Influence of microfabric on geomechanical behaviour of tertiary finegrained sedimentary rocks from Central North Island, New Zealand

1988 ◽  
Vol 38 (1) ◽  
pp. 83-93 ◽  
Author(s):  
F. Huppert
2012 ◽  
Vol 77 (2) ◽  
pp. 247-255 ◽  
Author(s):  
Pavle Premovic ◽  
Budimir Ilic ◽  
Milos Djordjevic

The Cretaceous-Paleogene boundary clays at H?jerup and Woodside Creek show anomalous enrichments of iridium compared with the marine sedimentary rocks. For the average iridium content of 465 ppb in CI chondrite the estimate of the carbonaceous chondritic proportions in the decarbonated iridium-rich boundary layers, based on the integrated iridium fluencies, is about 26% at H?jerup and 65% at Woodside Creek. These proportions are most likely too high due to a significant Ir influx from the nearby marine or continental site to these sections.


2003 ◽  
Vol 109 (12) ◽  
pp. XXIII-XXIV
Author(s):  
Masayuki Sakakibara ◽  
Toyosaburo Sakai ◽  
Rie S. Hori ◽  
Bernhard Spörli ◽  
Touru Fujiki ◽  
...  

2021 ◽  
Author(s):  
◽  
Geoffrey Jonathan Rait

<p>Raukumara Peninsula lies at the northeastern end of the East Coast Deformed Belt, a province of deformed Late Mesozoic-Late Cenozoic rocks on the eastern edges of the North Island and northern South Island of New Zealand. Late Cenozoic deformation in this province is associated with westward subduction of the Pacific Plate, which started at about the beginning of the Miocene. Early Miocene tectonism on Raukumara Peninsula took place in a hitherto little-known thrust belt, the East Coast Allochthon. The configuration, evolution and origin of this thrust belt are the subjects of this thesis. The thrust belt extends 110 km from the thrust front in the southwest to the northeastern tip of Raukumara Peninsula. Internal structures strike northwest, perpendicular to the present trend of the continental margin but parallel to the Early Miocene trend suggested by plate reconstructions and paleomagnetic studies. The structure and kinematic evolution of the thrust belt were investigated by detailed mapping of three key areas in its central part and by analysis of previous work throughout the region. Gross differences in structure lead to the division of the belt into three zones: southern, central and northern. Deformation in the southern and central zones (the southwestern two-thirds of the system) was thin-skinned, involving southwestward transport of thrust sheets above a decollement horizon at the top of the Maastrichtian-Paleocene Whangai Formation. The decollement is exposed in the northwest due to southeastward tilting accompanying post-Miocene uplift of the Raukumara Range. Deformation in the northern zone involved reactivations of northeast-directed Cretaceous thrusts as well as southwestward emplacement of allochthonous sheets. Stratigraphic relationships show that thrusting took place during = 6 m.y. in the earliest Miocene. The 18 km wide southern zone is an emergent imbricate fan of rocks detached from above the Whangai Formation in a piggy-back sequence and transported less than about 18 km at rates of 2.6-3.6 mm/yr (plus-minus 20%-100%). The central and northern zones include rocks older than Whangai Formation. The sheets of the central zone and the southwest-directed sheets of the northern zone make up three major allochthonous units: the Waitahaia allochthon, consisting predominantly of mid-Cretaceous flysch above the Waitahaia Fault and equivalent structures, at the bottom of the thrust pile; the Te Rata allochthon, of Late Cretaceous-Early Tertiary continental margin sediments above the Te Rata Thrust, in the middle; and the Matakaoa sheet, an ophiolite body of mid-Cretaceous-Eocene basaltic and pelagic sedimentary rocks, at the top and back of the thrust belt. The Waitahaia allochthon was emplaced first and was subsequently breached by the Te Rata Thrust. The mid-Cretaceous rocks of the Waitahaia allochthon are mostly overturned, a result of the southwest-directed Early Miocene thrusting overprinting a Cretaceous structure of predominantly southwestward dips. The Te Rata allochthon comprises a complex pile of thrust sheets and slices with a general older-on-younger stacking order but with common reversals. Synorogenic sedimentary rocks occur within it. The complexity of internal structure of these two allochthons suggests they have undergone more than the 50% shortening estimated for the southern zone. The minimum southwestward displacement of the Te Rata allochthon is 60 km. The minimum displacements of the Waitahaia and Matakaoa allochthons are 55-195 km and 115-530 km respectively, depending on whether the Te Rata allochthon originally lay in front of the original position of the Waitahaia allochthon or was originally the upper part of the Waitahaia allochthon, and on the amounts of internal shortening of the allochthons. Over the = 6 m.y. period of thrusting, these estimates imply displacement rates for the Matakaoa sheet of 19-88 mm/yr. The average plate convergence rate at East Cape for the period 36-20 Ma is estimated at 25-30 mm/yr; the rate for the Early Miocene-- when subduction was active--may have been faster. Reasonable displacement rates for the Matakaoa sheet would result if the Te Rata allochthon was originally the upper part of the Waitahaia allochthon and if both allochthons have been shortened somewhat less than 50%. The emplacement mechanism of the Matakaoa ophiolite is elucidated by comparison with Northland, northwest along strike from Raukumara Peninsula, onto which correlative rocks were emplaced at the same time. The thinness of the Northland ophiolite bodies, their composition of rocks typical of the uppermost levels of oceanic crust, and the start of andesitic volcanism accompanying their obduction show that they were emplaced as a thin flake of oceanic crust which peeled off the downgoing slab during the inception of southwestward subduction. The reason the ophiolites were initially peeled from the slab is probably that their upper levels prograded southwestward over sediments of the Northland-Raukumara continental margin. In such a situation, initial compression would have led to formation of a northeast-dipping thrust at the volcanic/sediment interface; this thrust would then have propagated back into the downgoing plate with continued convergence, allowing the ophiolites to climb up the continental slope pushing the allochthonous sedimentary sheets ahead of them.</p>


