Mixed-mode crack-tip deformations studied using a modified flexural specimen and coherent gradient sensing

1993 ◽  
Vol 33 (3) ◽  
pp. 218-227 ◽  
Author(s):  
S. Ramaswamy ◽  
H. V. Tippur ◽  
L. Xu
Keyword(s):  
Mixed Mode ◽  
Crack Tip ◽  
Gradient Sensing ◽  
Coherent Gradient Sensing ◽  
Mixed Mode Crack

The Area Fracture Criterion of Iso-εθ Line for Mixed Mode Crack

2012 ◽  
Vol 193-194 ◽  
pp. 708-711
Author(s):  
Si Li Chen ◽  
Tao Yu ◽  
Jian Jun Shi ◽  
Jie Huang ◽  
Kai He Dong
Keyword(s):  
Crack Initiation ◽  
Mixed Mode ◽  
Fracture Criterion ◽  
Shape Change ◽  
Crack Tip ◽  
Fracture Line ◽  
Mixed Mode Crack ◽  
Engineering Significance ◽  
Crack Initiation Angle ◽  
Predicted Values

In practice, the crack in some engineering materials is often compound crack. Therefore, it is important engineering significance to study on fracture problem. Based on the shape change energy near crack tip portion, the area fracture criterion of Iso-εθ line for compound crack was proposed. A crack initiation angle formula and the fracture criterion were established. The results showed that the theoretical predicted values and the measured values are consistent. The compound crack fracture line area of fracture criterion was established.Tthe formulas are easy to be derived and convenient to apply.

scholarly journals Mixed-mode crack tip fields in a polycrystalline aluminum alloy

2019 ◽  
Vol 300 ◽  
pp. 11004 ◽  
Author(s):  
Marcel Wicke ◽  
Angelika Brueckner-Foit
Keyword(s):  
Mixed Mode ◽  
Crack Tip ◽  
Strain Partitioning ◽  
Crack Tip Field ◽  
Polycrystalline Aluminum ◽  
Digital Twin ◽  
Crack Tip Fields ◽  
Mixed Mode Crack ◽  
Threshold Regime ◽  
Near Threshold

Carefully performed experiments with long cracks in the near-threshold regime have shown that the crack tip field of these cracks significantly deviate from the expected mode-I butterfly-shaped ones and resemble strongly to mixed-mode crack tip fields. A simulation study using a crystal plasticity (CP) approach has been utilized in order to understand this phenomenon. To this end, a digital twin of an aluminum sample fatigued in the near-threshold regime was generated with the help of electron backscatter diffraction (EBSD) and X-ray tomography. Once set-up, the digital twin was loaded in uniaxial tension using the fast spectral solver implemented in the Düsseldorf Advanced Material Simulation Kit (DAMASK). The versatility of this experimental-computational approach for studying the strain partitioning at the crack tip is demonstrated in this work.

The Elastic-Viscoplastic Field at the Mixed-Mode Crack-Tip under Compression and Shear

2008 ◽  
Vol 385-387 ◽  
pp. 321-324
Author(s):  
Wen Yan Liang ◽  
Zhen Qing Wang ◽  
Bo Zhou ◽  
Hong Qing Lv
Keyword(s):  
Numerical Solution ◽  
Mixed Mode ◽  
Equivalent Plastic Strain ◽  
Crack Tip ◽  
Viscosity Coefficient ◽  
Plastic Strain Rate ◽  
Crack Tip Field ◽  
Viscosity Effect ◽  
Mixed Mode Crack ◽  
Propagating Crack

Under the assumption that the viscosity coefficient is in inverse proportion to the power law of the equivalent plastic strain rate. The friction touch effect between viscosity and crack-tip surfaces is considered, the asymptotic solution is established for elastic-viscoplastic field at the mixed-mode quasi static crack-tip under compression and shear. The numerical solution at crack-tip without stress and stain gap is obtained. The variation of numerical solution is discussed for the mixed-mode under compression and shear according to each parameter. Through numerical results and analysis for the mixed-mode crack-tip field under compressing and shear, it is whole plastic without elastic unloaded section, viscosity effect is an important factor when propagating crack-tip field.

Sign in / Sign up

Export Citation Format

Share Document