Influence of deformation history on the yield locus and stress-strain behavior of aluminum and copper

1973 ◽  
Vol 4 (4) ◽  
pp. 985-989 ◽  
Author(s):  
S. S. Hecker
Keyword(s):  
Yield Locus ◽  
Deformation History ◽  
Stress Strain ◽  
Strain Behavior

scholarly journals Lower Bound Yield Locus Calculations

1990 ◽  
Vol 12 (1-3) ◽  
pp. 89-101 ◽  
Author(s):  
William Hosford ◽  
Aitor Galdos
Keyword(s):  
Lower Bound ◽  
Upper Bound ◽  
Work Hardening ◽  
Stress Ratio ◽  
Yield Criterion ◽  
Yield Locus ◽  
Stress Strain ◽  
Strain Behavior ◽  
Yield Loci ◽  
The Hill

A lower-bound model for the deformation of work-hardening polycrystals is proposed. All grains are assumed to be loaded under the same stress and the stress–strain behavior is found by averaging the strains in all grains. The shapes of the yield loci have been calculated for textured metals which deform by {111} 〈110〉 slip (fcc) and by 〈111〉-pencil glide (bcc). As with the corresponding upper-bound models, the yield loci are best described by an anisotropic yield criterion with an exponent of 6 to 10 (instead of 2 as in the Hill theory). Also it is shown that a model of polycrystal deformation in which the grains are loaded to the same stress ratio (but not the same level of stresses) violates normality and is not a lower bound.

Stress Strain Behavior of Steel Fibre Based Concrete in Compression

2012 ◽  
Vol 1 (3) ◽  
pp. 32-38
Author(s):  
Tantary M.A ◽  
◽  
Upadhyay A ◽  
Prasad J ◽  
◽  
...  
Keyword(s):  
Steel Fibre ◽  
Stress Strain ◽  
Strain Behavior

Cord/Rubber Material Properties

1985 ◽  
Vol 58 (4) ◽  
pp. 830-856 ◽  
Author(s):  
R. J. Cembrola ◽  
T. J. Dudek
Keyword(s):  
Finite Element ◽  
Material Model ◽  
Rubber Composites ◽  
Stress Strain ◽  
Element Analysis ◽  
Rubber Layer ◽  
Strain Behavior ◽  
Nonlinear Stress ◽  
Interlaminar Shear ◽  
Mechanics Of Composite Materials

Abstract Recent developments in nonlinear finite element methods (FEM) and mechanics of composite materials have made it possible to handle complex tire mechanics problems involving large deformations and moderate strains. The development of an accurate material model for cord/rubber composites is a necessary requirement for the application of these powerful finite element programs to practical problems but involves numerous complexities. Difficulties associated with the application of classical lamination theory to cord/rubber composites were reviewed. The complexity of the material characterization of cord/rubber composites by experimental means was also discussed. This complexity arises from the highly anisotropic properties of twisted cords and the nonlinear stress—strain behavior of the laminates. Micromechanics theories, which have been successfully applied to hard composites (i.e., graphite—epoxy) have been shown to be inadequate in predicting some of the properties of the calendered fabric ply material from the properties of the cord and rubber. Finite element models which include an interply rubber layer to account for the interlaminar shear have been shown to give a better representation of cord/rubber laminate behavior in tension and bending. The application of finite element analysis to more refined models of complex structures like tires, however, requires the development of a more realistic material model which would account for the nonlinear stress—strain properties of cord/rubber composites.

Effect of Residual Stress or Plastic Deformation History on Fatigue Life Simulation of Pipeline Dents

2018 ◽  
Author(s):  
Xian-Kui Zhu ◽  
Rick Wang
Keyword(s):  
Residual Stress ◽  
Plastic Deformation ◽  
Fatigue Life ◽  
Residual Stresses ◽  
Three Dimensional ◽  
Strain History ◽  
Deformation History ◽  
Stress Strain ◽  
Element Analysis ◽  
Fea Model

Mechanical dents often occur in transmission pipelines, and are recognized as one of major threats to pipeline integrity because of the potential fatigue failure due to cyclic pressures. With matured in-line-inspection (ILI) technology, mechanical dents can be identified from the ILI runs. Based on ILI measured dent profiles, finite element analysis (FEA) is commonly used to simulate stresses and strains in a dent, and to predict fatigue life of the dented pipeline. However, the dent profile defined by ILI data is a purely geometric shape without residual stresses nor plastic deformation history, and is different from its actual dent that contains residual stresses/strains due to dent creation and re-rounding. As a result, the FEA results of an ILI dent may not represent those of the actual dent, and may lead to inaccurate or incorrect results. To investigate the effect of residual stress or plastic deformation history on mechanics responses and fatigue life of an actual dent, three dent models are considered in this paper: (a) a true dent with residual stresses and dent formation history, (b) a purely geometric dent having the true dent profile with all stress/strain history removed from it, and (c) a purely geometric dent having an ILI defined dent profile with all stress/strain history removed from it. Using a three-dimensional FEA model, those three dents are simulated in the elastic-plastic conditions. The FEA results showed that the two geometric dents determine significantly different stresses and strains in comparison to those in the true dent, and overpredict the fatigue life or burst pressure of the true dent. On this basis, suggestions are made on how to use the ILI data to predict the dent fatigue life.

Compressive stress–strain behavior of steel fiber reinforced-recycled aggregate concrete

2014 ◽  
Vol 46 ◽  
pp. 65-72 ◽  
Author(s):  
Jodilson Amorim Carneiro ◽  
Paulo Roberto Lopes Lima ◽  
Mônica Batista Leite ◽  
Romildo Dias Toledo Filho
Keyword(s):  
Compressive Stress ◽  
Steel Fiber ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Fiber Reinforced ◽  
Stress Strain ◽  
Aggregate Concrete ◽  
Strain Behavior

Effect of cooling rates on stress-strain behavior in Au-47.5 at.%Cd alloy

1978 ◽  
Vol 12 (3) ◽  
pp. 265-269 ◽  
Author(s):  
S. Miura ◽  
F. Hori ◽  
N. Nakanishi
Keyword(s):  
Stress Strain ◽  
Cooling Rates ◽  
Strain Behavior
Sign in / Sign up

Export Citation Format

Share Document