Control of three degrees-of-freedom underactuated manipulator using fuzzy based switching

2004 ◽  
Vol 8 (2) ◽  
pp. 153-158
Author(s):  
Lanka Udawatta ◽  
Keigo Watanabe ◽  
Kiyotaka Izumi ◽  
Kazuo Kiguchi
Keyword(s):  
Degrees Of Freedom ◽  
Underactuated Manipulator ◽  
Three Degrees Of Freedom

Vertical Planar Underactuated Manipulation Using a Gravity Compensation Mechanism

2005 ◽  
Vol 17 (5) ◽  
pp. 553-559 ◽  
Author(s):  
Yoshiki Ono ◽  
◽  
Toshio Morita ◽  
Keyword(s):  
Degrees Of Freedom ◽  
Position Control ◽  
Equilibrium Points ◽  
Gravity Compensation ◽  
Compensation Mechanism ◽  
Angular Variation ◽  
Underactuated Manipulator ◽  
Zero Equilibrium ◽  
Three Degrees Of Freedom ◽  
Active Base

We propose generating and erasing equilibrium points for passive joints, together with an underactuated manipulator having both vertical and horizontal planar type. This manipulator implements three degrees of freedom (DOF) by combining a passive two-DOF mechanical gravity canceller and an active base joint. Equilibrium points are erased and adjusted by angular variation of the base joint so equilibrium points are erased when gravity torque is zero. If gravity torque is not zero, equilibrium points depend on angular variation of the base joint. Experimental results show position control of the distal link through the mechanical gravity canceller is effective for underactuated manipulation.

Control of three degrees-of-freedom underactuated manipulator using fuzzy based switching

2004 ◽  
Vol 8 (2) ◽  
pp. 153-158 ◽  
Author(s):  
Lanka Udawatta ◽  
Keigo Watanabe ◽  
Kiyotaka Izumi ◽  
Kazuo Kiguchi
Keyword(s):  
Degrees Of Freedom ◽  
Underactuated Manipulator ◽  
Three Degrees Of Freedom

scholarly journals Active Disturbance Rejection for a Three Degrees of Freedom Gyroscope

2018 ◽  
Vol 51 (13) ◽  
pp. 372-377 ◽  
Author(s):  
Juan E. Andrade García ◽  
Alejandra Ferreira de Loza ◽  
Luis T. Aguilar ◽  
Ramón I. Verdés
Keyword(s):  
Disturbance Rejection ◽  
Degrees Of Freedom ◽  
Active Disturbance Rejection ◽  
Three Degrees Of Freedom

scholarly journals Cyclic Deformation of Microcantilevers Using In-Situ Micromanipulation

2021 ◽  
Author(s):  
A. H. S. Iyer ◽  
M. H. Colliander
Keyword(s):  
Degrees Of Freedom ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Structural Components ◽  
Cyclic Testing ◽  
Phase Boundaries ◽  
Bulk Specimen ◽  
Arbitrary Position ◽  
Three Degrees Of Freedom

Abstract Background The trend in miniaturisation of structural components and continuous development of more advanced crystal plasticity models point towards the need for understanding cyclic properties of engineering materials at the microscale. Though the technology of focused ion beam milling enables the preparation of micron-sized samples for mechanical testing using nanoindenters, much of the focus has been on monotonic testing since the limited 1D motion of nanoindenters imposes restrictions on both sample preparation and cyclic testing. Objective/Methods In this work, we present an approach for cyclic microcantilever bending using a micromanipulator setup having three degrees of freedom, thereby offering more flexibility. Results The method has been demonstrated and validated by cyclic bending of Alloy 718plus microcantilevers prepared on a bulk specimen. The experiments reveal that this method is reliable and produces results that are comparable to a nanoindenter setup. Conclusions Due to the flexibility of the method, it offers straightforward testing of cantilevers manufactured at arbitrary position on bulk samples with fully reversed plastic deformation. Specific microstructural features, e.g., selected orientations, grain boundaries, phase boundaries etc., can therefore be easily targeted.

scholarly journals Galloping Stability and Wind Tunnel Test of Iced Quad Bundled Conductors considering Wake Effect

2020 ◽  
Vol 2020 ◽  
pp. 1-15
Author(s):  
Xiaohui Liu ◽  
Ming Zou ◽  
Chuan Wu ◽  
Mengqi Cai ◽  
Guangyun Min ◽  
...  
Keyword(s):  
Wind Tunnel ◽  
Transmission Lines ◽  
Degrees Of Freedom ◽  
Wind Tunnel Test ◽  
Aerodynamic Coefficients ◽  
Wake Effect ◽  
Aerodynamic Coefficient ◽  
Set Up ◽  
The Stability ◽  
Three Degrees Of Freedom

A new quad bundle conductor galloping model considering wake effect is proposed to solve the problem of different aerodynamic coefficients of each subconductor of iced quad bundle conductor. Based on the quasistatic theory, a new 3-DOF (three degrees of freedom) galloping model of iced quad bundle conductors is established, which can accurately reflect the energy transfer and galloping of quad bundle conductor in three directions. After a series of formula derivations, the conductor stability judgment formula is obtained. In the wind tunnel test, according to the actual engineering situation, different variables are set up to accurately simulate the galloping of iced quad bundle conductor under the wind, and the aerodynamic coefficient is obtained. Finally, according to the stability judgment formula of this paper, calculate the critical wind speed of conductor galloping through programming. The dates of wind tunnel test and calculation in this paper can be used in the antigalloping design of transmission lines.

Analysis and Optimization of a New Differentially Driven Cable Parallel Robot

2015 ◽  
Vol 7 (3) ◽  
Author(s):  
Hamed Khakpour ◽  
Lionel Birglen ◽  
Souheil-Antoine Tahan
Keyword(s):  
Kinematic Analysis ◽  
Design Methodology ◽  
Degrees Of Freedom ◽  
Parallel Robot ◽  
Cable Robot ◽  
Proper Design ◽  
Two Indices ◽  
Three Degrees Of Freedom ◽  
Cable Robots

In this paper, a new three degrees of freedom (DOF) differentially actuated cable parallel robot is proposed. This mechanism is driven by a prismatic actuator and three cable differentials. Through this design, the idea of using differentials in the structure of a spatial cable robot is investigated. Considering their particular properties, the kinematic analysis of the robot is presented. Then, two indices are defined to evaluate the workspaces of the robot. Using these indices, the robot is subsequently optimized. Finally, the performance of the optimized differentially driven robot is compared with fully actuated mechanisms. The results show that through a proper design methodology, the robot can have a larger workspace and better performance using differentials than the fully driven cable robots using the same number of actuators.

Sign in / Sign up

Export Citation Format

Share Document