A modified pull-out test and new evaluation methods for a more real local bond-slip relationship

1985 ◽  
Vol 18 (3) ◽  
pp. 181-184 ◽  
Author(s):  
A. Windisch
Keyword(s):  
Evaluation Methods ◽  
Bond Slip ◽  
Pull Out

Bond behaviour of chemically prestressed textile reinforced concrete

2019 ◽  
Author(s):  
Katarzyna Zdanowicz ◽  
Boso Schmidt ◽  
Hubert Naraniecki ◽  
Steffen Marx
Keyword(s):  
Reinforced Concrete ◽  
Bond Strength ◽  
Crack Width ◽  
Research Programme ◽  
Textile Reinforced Concrete ◽  
Self Compacting Concrete ◽  
Bond Behaviour ◽  
Bond Slip ◽  
Laser Sensors ◽  
Pull Out

<p>The bond behaviour of concrete specimens with carbon textile reinforcement was investigated in the presented research programme. Pull-out specimens were cast from self-compacting concrete with expansive admixtures and in this way chemical prestress was introduced. The aim of the research was to compare bond behaviour between prestressed specimens and non-prestressed control specimens. During pull-out tests, the pull-out force and notch opening were measured with a load cell and laser sensors. Further, bond - slip and pull-out force - crack width relationships were drawn and compared for prestressed and non-prestressed specimens. Chemically prestressed specimens reached 24% higher bond strength than non-prestressed ones. It can be therefore concluded, that chemical prestressing positively influences the bond behaviour of concrete with textile reinforcement and thus better utilisation of its properties can be provided.</p>

Bond‐Slip Behavior Between GFRP Bars and Mortar Based on Pull‐Out Tests

2018 ◽  
Vol 40 (7) ◽  
pp. 2840-2849
Author(s):  
Qingping Jin ◽  
Guangbo Wang ◽  
Tingying Liang ◽  
Peixia Chen
Keyword(s):  
Bond Slip ◽  
Gfrp Bars ◽  
Pull Out

Bond behavior of high strength concrete under reversed pull-out cyclic loading

2002 ◽  
Vol 29 (2) ◽  
pp. 191-200 ◽  
Author(s):  
M Alavi-Fard ◽  
H Marzouk
Keyword(s):  
Cyclic Loading ◽  
Bond Strength ◽  
High Strength Concrete ◽  
Concrete Strength ◽  
High Strength ◽  
Displacement Curve ◽  
Bond Slip ◽  
Strength Concrete ◽  
Pull Out ◽  
Normal Strength

Structures located in seismic zones require significant ductility. It is necessary to examine the bond slip characteristics of high strength concrete under cyclic loading. The cyclic bond of high strength concrete is investigated under different parameters, including load history, confining reinforcement, bar diameter, concrete strength, and the rate of pull out. The bond strength, cracking, and deformation are highly dependent on the bond slip behavior between the rebar and the concrete under cyclic loading. The results of cyclic testing indicate that an increase in cyclic displacement will lead to more severe bond damage. The slope of the bond stress – displacement curve can describe the influence of the rate of loading on the bond strength in a cyclic test. Specimens with steel confinement sustained a greater number of cycles than the specimens without steel confinement. It has been found that the maximum bond strength increases with an increase in concrete strength. Cyclic loading does not affect the bond strength of high strength concrete as long as the cyclic slip is less than the maximum slip for monotonic loading. The behavior of high strength concrete under a cyclic load is slightly different from that of normal strength concrete.Key words: bond, high strength, cyclic loading, bar spacing, loading rate, failure mechanism.

Bond of Steel Bars to Masonry Mortar Joints: Test Results and Analytical Modelling

2017 ◽  
Vol 747 ◽  
pp. 319-325 ◽  
Author(s):  
Matteo Maragna ◽  
Cristina Gentilini ◽  
Giovanni Castellazzi ◽  
Christian Carloni
Keyword(s):  
High Strength ◽  
Experimental Tests ◽  
Analytical Investigation ◽  
Masonry Walls ◽  
Test Results ◽  
Bond Slip ◽  
Pull Out ◽  
Steel Bars ◽  
Masonry Mortar

In this paper, the preliminary results of a series of pull-out tests conducted on mortar cylinders with embedded bars are presented. The bars are made of high strength stainless steel and are of helical shape to increase mechanical interlocking with the surrounding mortar. Usually, such bars are employed in situ to realize structural repointing in the case of fair-faced masonry walls. To this aim, they are inserted in the mortar bed joints of masonry for providing tensile strength to the walls and with the function of crack stitching. The aim of the present experimental tests is to determine the bond-slip relationship for bars embedded in masonry. Firstly, pull-out tests are conducted on mortar cylinders considering different embedded lengths of the bars. Further tests are on-going on masonry specimens with bars embedded in the mortar joints. An analytical investigation is also carried out for the interpretation of the pull-out test results.

scholarly journals Finite element modelling of monotonic pull-out test of deformed steel rebar embedded in well-confined concrete

2021 ◽  
Vol 331 ◽  
pp. 05012
Author(s):  
Patria Kusumaningrum ◽  
Gigih Muslim Prayogo ◽  
Sri Tudjono
Keyword(s):  
Finite Element ◽  
Finite Element Modelling ◽  
Empirical Equation ◽  
Bond Stress ◽  
Confined Concrete ◽  
Bond Slip ◽  
Steel Rebar ◽  
Bond Model ◽  
Pull Out ◽  
Good Agreement

