The coil-spring aorta or what makes rabbits go hippity-hop: An angiographic fable

1980 ◽  
Vol 3 (2) ◽  
pp. 135-136 ◽  
Author(s):  
John L. Doppman
Keyword(s):  
Coil Spring

PSEUDOELASTIC BEHAVIOR OF COIL SPRING MADE OF A HIGH-DAMPING Cu-Zn-Al ALLOY

1981 ◽  
Vol 42 (C5) ◽  
pp. C5-1019-C5-1024
Author(s):  
K. Sugimoto ◽  
Y. Nakamura ◽  
L. Delaey
Keyword(s):  
Al Alloy ◽  
Coil Spring ◽  
Pseudoelastic Behavior

FAILURE ANALYSIS OF A COIL SPRING APPLIED IN THE REAR SUSPENSION OF A CITY VEHICLE

2019 ◽  
Author(s):  
Gilmar Cordeiro da Silva ◽  
Marcio Martins ◽  
Caio Silva ◽  
Felipe Bergh ◽  
Pedro Henrique Paiva ◽  
...  
Keyword(s):  
Failure Analysis ◽  
Coil Spring ◽  
Rear Suspension

Optimization of Heavy Duty Three Wheeler Front Suspension Coil Spring Using FEA

2019 ◽  
Author(s):  
Saravanan A ◽  
Suresh P ◽  
Arvidha Balaji S ◽  
Sudharsan G
Keyword(s):  
Coil Spring ◽  
Heavy Duty ◽  
Front Suspension

scholarly journals Passive knee exoskeletons in functional tasks: Biomechanical effects of a SpringExo coil-spring on squats

2021 ◽  
Vol 2 ◽  
Author(s):  
Rand Hidayah ◽  
Dongbao Sui ◽  
Kennedi A. Wade ◽  
Biing-Chwen Chang ◽  
Sunil Agrawal
Keyword(s):  
Outcome Measures ◽  
Muscle Activation ◽  
Rectus Femoris ◽  
Knee Extension ◽  
Lower Limbs ◽  
Flexion Angle ◽  
Coil Spring ◽  
Foot Pressure ◽  
Low Profile ◽  
Muscle Activations

Abstract Passive wearable exoskeletons are desirable as they can provide assistance during user movements while still maintaining a simple and low-profile design. These can be useful in industrial tasks where an ergonomic device could aid in load lifting without inconveniencing them and reducing fatigue and stress in the lower limbs. The SpringExo is a coil-spring design that aids in knee extension. In this paper, we describe the muscle activation of the knee flexors and extensors from seven healthy participants during repeated squats. The outcome measures are the timings of the key events during squat, flexion angle, muscle activation of rectus femoris and bicep femoris, and foot pressure characteristics of the participants. These outcome measures assess the possible effects of the device during lifting operations where reduced effort in the muscles is desired during ascent phase of the squat, without changing the knee and foot kinematics. The results show that the SpringExo significantly decreased rectus femoris activation during ascent (−2%) without significantly affecting either the bicep femoris or rectus femoris muscle activations in descent. This implies that the user could perform a descent without added effort and ascent with reduced effort. The exoskeleton showed other effects on the biomechanics of the user, increasing average squat time (+0.02 s) and maximum squat time (+0.1 s), and decreasing average knee flexion angle (−4°). The exoskeleton has no effect on foot loading or placement, that is, the user did not have to revise their stance while using the device.

scholarly journals Effect of Rail Vehicle–Track Coupled Dynamics on Fatigue Failure of Coil Spring in a Suspension System

2021 ◽  
Vol 11 (6) ◽  
pp. 2650
Author(s):  
Sunil Kumar Sharma ◽  
Rakesh Chandmal Sharma ◽  
Jaesun Lee
Keyword(s):  
Mathematical Model ◽  
Fatigue Fracture ◽  
Suspension System ◽  
Railway Vehicle ◽  
Coil Spring ◽  
Internal Resonances ◽  
Rail Vehicle ◽  
Rail Vehicles ◽  
Stress Result ◽  
Wheel Track

In a rail vehicle, fatigue fracture causes a significant number of failures in the coil spring of the suspension system. In this work, the origin of these failures is examined by studying the rail wheel–track interaction, the modal analysis of the coil springs and the stresses induced during operation. The spring is tested experimentally, and a mathematical model is developed to show its force vs. displacement characteristics. A vertical 10-degree-of-freedom (DOF) mathematical model of a full-scale railway vehicle is developed, showing the motions of the car body, bogies and wheelsets, which are then combined with a track. The springs show internal resonances at nearly 50–60 Hz, where significant stresses are induced in them. From the stress result, the weakest position in the innerspring is identified and a few guidelines are proposed for the reduction of vibration and stress in rail vehicles.

