A new PAA Sol-gel method to synthesis the spinel LiMn2O4 Material for Li-ion battery

2002 ◽  
Vol 7 (1) ◽  
pp. 97-101
Author(s):  
Zhan Hui ◽  
Zhou Yun-hong
Keyword(s):  
Sol Gel ◽  
Li Ion Battery ◽  
Spinel Limn2o4 ◽  
Gel Method ◽  
Sol Gel Method ◽  
Li Ion

scholarly journals TiO2/Si composites synthesized by sol–gel method and their improved electrode performance as Li-ion battery anodes

2013 ◽  
Vol 111 ◽  
pp. 575-580 ◽  
Author(s):  
Hiroyuki Usui ◽  
Kuniaki Wasada ◽  
Masahiro Shimizu ◽  
Hiroki Sakaguchi
Keyword(s):  
Sol Gel ◽  
Li Ion Battery ◽  
Gel Method ◽  
Electrode Performance ◽  
Sol Gel Method ◽  
Li Ion

Synthesis of LiNi0.5Mn1.5O4 Nano- and Micropolyhedra via Sol–Gel Method and Their Application for Li-Ion Batteries

2013 ◽  
Vol 2 (1) ◽  
pp. 68-72 ◽  
Author(s):  
Wei Liu ◽  
Jun Liu ◽  
Yanling Wan ◽  
Shaomin Ji ◽  
Yichun Zhou
Keyword(s):  
Sol Gel ◽  
Li Ion Batteries ◽  
Gel Method ◽  
Sol Gel Method ◽  
Li Ion

FACILE SOL–GEL SYNTHESIS OF Li[Li0.2Mn0.56Ni0.16Co0.08]O2 AS IMPROVED CATHODE MATERIAL FOR LITHIUM-ION BATTERIES

2013 ◽  
Vol 01 (04) ◽  
pp. 1340015
Author(s):  
WENJUAN HAO ◽  
HAN CHEN ◽  
YANHONG WANG ◽  
HANHUI ZHAN ◽  
QIANGQIANG TAN ◽  
...  
Keyword(s):  
Cathode Materials ◽  
Sol Gel ◽  
Specific Capacity ◽  
Lithium Ion ◽  
Electrochemical Performances ◽  
Acetate Tetrahydrate ◽  
Li Ion Batteries ◽  
Gel Method ◽  
Sol Gel Method ◽  
Li Ion

Li [ Li 0.2 Mn 0.56 Ni 0.16 Co 0.08] O 2 cathode materials for Li -ion batteries were synthesized by a facile sol–gel method followed by calcination at various temperatures (700°C, 800°C and 900°C). Lithium acetate dihydrate, manganese (II) acetate tetrahydrate, nickel (II) acetate tetrahydrate and cobalt (II) acetate tetrahydrate are employed as the metal precursors, and citric acid monohydrate as the chelating agent. For the obtained Li [ Li 0.2 Mn 0.56 Ni 0.16 Co 0.08] O 2 materials, the metal components existed in the form of Mn 4+, Ni 2+ and Co 3+, and their molar ratio was in good agreement with 0.56 : 0.16 : 0.08. The calcination temperature played an important role in the particle size, crystallinity and further electrochemical properties of the cathode materials. The Li [ Li 0.2 Mn 0.56 Ni 0.16 Co 0.08] O 2 material calcined at 800°C for 6 h showed the best electrochemical performances. Its discharge specific capacities cycled at 0.1 C, 0.5 C, 1 C and 2 C rates were 266.0 mAh g−1, 243.1 mAh g−1, 218.2 mAh g−1 and 192.9 mAh g−1, respectively. When recovered to 0.1 C rate, the discharge specific capacity was 260.2 mAh g−1 and the capacity loss is only 2.2%. This work demonstrates that the sol–gel method is a facile route to prepare high performance Li [ Li 0.2 Mn 0.56 Ni 0.16 Co 0.08] O 2 cathode materials for Li -ion batteries.

Li+ ion diffusion in LiMn2O4 thin film prepared by PVP sol–gel method

2006 ◽  
Vol 157 (1) ◽  
pp. 471-476 ◽  
Author(s):  
Young Ho Rho ◽  
Kaoru Dokko ◽  
Kiyoshi Kanamura
Keyword(s):  
Thin Film ◽  
Sol Gel ◽  
Ion Diffusion ◽  
Gel Method ◽  
Sol Gel Method ◽  
Li Ion

scholarly journals Li Conductivity of Nanocrystalline Li4Ti5O12 Prepared by a Sol-Gel Method and High-Energy Ball Milling

2009 ◽  
Vol 289-292 ◽  
pp. 565-570 ◽  
Author(s):  
W. Iwaniak ◽  
J. Fritzsche ◽  
M. Zukalová ◽  
R. Winter ◽  
Martin Wilkening ◽  
...  
Keyword(s):  
Particle Size ◽  
Crystallite Size ◽  
Sol Gel ◽  
High Energy ◽  
Average Particle ◽  
Li Ion Batteries ◽  
Gel Method ◽  
Sol Gel Method ◽  
Li Ion ◽  
20 Nm

Spinel-type structured Li4+xTi5O12 (0 6 x 6 3 ) is actually one of the most promising anode materials for Li ion batteries. In its nanostructured form it is already used in some commercially available Li ion batteries. As was recently shown by our group (Wilkening et al., Phys. Chem. Chem. Phys. 9 (2007) 1239), Li diffusivity in microcrystalline Li4+xTi5O12 with x = 0 is rather slow. In the present contribution the Li conductivity in nanocrystalline samples of the electronic insulator Li4Ti5O12 prepared by different routes is investigated using impedance spectroscopy. The mean crystallite size of the samples is about 20 nm. The ionic conductivity of nanocrystalline Li4Ti5O12 obtained by mechanical treatment is higher by about two orders of magnitude compared to that found for a material which was prepared following a sol-gel method. The latter resembles the behaviour of the microcrystalline sample with an average particle size in the μm range rather than that of a nanocrystalline ball milled one with a mean crystallite size of about than 20 nm. The larger conductivity of the ball milled sample is ascribed to a much higher defect density generated when the particle size is reduced mechanically.

Sign in / Sign up

Export Citation Format

Share Document