Process and structural aspects of melt-spun nickel-base superalloy ribbons

1983 ◽  
Vol 14 (9) ◽  
pp. 1817-1823 ◽  
Author(s):  
H. H. Liebermann ◽  
R. E. Maxwell ◽  
R. W. Smashey ◽  
J. L. Walter
Keyword(s):  
Nickel Base Superalloy ◽  
Melt Spun ◽  
Nickel Base ◽  
Structural Aspects ◽  
Base Superalloy

Comparison of Rapidly Solidified Nickel Base Superalloys Prepared by Melt Spinning and Plasma Deposition

1983 ◽  
Vol 28 ◽  
Author(s):  
A.I. Taub ◽  
M.R. Jackson ◽  
S.C. Huang ◽  
E.L. Hall
Keyword(s):  
Tensile Testing ◽  
Melt Spinning ◽  
Plasma Deposition ◽  
Nickel Base Superalloy ◽  
Petch Relation ◽  
Melt Spun ◽  
Nickel Base Superalloys ◽  
Nickel Base ◽  
Rapidly Solidified ◽  
Base Superalloy

ABSTRACTThe microstructure and yield strength of two nickel base superalloys prepared by melt spinning and plasma deposition are compared in the as-solidified condition and after annealing. The results support the interpretation of the yield strengths obtained by tensile testing melt spun ribbon as representative of the values obtained for bulk specimens with equivalent microstructures. The effectiveness of grain size strengthening in a nickel base superalloy is also examined. The Hall-Petch relation appears to be obeyed, with a slope k = .77±.15 MPa−m1/2.

Dependence of Intergranular Fracture on Boundary Topography and Cohesion

1973 ◽  
Vol 31 ◽  
pp. 150-151
Author(s):  
J. E. Doherty ◽  
A. F. Giamei ◽  
B. H. Kear ◽  
C. W. Steinke
Keyword(s):  
Grain Boundary ◽  
Room Temperature ◽  
Nickel Base Superalloy ◽  
Boundary Shear ◽  
Room Temperature Ductility ◽  
Solid Solution Matrix ◽  
Nickel Base ◽  
Solution Matrix ◽  
Different Levels ◽  
Base Superalloy

Recently we have been investigating a class of nickel-base superalloys which possess substantial room temperature ductility. This improvement in ductility is directly related to improvements in grain boundary strength due to increased boundary cohesion through control of detrimental impurities and improved boundary shear strength by controlled grain boundary micros true tures.For these investigations an experimental nickel-base superalloy was doped with different levels of sulphur impurity. The micros tructure after a heat treatment of 1360°C for 2 hr, 1200°C for 16 hr consists of coherent precipitates of γ’ Ni3(Al,X) in a nickel solid solution matrix.

Characterization of Coherent, Ordered Precipitates in Nickel-Base Alloys

1973 ◽  
Vol 31 ◽  
pp. 144-145
Author(s):  
B. H. Kear ◽  
J. M. Oblak
Keyword(s):  
Stable Phase ◽  
Nickel Base Superalloy ◽  
Alloy 718 ◽  
Commercial Alloy ◽  
Precipitate Morphology ◽  
Continuous Precipitation ◽  
Nickel Base ◽  
Base Superalloy ◽  
Strengthening Precipitate

A nickel-base superalloy is essentially a Ni/Cr solid solution hardened by additions of Al (Ti, Nb, etc.) to precipitate a coherent, ordered phase. In most commercial alloy systems, e.g. B-1900, IN-100 and Mar-M200, the stable precipitate is Ni3 (Al,Ti) γ′, with an LI2structure. In A lloy 901 the normal precipitate is metastable Nis Ti3 γ′ ; the stable phase is a hexagonal Do2 4 structure. In Alloy 718 the strengthening precipitate is metastable γ″, which has a body-centered tetragonal D022 structure.Precipitate MorphologyIn most systems the ordered γ′ phase forms by a continuous precipitation re-action, which gives rise to a uniform intragranular dispersion of precipitate particles. For zero γ/γ′ misfit, the γ′ precipitates assume a spheroidal.

Sign in / Sign up

Export Citation Format

Share Document