Some new results on least square values for TU games

Top ◽  
1998 ◽  
Vol 6 (1) ◽  
pp. 139-158 ◽  
Author(s):  
Luis M. Ruiz ◽  
Federico Valenciano ◽  
José M. Zarzuelo
1998 ◽  
Vol 24 (1-2) ◽  
pp. 109-130 ◽  
Author(s):  
Luis M. Ruiz ◽  
Federico Valenciano ◽  
Jose M. Zarzuelo

2020 ◽  
Author(s):  
Xia Zhang ◽  
Rene van den Brink ◽  
Arantza Estevez-Fernandez ◽  
Hao Sun

1985 ◽  
Vol 17 (6-7) ◽  
pp. 903-914 ◽  
Author(s):  
R. H. Aalderink ◽  
L. Lijklema ◽  
J. Breukelman ◽  
W. van Raaphorst ◽  
A. G. Brinkman

The mass balance of suspended solids in a shallow lake was modelled as the net result of resuspension and settling. Four different formulations for the flux of resuspension were used. Two equations were based on the conception of wave induced resuspension, the other two used the flow field induced shear stress as the driving force for resuspension. Parameter estimations based on experimental time series of wind velocity and SS concentration produced lower least square values with the models based on flow induced resuspension. The model parameter representing settling was in reasonable accordance with the settling velocity obtained from sediment traps. The spread in results can be explained by a lack of homogeneity and horizontal transport.


1996 ◽  
Vol 25 (1) ◽  
pp. 113-134 ◽  
Author(s):  
Luis M. Ruiz ◽  
Federico Valenciano ◽  
Jose M. Zarzuelo
Keyword(s):  

2002 ◽  
Vol 19 (3) ◽  
pp. 533-550 ◽  
Author(s):  
Annick Laruelle ◽  
Vincent Merlin

Author(s):  
Kjersti Gjønnes ◽  
Jon Gjønnes

Electron diffraction intensities can be obtained at large scattering angles (sinθ/λ ≥ 2.0), and thus structure information can be collected in regions of reciprocal space that are not accessable with other diffraction methods. LACBED intensities in this range can be utilized for determination of accurate temperature factors or for refinement of coordinates. Such high index reflections can usually be treated kinematically or as a pertubed two-beam case. Application to Y Ba2Cu3O7 shows that a least square refinememt based on integrated intensities can determine temperature factors or coordinates.LACBED patterns taken in the (00l) systematic row show an easily recognisable pattern of narrow bands from reflections in the range 15 < l < 40 (figure 1). Integrated intensities obtained from measured intensity profiles after subtraction of inelastic background (figure 2) were used in the least square fit for determination of temperature factors and refinement of z-coordinates for the Ba- and Cu-atoms.


1981 ◽  
Vol 20 (06) ◽  
pp. 274-278
Author(s):  
J. Liniecki ◽  
J. Bialobrzeski ◽  
Ewa Mlodkowska ◽  
M. J. Surma

A concept of a kidney uptake coefficient (UC) of 131I-o-hippurate was developed by analogy from the corresponding kidney clearance of blood plasma in the early period after injection of the hippurate. The UC for each kidney was defined as the count-rate over its ROI at a time shorter than the peak in the renoscintigraphic curve divided by the integral of the count-rate curve over the "blood"-ROI. A procedure for normalization of both curves against each other was also developed. The total kidney clearance of the hippurate was determined from the function of plasma activity concentration vs. time after a single injection; the determinations were made at 5, 10, 15, 20, 30, 45, 60, 75 and 90 min after intravenous administration of 131I-o-hippurate and the best-fit curve was obtained by means of the least-square method. When the UC was related to the absolute value of the clearance a positive linear correlation was found (r = 0.922, ρ > 0.99). Using this regression equation the clearance could be estimated in reverse from the uptake coefficient calculated solely on the basis of the renoscintigraphic curves without blood sampling. The errors of the estimate are compatible with the requirement of a fast appraisal of renal function for purposes of clinical diagknosis.


Sign in / Sign up

Export Citation Format

Share Document