Vibration control of an unbalanced system using a quasi-zero stiffness vibration isolator with fluidic actuators and composite material: An experimental study

2022 ◽  
pp. 107754632110514
Author(s):  
Sivakumar Solaiachari ◽  
Jayakumar Lakshmipathy
Keyword(s):  
Composite Material ◽  
Nonlinear Vibration ◽  
Vibration Isolation ◽  
Basalt Fiber ◽  
Experimental Investigations ◽  
Vibration Isolator ◽  
Coil Spring ◽  
Linear Type ◽  
Fluidic Actuators ◽  
Isolation Performance

In this study, a new type of vibration isolator based on fluidic actuators and a composite slab was tested experimentally with an unbalanced disturbance. Quasi-zero stiffness vibration isolation techniques are advanced and provide effective isolation performance for non-nominal loads. The isolation performance of the proposed isolator was compared to that of a nonlinear vibration isolator equipped with fluidic actuators and a mechanical coil spring (NLVIFA). The NLVIFA system is better suited to non-nominal loads; however, the mechanical spring axial deflection leads to limited amplitude reduction in the system. To address this issue, a cross buckled slab was developed to replace a mechanical coil spring for absorbing vertical deflection by transverse bending, which is made of a specially developed composite material of Basalt fiber reinforced with epoxy resin and enhanced with graphene nano pellets. This current study was concerned with the theoretical analysis and experimental investigations of the proposed nonlinear vibration isolator with fluidic actuators and composite material (NLVIFA-CM), which performs under quasi-zero stiffness characteristics. Because of its reduced axial deflection, the theoretical and experimental results show that the NLVIFA-CM system outperforms the NLVIFA system and other linear type vibration isolators in terms of isolation performance. Furthermore, the proposed vibration isolator makes a significant contribution to low-frequency vibration.

Research and Development of Distributed Multistage TMD for Long Period Structure Using Coil Spring

2013 ◽  
Author(s):  
Osamu Furuya ◽  
Hiroshi Kurabayashi
Keyword(s):  
Low Cost ◽  
Tuned Mass Damper ◽  
Installation Space ◽  
Coil Spring ◽  
Additional Mass ◽  
Natural Period ◽  
Long Period ◽  
Compact Size ◽  
Mass Damper ◽  
And Performance

The response control techniques are mainly divided into two categories. One is a storey installation damper type using a damping element such as oil, elasto-plastic, viscoelastic, and so on. The other is an additional mass damper type such as a active and passive type tuned mass damper including a hybrid type. The device configuration of later damper type becomes larger into high-rise structure and long natural period structure because of increase of additional mass in the same case of mass ratio and necessary design stroke of moving mass. In generally, however, it is desired to be a compact size with a same vibration attenuation performance because of that there is a limitation of installation space for the device, and also it is important to be realize the application of the damper with low cost and with a necessary specification for damper performance. This study has been conducted to develop the passive tuned mass damper system using coil spring for long period structure considering a design indexes such as compact size, low cost and robustness. Although a coil spring has been well used by the tuned mass damper system as one way of solving a cost problem and performance stability, the problem of compact size still remains in case of the application to a long period structure. Multistage type is therefore proposed to the system in this time. Furthermore, the distributed TMD theory is applied to the system for robustness of the system. This paper summarizes from a basic theory to the application of proposed device to the real scale long period structure.

scholarly journals Design & Analysis of Coil Spring using Different Material

2018 ◽  
Vol 5 (12) ◽  
pp. 1-2
Author(s):  
Pravin D ◽  
Adesh B ◽  
Suresh Vellingiri
Keyword(s):  
Design Analysis ◽  
Coil Spring
Sign in / Sign up

Export Citation Format

Share Document