scholarly journals Three-dimensional intraplate stress distributions associated with topography and crustal density inhomogeneities beneath the Deccan Volcanic Province

1996 ◽  
Vol 105 (2) ◽  
pp. 143-155 ◽  
Author(s):  
P Mandal ◽  
R N Singh
Keyword(s):  
Three Dimensional ◽  
Stress Distributions ◽  
Deccan Volcanic Province ◽  
Volcanic Province ◽  
Intraplate Stress ◽  
Density Inhomogeneities ◽  
Crustal Density

Fluoride Accumulation in Groundwater from Semi-arid Part of Deccan Volcanic Province, India: A Cause of Urolithiasis Outbreak

2017 ◽  
Vol 1 (1) ◽  
pp. 9-17 ◽  
Author(s):  
Sanjay Kale ◽  
N. J. Pawar
Keyword(s):  
Medical Records ◽  
Fluoride Concentration ◽  
Data Generation ◽  
Deccan Volcanic Province ◽  
Temporal And Spatial Distribution ◽  
Volcanic Province ◽  
Fluoride Accumulation ◽  
Hot Days ◽  
Geochemical Investigation ◽  
Relationship Of

Groundwater fluoride and health problem was meticulously studied for dental and skeleton fluorosis except few studies on urolithiasis. Urolithiasis is multi-factorial disease and excess fluoride consumption is one of the causal factors. In view of this, increase of fluoride in groundwater is reported in semiarid Deccan Volcanic Province (DVP), India. To understand the fluoride and urolithiasis association, present study was carried out in Karha river basin of DVP region. Three stages of data generation were adopted for present study such as procuring of medical records of urolithiasis, previous groundwater chemistry data and geochemical investigation of 50 groundwater samples from representative villages. Further, these variables were used for correlation analysis, temporal and spatial distribution to find out their relationships. Result shows medical records of hospitals indicating the gradual increase in urolithiasis is reported during drought situations. In temporal variation, annual fluoride concentration of groundwater and hot days are positively correlated with annual urolith patients as well as spatial study supports the same. In conclusion, present study highlights the relationship of urolith formation with number of hot days, groundwater electrical conductivity and fluoride. However, detailed biomedical study may lead towards understanding of fluoride- urolithiasis relationship.

scholarly journals Comparison of Tooth- and Bone-Borne Appliances on the Stress Distributions and Displacement Patterns in the Facial Skeleton in Surgically Assisted Rapid Maxillary Expansion—A Finite Element Analysis (FEA) Study

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1152
Author(s):  
Rafał Nowak ◽  
Anna Olejnik ◽  
Hanna Gerber ◽  
Roman Frątczak ◽  
Ewa Zawiślak
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Three Dimensional ◽  
Element Model ◽  
Rapid Maxillary Expansion ◽  
Stress Distributions ◽  
Maxillary Expansion ◽  
Facial Skeleton ◽  
Element Analysis ◽  
Maxillary Constriction

The aim of this study was to compare the reduced stresses according to Huber’s hypothesis and the displacement pattern in the region of the facial skeleton using a tooth- or bone-borne appliance in surgically assisted rapid maxillary expansion (SARME). In the current literature, the lack of updated reports about biomechanical effects in bone-borne appliances used in SARME is noticeable. Finite element analysis (FEA) was used for this study. Six facial skeleton models were created, five with various variants of osteotomy and one without osteotomy. Two different appliances for maxillary expansion were used for each model. The three-dimensional (3D) model of the facial skeleton was created on the basis of spiral computed tomography (CT) scans of a 32-year-old patient with maxillary constriction. The finite element model was built using ANSYS 15.0 software, in which the computations were carried out. Stress distributions and displacement values along the 3D axes were found for each osteotomy variant with the expansion of the tooth- and the bone-borne devices at a level of 0.5 mm. The investigation showed that in the case of a full osteotomy of the maxilla, as described by Bell and Epker in 1976, the method of fixing the appliance for maxillary expansion had no impact on the distribution of the reduced stresses according to Huber’s hypothesis in the facial skeleton. In the case of the bone-borne appliance, the load on the teeth, which may lead to periodontal and orthodontic complications, was eliminated. In the case of a full osteotomy of the maxilla, displacements in the buccolingual direction for all the variables of the bone-borne appliance were slightly bigger than for the tooth-borne appliance.

Finite Element Analysis of Poor Distal Contact of the Femoral Component of a Cementless Hip Endoprosthesis

1993 ◽  
Vol 207 (4) ◽  
pp. 255-261 ◽  
Author(s):  
M Taylor ◽  
E W Abel
Keyword(s):  
Finite Element ◽  
Stress Distribution ◽  
Influencing Factor ◽  
Three Dimensional ◽  
Stress Distributions ◽  
Element Analysis ◽  
Hip Endoprosthesis ◽  
Applied Loading ◽  
Femoral Geometry ◽  
Contact Models

The difficulty of achieving good distal contact between a cementless hip endoprosthesis and the femur is well established. This finite element study investigates the effect on the stress distribution within the femur due to varying lengths of distal gap. Three-dimensional anatomical models of two different sized femurs were generated, based upon computer tomograph scans of two cadaveric specimens. A further six models were derived from each original model, with distal gaps varying from 10 to 60 mm in length. The resulting stress distributions within these were compared to the uniform contact models. The extent to which femoral geometry was an influencing factor on the stress distribution within the bone was also studied. Lack of distal contact with the prosthesis was found not to affect the proximal stress distribution within the femur, for distal gap lengths of up to 60 mm. In the region of no distal contact, the stress within the femur was at normal physiological levels associated with the applied loading and boundary conditions. The femoral geometry was found to have little influence on the stress distribution within the cortical bone. Although localized variations were noted, both femurs exhibited the same general stress distribution pattern.

