect of Severe Plastic Deformation and Heat Treatment on CuCrZr Alloys

2017 ◽  
Vol 131 (5) ◽  
pp. 1336-1340 ◽  
Author(s):  
A. Kováčová ◽  
T. Kvačkaj ◽  
R. Kočiško ◽  
L. Dragošek ◽  
L. Lityńska-Dobrzyńska
Keyword(s):  
Heat Treatment ◽  
Plastic Deformation ◽  
Severe Plastic Deformation ◽  
Deformation And Heat Treatment

Magnetic Properties of Nanocrystalline (Nd,R)-(Fe,Co)-B (R = Pr, Ho) Alloys after Melt Spinning, Severe Plastic Deformation and Heat Treatment

2020 ◽  
Vol 312 ◽  
pp. 235-243
Author(s):  
Lev Aleksandrovich Ivanov ◽  
Tatiana P. Kaminskaya ◽  
Irina Semenovna Tereshina ◽  
Vladislav Davydov ◽  
Vladimir V. Popov ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Plastic Deformation ◽  
Severe Plastic Deformation ◽  
Melt Spinning ◽  
Magnetic Hysteresis ◽  
Hysteresis Loops ◽  
Nanocrystalline State ◽  
Force Microscopy ◽  
Atomic Force ◽  
Deformation And Heat Treatment

Magnetic force microscopy (MFM) and magnetometry, scanning electron microscopy (SEM) and atomic force microscopy (AFM) are used to study the magnetic and structural properties of the (Nd,Pr)-Fe–B and (Nd,Ho)-(Fe,Co)-B alloys. The alloys are synthesized using an arc or induction furnaces. The nanocrystalline state of the (Nd,Ho)-(Fe,Co)-B alloys is reached by two techniques, namely, melt spinning (MS) and severe plastic deformation (SPD). Hydrogenation and multistage treatment of (Nd,Ho)-(Fe,Co)-B alloys, which includes severe plastic deformation of melt-quenched ribbons and subsequent heat treatment, is also used. The surface morphology and domain structure of samples are studied. These pictures are used to interpret the observed magnetic hysteresis loops of the samples. It was found that multistage treatment allows one to obtain samples with higher values of coercivity due to the formation of a special microstructure with oval grain (the aspect ratio equal to ∼ 3).

Optimization of Strength-Electrical Conductivity Properties in Al-2Fe Alloy by Severe Plastic Deformation and Heat Treatment

2017 ◽  
Vol 20 (3) ◽  
pp. 1700867 ◽  
Author(s):  
Andrey E Medvedev ◽  
Maxim Y Murashkin ◽  
Nariman A Enikeev ◽  
Ruslan Z Valiev ◽  
Peter D Hodgson ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Electrical Conductivity ◽  
Plastic Deformation ◽  
Severe Plastic Deformation ◽  
Deformation And Heat Treatment

Structure and Hardness of Cryorolled and Heat-Treated 2xxx Aluminum Alloy

2010 ◽  
Vol 667-669 ◽  
pp. 925-930
Author(s):  
S.V. Krymskiy ◽  
Elena Avtokratova ◽  
M.V. Markushev ◽  
Maxim Yu. Murashkin ◽  
O.S. Sitdikov
Keyword(s):  
Heat Treatment ◽  
Solid Solution ◽  
Plastic Deformation ◽  
Aluminum Alloy ◽  
Severe Plastic Deformation ◽  
Coarse Grained ◽  
Aging Response ◽  
Heat Treated ◽  
Aluminum Solid Solution ◽  
A Cell

The effects of severe plastic deformation (SPD) by isothermal rolling at the temperature of liquid nitrogen combined with prior- and post-SPD heat treatment, on microstructure and hardness of Al-4.4%Cu-1.4%Mg-0.7%Mn (D16) alloy were investigated. It was found no nanostructuring even after straining to 75%. Сryodeformation leads to microshear banding and processing the high-density dislocation substructures with a cell size of ~ 100-200 nm. Such a structure remains almost stable under 1 hr annealing up to 200oC and with further temperature increase initially transforms to bimodal with a small fraction of nanograins and then to uniform coarse grained one. It is found the change in the alloy post–SPD aging response leading to more active decomposition of the preliminary supersaturated aluminum solid solution, and to the alloy extra hardening under aging with shorter times and at lower temperatures compared to T6 temper.

Deformation and Heat Treatment of Cold Drawn Gold

2007 ◽  
Vol 550 ◽  
pp. 289-294
Author(s):  
Suk Hoon Kang ◽  
Jae Hyung Cho ◽  
Joon Sub Hwang ◽  
Jong Soo Cho ◽  
Yong Jin Park ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Plastic Deformation ◽  
Mechanical Stability ◽  
Ion Beam ◽  
Quantitative Measure ◽  
Electron Backscattered Diffraction ◽  
Conducting Path ◽  
Deformation And Heat Treatment ◽  
Gold Wires

Cold drawn gold wires are widely applied in electronic packaging process to interconnect micro-electronic components. They basically provides a conducting path for electronic signal transfer, and experience thermo-mechanical loads in use. The mechanical stability of drawn gold wires is a matter of practical concern in the reliable functioning of electronic devices. It is known that mechanical properties of materials are deeply related to the microstructure. With appropriate control of deformation and heat processes, the mechanical properties of final products, such as tensile strength and elongation can be improved. Severe plastic deformation by torsion usually contributes to grain refinement and increment of strength. In this study, microstructure variations with torsion strain followed by drawing and heat treatment were investigated. Analyses by focused ion beam (FIB) and electron backscattered diffraction (EBSD) were carried out to characterize the effect of deformation and heat treatment on the drawn gold wires. Pattern quality of EBSD measurements was used as a quantitative measure for plastic deformation.

The Influence of Severe Plastic Deformation Process on Structure and Properties of AZ 31 Alloy after Selected Heat Treatment

2018 ◽  
Vol 275 ◽  
pp. 134-146
Author(s):  
Stanislav Rusz ◽  
Ondřej Hilšer ◽  
Stanislav Tylšar ◽  
Lubomír Čížek ◽  
Tomasz Tański ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Plastic Deformation ◽  
Severe Plastic Deformation ◽  
Structure Refinement ◽  
Hardness Measurement ◽  
Az31 Alloy ◽  
Strength Properties ◽  
Aviation Industry ◽  
Initial State

The technology of structure refinement in materials with the aim of achieving substantial mechanical properties and maintaining the required plasticity level is becoming increasingly useful in industrial practice. Magnesium alloys are very progressive materials for utilization in practice thanks to their high strength-to-weight ratios (tensile strength/density). The presented paper analyses the effect of the input heat treatment of the AZ31 alloy on the change of structure and strength properties through the process of severe plastic deformation (SPD), which finds an increasing utilization, especially in the automotive and aviation industry. For the study of the influence of the SPD process (ECAP method) on the properties of the AZ31 alloy, two types of thermal treatment of the initial state of the structure were selected. The analysis of the structure of the AZ31 alloy was performed in the initial state without heat treatment and subsequently after heat treatment. In the next part, the influence of the number of passes on the strengthening curves was evaluated. Mechanical properties of the AZ31 alloy after ECAP were evaluated by hardness measurement and completed by structure analysis.

Sign in / Sign up

Export Citation Format

Share Document