1916 ◽  
Vol 3 (6) ◽  
pp. 243-249 ◽  
Author(s):  
C. A. Cotton

As is well known, the skeleton or oldermass of New Zealand is largely composed of a mass of deformed sedimentary rocks, the precise ages of the members of which are in doubt but do not affect the problem under consideration. The most profound deformation of this vast sedimentary group took place in late Jurassic or early Cretaceous times during what may be termed the “Mesozoic orogenic period”, when probably a great mountain range came into existence.


2021 ◽  
Author(s):  
◽  
Geoffrey Jonathan Rait

<p>Raukumara Peninsula lies at the northeastern end of the East Coast Deformed Belt, a province of deformed Late Mesozoic-Late Cenozoic rocks on the eastern edges of the North Island and northern South Island of New Zealand. Late Cenozoic deformation in this province is associated with westward subduction of the Pacific Plate, which started at about the beginning of the Miocene. Early Miocene tectonism on Raukumara Peninsula took place in a hitherto little-known thrust belt, the East Coast Allochthon. The configuration, evolution and origin of this thrust belt are the subjects of this thesis. The thrust belt extends 110 km from the thrust front in the southwest to the northeastern tip of Raukumara Peninsula. Internal structures strike northwest, perpendicular to the present trend of the continental margin but parallel to the Early Miocene trend suggested by plate reconstructions and paleomagnetic studies. The structure and kinematic evolution of the thrust belt were investigated by detailed mapping of three key areas in its central part and by analysis of previous work throughout the region. Gross differences in structure lead to the division of the belt into three zones: southern, central and northern. Deformation in the southern and central zones (the southwestern two-thirds of the system) was thin-skinned, involving southwestward transport of thrust sheets above a decollement horizon at the top of the Maastrichtian-Paleocene Whangai Formation. The decollement is exposed in the northwest due to southeastward tilting accompanying post-Miocene uplift of the Raukumara Range. Deformation in the northern zone involved reactivations of northeast-directed Cretaceous thrusts as well as southwestward emplacement of allochthonous sheets. Stratigraphic relationships show that thrusting took place during = 6 m.y. in the earliest Miocene. The 18 km wide southern zone is an emergent imbricate fan of rocks detached from above the Whangai Formation in a piggy-back sequence and transported less than about 18 km at rates of 2.6-3.6 mm/yr (plus-minus 20%-100%). The central and northern zones include rocks older than Whangai Formation. The sheets of the central zone and the southwest-directed sheets of the northern zone make up three major allochthonous units: the Waitahaia allochthon, consisting predominantly of mid-Cretaceous flysch above the Waitahaia Fault and equivalent structures, at the bottom of the thrust pile; the Te Rata allochthon, of Late Cretaceous-Early Tertiary continental margin sediments above the Te Rata Thrust, in the middle; and the Matakaoa sheet, an ophiolite body of mid-Cretaceous-Eocene basaltic and pelagic sedimentary rocks, at the top and back of the thrust belt. The Waitahaia allochthon was emplaced first and was subsequently breached by the Te Rata Thrust. The mid-Cretaceous rocks of the Waitahaia allochthon are mostly overturned, a result of the southwest-directed Early Miocene thrusting overprinting a Cretaceous structure of predominantly southwestward dips. The Te Rata allochthon comprises a complex pile of thrust sheets and slices with a general older-on-younger stacking order but with common