A finite element study carried out using LS DYNA and aimed to simulate the monotonic pull-out test of deformed steel rebar embedded in concrete is presented in this paper. Three models of the interface between deformed steel rebar and well-confined concrete, i.e. perfect bond model and two bond-slip models are observed and compared. Bond stress-slip response and rebar stress-slip response obtained numerically are validated with experimental data and empirical equations available from the literature. The full bond model overestimates the response, providing higher rebar stress. In the bond-slip models, good agreement is observed between numerical and experimental bond stress and rebar Stress–slip responses. The empirical equation of bond-slip proposed by Murcia-Delso and Shing (2014) is found to overestimate the peak bond stress.

scholarly journals Bond-Slip Models for FPR-Concrete Interfaces Subjected to Moisture Conditions

2017 ◽  
Vol 2017 ◽  
pp. 1-14 ◽  
Author(s):  
Justin Shrestha ◽  
Dawei Zhang ◽  
Tamon Ueda
Keyword(s):  
Fiber Reinforced Polymers ◽  
Experimental Investigations ◽  
Reinforced Polymers ◽  
Bond Slip ◽  
Exposure Effect ◽  
Pull Out ◽  
Proposed Model ◽  
Maximum Period ◽  
Moisture Conditions

Environmental related durability issues have been of great concerns in the structures strengthened with the fiber reinforced polymers (FRPs). In marine environment, moisture is one of the dominant factors that adversely affect the material properties and the bond interfaces. Several short-term and long-term laboratory experimental investigations have been conducted to study such behaviors but, still, there are insufficient constitutive bond models which could incorporate moisture exposure conditions. This paper proposed a very simple approach in determining the nonlinear bond-slip models for the FRP-concrete interface considering the effect of moisture conditions. The proposed models are based on the strain results of the experimental investigation conducted by the authors using 6 different commercial FRP systems exposed to the moisture conditions for the maximum period of 18 months. The exposure effect in the moisture conditions seems to have great dependency on the FRP system. Based on the contrasting differences in the results under moisture conditions, separate bond-slip models have been proposed for the wet-layup FRP and prefabricated FRP systems. As for the verification of the proposed model under moisture conditions, predicted pull-out load was compared with the experimental pull-out load. The results showed good agreement for all the FRP systems under investigation.

scholarly journals Characterization and Simulation of the Bond Response of NSM FRP Reinforcement in Concrete

Materials ◽  
2020 ◽  
Vol 13 (7) ◽  
pp. 1770 ◽  
Author(s):  
Javier Gómez ◽  
Lluís Torres ◽  
Cristina Barris
Keyword(s):  
Load Capacity ◽  
Numerical Procedure ◽  
Fiber Reinforced Polymer ◽  
Near Surface ◽  
Bond Slip ◽  
Pull Out ◽  
Reinforced Polymer ◽  
Frp Reinforcement ◽  
Near Surface Mounted ◽  
Shear Stress And Strain

The near-surface mounted (NSM) technique with fiber reinforced polymer (FRP) reinforcement as strengthening system for concrete structures has been broadly studied during the last years. The efficiency of the NSM FRP-to-concrete joint highly depends on the bond between both materials, which is characterized by a local bond–slip law. This paper studies the effect of the shape of the local bond–slip law and its parameters on the global response of the NSM FRP joint in terms of load capacity, effective bond length, slip, shear stress, and strain distribution along the bonded length, which are essential parameters on the strengthening design. A numerical procedure based on the finite difference method to solve the governing equations of the FRP-to-concrete joint is developed. Pull-out single shear specimens are tested in order to experimentally validate the numerical results. Finally, a parametric study is performed. The effect of the bond–shear strength slip at the bond strength, maximum slip, and friction branch on the parameters previously described is presented and discussed.

Bond Properties of Plain Steel Bar in Concrete with Machine-Made Sand

2013 ◽  
Vol 438-439 ◽  
pp. 20-24
Author(s):  
Feng Lan Li ◽  
Ke Fei Yu ◽  
Xin Xin Ding ◽  
Chang Ming Li
Keyword(s):  
Bond Strength ◽  
Experimental Studies ◽  
Bond Stress ◽  
Test Method ◽  
Bond Properties ◽  
Bond Slip ◽  
Ordinary Concrete ◽  
Strength Grade ◽  
Pull Out ◽  
Steel Bar

To meet the requirement of machine-made sand application in concrete structures, it is necessary to understand the bond properties of steel bar with machine-made sand concrete (MSC). Therefore, the experimental studies were carried out on the bond of plain steel bar with MSC by the central pull-out test method. Three specimens were cast as one group, 6 groups were tested considering the changes of strength grade of MSC and ordinary concrete. The bond-slip curves were measured and analyzed. The results show that the bond slip begins at the tensile side and transfers gradually to the free end before the entire slip turns up along the interface of plain steel bar and surrounded concrete, the largest average bond stress, i. e. the bond strength of plain steel bar corresponds to the initial entire slip of plain steel bar. With the increasing strength grade of MSC and ordinary concrete, the difference of slip at tensile side and free end becomes greater. Comparing that only appears in ordinary concrete with higher strength, the larger slips turn up while the bond stress reaches the largest for the plain steel bar in MSC. Larger scatter of bond strength is between specimens in the same group. Some plain steel bars yields with the beginning of entire slip along the interface.

Sign in / Sign up

Export Citation Format

Share Document