Numerical simulation of bistatic scattering from fractal rough surface in the finite element method

2001 ◽  
Vol 44 (1) ◽  
pp. 12-18 ◽  
Author(s):  
Zhongxin Li ◽  
Yaqiu Jin
Keyword(s):  
Numerical Simulation ◽  
Finite Element Method ◽  
Finite Element ◽  
Rough Surface ◽  
The Finite Element Method ◽  
Fractal Rough Surface ◽  
Bistatic Scattering ◽  
Element Method

scholarly journals Cold Expansion Process with Multiple Balls—Numerical Simulation and Comparison with Single Ball and Tapered Mandrels

Materials ◽  
2020 ◽  
Vol 13 (23) ◽  
pp. 5536
Author(s):  
David Curto-Cárdenas ◽  
Jose Calaf-Chica ◽  
Pedro Miguel Bravo Díez ◽  
Mónica Preciado Calzada ◽  
Maria-Jose Garcia-Tarrago
Keyword(s):  
Numerical Simulation ◽  
Finite Element Method ◽  
Finite Element ◽  
Fatigue Life ◽  
Experimental Tests ◽  
The Finite Element Method ◽  
Expansion Process ◽  
Cold Expansion ◽  
Hoop Stresses ◽  
Element Method

Cold expansion technology is an extended method used in aeronautics to increase fatigue life of holes and hence extending inspection intervals. During the cold expansion process, a mechanical mandrel is forced to pass along the hole generating compressive residual hoop stresses. The most widely accepted geometry for this mandrel is the tapered one and simpler options like balls have generally been rejected based on the non-conforming residual hoop stresses derived from their use. In this investigation a novelty process using multiple balls with incremental interference, instead of a single one, was simulated. Experimental tests were performed to validate the finite element method (FEM) models and residual hoop stresses from multiple balls simulation were compared with one ball and tapered mandrel simulations. Results showed that the use of three incremental balls significantly reduced the magnitude of non-conforming residual hoop stresses and the extension of these detrimental zone.

The Numerical Simulation of Effective Elastic Response for WC-Co Cemented Carbide

2015 ◽  
Vol 1096 ◽  
pp. 417-421
Author(s):  
Pei Luan Li ◽  
Zi Qian Huang
Keyword(s):  
Numerical Simulation ◽  
Finite Element Method ◽  
Finite Element ◽  
Theoretical Model ◽  
Material Properties ◽  
Cemented Carbide ◽  
Elastic Response ◽  
The Finite Element Method ◽  
Simulation Results ◽  
Element Method

By the use of finite element method, this paper predicts the effects of the shapes of reinforcements with different ductility (Co) on the effective elastic response for WC-Co cemented carbide. This paper conducts a comparative study on the material properties obtained through theoretical model, numerical simulation and experimental observations. Simulation results indicate that the finite element method is more sophisticated than the theoretical prediction.

Sign in / Sign up

Export Citation Format

Share Document