Heat and Mass Diffusion Including Shrinkage and Hygrothermal Stress during Drying of Holed Ceramics Bricks

2011 ◽  
Vol 312-315 ◽  
pp. 971-976 ◽  
Author(s):  
J. Barbosa da Silva ◽  
G. Silva Almeida ◽  
W.C.P. Barbosa de Lima ◽  
Gelmires Araújo Neves ◽  
Antônio Gilson Barbosa de Lima
Keyword(s):  
Moisture Content ◽  
Three Dimensional ◽  
Average Moisture Content ◽  
Stress Distributions ◽  
Drying Process ◽  
Convective Boundary ◽  
Volume Method ◽  
Hygrothermal Stress ◽  
Thermo Physical Properties ◽  
Good Agreement

The Aim of this Work Is to Present a Three-Dimensional Mathematical Modelling to Predict Heat and Mass Transport inside the Industrial Brick with Rectangular Holes during the Drying Including Shrinkage and Hygrothermalelastic Stress Analysis. the Numerical Solution of the Diffusion Equation, Being Used the Finite-Volume Method, Considering Constant Thermo-Physical Properties and Convective Boundary Conditions at the Surface of the Solid, it Is Presented and Analyzed. Results of the Temperature, Moisture Content and Stress Distributions, and Drying and Heating Kinetics Are Shown and Analyzed. Results of the Average Moisture Content and Surface Temperature of the Brick along the Drying Process Are Compared with Experimental Data (T = 80.0oC and RH = 4.6 %) and Good Agreement Was Obtained. it Was Verified that the Largest Temperature, Moisture Content and Stress Gradients Are Located in the Intern and External Vertexes of the Brick.

FEM Simulation Analysis of Cross Wedge Rolling Process

2011 ◽  
Vol 381 ◽  
pp. 72-75
Author(s):  
Bin Li
Keyword(s):  
Simulation Analysis ◽  
Three Dimensional ◽  
Fem Simulation ◽  
Rolling Process ◽  
Stress Distributions ◽  
Cross Wedge Rolling ◽  
Forming Process ◽  
Pressure Distributions ◽  
Metal Forming Process ◽  
Rolling Load

This paper investigates the interfacial slip between the forming tool and workpiece in a relatively new metal forming process, cross-wedge rolling. Based on the finite elements method, three-dimensional mechanical model of cross wedge rolling process has been developed. Examples of numerical simulation for strain, stress distributions and rolling load components have been included. The main advantages of the finite element method are: the capability of obtaining detailed solutions of the mechanics in a deforming body, namely, stresses, shapes, strains or contact pressure distributions; and the computer codes, can be used for a large variety of problems by simply changing the input data.

CFD SIMULATION OF SHEAR STRESS AND SECONDARY FLOWS IN URETHRA

2007 ◽  
Vol 19 (02) ◽  
pp. 117-127 ◽  
Author(s):  
Yang-Yao Niu ◽  
Ding-Yu Chang
Keyword(s):  
Shear Stress ◽  
Cfd Simulation ◽  
Three Dimensional ◽  
Secondary Flows ◽  
Normal Female ◽  
Urinary System ◽  
Stress Distributions ◽  
Computational Fluid Dynamics Cfd ◽  
Peak Value ◽  
Lower Urinary

In this work, a preliminary numerical simulation of the lower urinary system using Computational Fluid Dynamics (CFD) is performed. Very few studies have been done on the simulation of three-dimensional urine through the lower urinary system. In this study, a simplified lower urinary model with rigid body assumption is proposed. The distributions of urine flow velocity, wall pressure and shear stress along the urethra are simulated based on MRI scanned uroflowmetry of a normal female. Numerical results show that violent secondary flows appear on the cross surface near the end of the urethra when the inflow rate is increased. The oscillative variation of pressure and shear stress distributions are found around the beginning section of the urethra when flow rate is at the peak value.

A Fast Three-Dimensional Model for Strip Rolling

2016 ◽  
Vol 716 ◽  
pp. 566-578 ◽  
Author(s):  
Christian Overhagen ◽  
Paul Josef Mauk
Keyword(s):  
Finite Element ◽  
Stress Gradient ◽  
Three Dimensional ◽  
Significant Loss ◽  
Three Dimensions ◽  
Beam Model ◽  
Stress Distributions ◽  
Three Dimensional Model ◽  
Strip Rolling ◽  
Lateral Direction

Rolling Models have come a long way from the first empirical relations about forward slip and bite conditions to their current state, which allows local quantities to be calculated in two and three dimensions. In this paper, state-of-the-art of analytical modelling of the rolling process is shown with a fully three-dimensional rolling model for hot and cold strip rolling with stress distributions in the longitudinal, vertical and lateral directions. For this purpose, von Karman’s strip approach is extended to account for the stress gradient in lateral direction, as was already shown in different papers. The stress gradient in the vertical (through-thickness) direction is introduced by a modern implementation of Orowan’s inhomogeneous deformation theory. The local stress distributions are compared to results from Finite-Element Calculations obtained with modern FEM codes. It will be shown, under which circumstances expensive FEM calculations can be replaced by simpler models like the one proposed here, which are more time and cost-effective without a significant loss in result precision. The rolling model is extended with a Finite Element Beam Model for work and backup roll deformation, as well as local work roll flattening and thermal crown for hot rolling. The Effects of those features on stress distribution and exit strip profile are shown for hot and cold rolling.

Sign in / Sign up

Export Citation Format

Share Document