reversals. Synorogenic sedimentary rocks occur within it. The complexity of internal structure of these two allochthons suggests they have undergone more than the 50% shortening estimated for the southern zone. The minimum southwestward displacement of the Te Rata allochthon is 60 km. The minimum displacements of the Waitahaia and Matakaoa allochthons are 55-195 km and 115-530 km respectively, depending on whether the Te Rata allochthon originally lay in front of the original position of the Waitahaia allochthon or was originally the upper part of the Waitahaia allochthon, and on the amounts of internal shortening of the allochthons. Over the = 6 m.y. period of thrusting, these estimates imply displacement rates for the Matakaoa sheet of 19-88 mm/yr. The average plate convergence rate at East Cape for the period 36-20 Ma is estimated at 25-30 mm/yr; the rate for the Early Miocene-- when subduction was active--may have been faster. Reasonable displacement rates for the Matakaoa sheet would result if the Te Rata allochthon was originally the upper part of the Waitahaia allochthon and if both allochthons have been shortened somewhat less than 50%. The emplacement mechanism of the Matakaoa ophiolite is elucidated by comparison with Northland, northwest along strike from Raukumara Peninsula, onto which correlative rocks were emplaced at the same time. The thinness of the Northland ophiolite bodies, their composition of rocks typical of the uppermost levels of oceanic crust, and the start of andesitic volcanism accompanying their obduction show that they were emplaced as a thin flake of oceanic crust which peeled off the downgoing slab during the inception of southwestward subduction. The reason the ophiolites were initially peeled from the slab is probably that their upper levels prograded southwestward over sediments of the Northland-Raukumara continental margin. In such a situation, initial compression would have led to formation of a northeast-dipping thrust at the volcanic/sediment interface; this thrust would then have propagated back into the downgoing plate with continued convergence, allowing the ophiolites to climb up the continental slope pushing the allochthonous sedimentary sheets ahead of them.</p>


1999 ◽  
Vol 190 ◽  
pp. 563-566
Author(s):  
J. D. Pritchard ◽  
W. Tobin ◽  
J. V. Clausen ◽  
E. F. Guinan ◽  
E. L. Fitzpatrick ◽  
...  

Our collaboration involves groups in Denmark, the U.S.A. Spain and of course New Zealand. Combining ground-based and satellite (IUEandHST) observations we aim to determine accurate and precise stellar fundamental parameters for the components of Magellanic Cloud Eclipsing Binaries as well as the distances to these systems and hence the parent galaxies themselves. This poster presents our latest progress.


Author(s):  
Ronald S. Weinstein ◽  
N. Scott McNutt

The Type I simple cold block device was described by Bullivant and Ames in 1966 and represented the product of the first successful effort to simplify the equipment required to do sophisticated freeze-cleave techniques. Bullivant, Weinstein and Someda described the Type II device which is a modification of the Type I device and was developed as a collaborative effort at the Massachusetts General Hospital and the University of Auckland, New Zealand. The modifications reduced specimen contamination and provided controlled specimen warming for heat-etching of fracture faces. We have now tested the Mass. General Hospital version of the Type II device (called the “Type II-MGH device”) on a wide variety of biological specimens and have established temperature and pressure curves for routine heat-etching with the device.


Sign in / Sign up

Export Citation Format

Share Document