Elevated temperature tensile behavior of Ti-25AI-10Nb-3V-1Mo

1995 ◽  
Vol 26 (3) ◽  
pp. 703-720 ◽  
Author(s):  
C. H. Ward ◽  
A. W. Thompson ◽  
J. C. Williams
Keyword(s):  
Elevated Temperature ◽  
Tensile Behavior ◽  
Elevated Temperature Tensile

Elevated Temperature Tensile Behavior of Nextel™ 720 Fibers

Materials ◽  
2003 ◽  
Author(s):  
D. M. Pai ◽  
S. N. Yarmolenko ◽  
E. Freeman ◽  
L. P. Zawada
Keyword(s):  
High Temperature ◽  
Elevated Temperature ◽  
Room Temperature ◽  
Thermal Exposure ◽  
Strength Distribution ◽  
Tensile Behavior ◽  
Beneficial Effects ◽  
Elevated Temperature Tensile ◽  
Long Duration ◽  
Temperature Exposure

The tensile behavior of Nextel 720 fibers at elevated temperature was compared with room temperature results for both bare and monazite-coated fibers. While coated and uncoated fibers have nearly identical tensile strengths and Weibull moduli at room temperature, differences in response were seen at elevated temperature. Coated fibers tested at 1200°C were found to have a 40% drop in strength. Uncoated fibers at high temperature exhibited 55% less strength than at room temperature. However, the tensile strength distribution for uncoated fibers tested at high temperature exhibited two distinct populations, indicating two different failure mechanisms. One population showed a 50% drop while the other showed a 64% drop. The coating was thus found to have a protective effect in terms of short-duration high-temperature exposure. Further, the effect of soaking on strength was investigated by thermally soaking coated and uncoated fibers in air at 1200°C for 100 hours prior to tensile testing at elevated temperature. In this case, the long duration of thermal exposure appeared to eliminate the beneficial effects of the coating. Soaked fibers, both coated and uncoated, were found to have nearly identical strengths at 1200°C—a reduction of about 60%.

Elevated Temperature Tensile Behavior of Rheo-Cast 7075-T6 Al Alloy Produced by GISS Technique

2014 ◽  
Vol 881-883 ◽  
pp. 1597-1600 ◽  
Author(s):  
Narissara Mahathaninwong ◽  
Sirikul Wisutmethangoon ◽  
Thawatchai Plookphol ◽  
Jessada Wannasin ◽  
Suchart Chantaramanee
Keyword(s):  
Tensile Strength ◽  
Elevated Temperature ◽  
Ultimate Tensile Strength ◽  
Yield Strength ◽  
Room Temperature ◽  
Tensile Behavior ◽  
Al Alloy ◽  
Elevated Temperature Tensile ◽  
Semi Solid ◽  
Increasing Temperature

Tensile properties of rheo-cast 7075-T6 Al alloy produced by Gas Induced Semi-Solid (GISS) technique was investigated as a function of temperatures from 25°C to 250 °C in order to assess the potent of high temperature applications. It was found that the ultimate tensile strength and yield strength of the alloy decreased steadily with increasing temperature. There was loss in strength of about 33% at 200°C and 46% at 250 °C comparing to the strength at room temperature. At T = 250 °C, the ultimate tensile strength and yield strength of the rheo-cast 7075-T6 Al alloy were higher than those of the wrought 7075-T651 Al alloy. Keyword: 7075 Al alloy; Gas Induced Semi Solid (GISS) technique; Elevated temperature tensile.

Effect of microalloying (Ca, Sr, and Ce) on elevated temperature tensile behavior of AZ31 magnesium sheet alloy

2011 ◽  
Vol 528 (10-11) ◽  
pp. 3761-3770 ◽  
Author(s):  
L. Shang ◽  
S. Yue ◽  
R. Verma ◽  
P. Krajewski ◽  
C. Galvani ◽  
...  
Keyword(s):  
Elevated Temperature ◽  
Tensile Behavior ◽  
Magnesium Sheet ◽  
Sheet Alloy ◽  
Elevated Temperature Tensile
Sign in / Sign up

Export Citation Format

Share Document