Strain gages measure mandibular-arch movements

1970 ◽  
Vol 10 (10) ◽  
pp. 27N-27N
Author(s):  
James G. Burch
Keyword(s):  
1982 ◽  
Vol 10 (1) ◽  
pp. 37-54 ◽  
Author(s):  
M. Kumar ◽  
C. W. Bert

Abstract Unidirectional cord-rubber specimens in the form of tensile coupons and sandwich beams were used. Using specimens with the cords oriented at 0°, 45°, and 90° to the loading direction and appropriate data reduction, we were able to obtain complete characterization for the in-plane stress-strain response of single-ply, unidirectional cord-rubber composites. All strains were measured by means of liquid mercury strain gages, for which the nonlinear strain response characteristic was obtained by calibration. Stress-strain data were obtained for the cases of both cord tension and cord compression. Materials investigated were aramid-rubber, polyester-rubber, and steel-rubber.


Author(s):  
Nasreen Iqbal Nagani

Background: Retention is an integral phase in which teeth are maintained in their newly adapted position for which retainers are inserted. Retainers are generally of two types: removable and fixed. Fixed retainers are indicated in the mandibular arch for an indefinite period specifically in the non-extraction cases. Changes in intercanine and intermolar widths are valuable parameters to evaluate the stability. The objectives of this study were to assess and compare the mandibular intercanine and intermolar width changes following orthodontic treatment after insertion of two types of fixed lingual retainers for one year. Methods: Total 54 subjects were recruited in which two types of fixed lingual retainers were inserted in the mandibular arch randomly. Intercanine and intermolar arch widths were measured by digital caliper of 0.01 mm accuracy. Data was analyzed by using Statistical Package of Social Sciences (SPSS V-21). Chi-square and independent t tests were used to compare baseline characteristics. Intercanine and intermolar widths were assessed and compared using independent t test, p-value ≤ 0.05 is considered as statistically significant. Results: Intercanine width increased from baseline to T4 in both retainers. When mean differences of intercanine width were compared between two retainers significant differences were observed at T1, T2, T3 and T4 with significant p-values (< 0.05) and increased intercanine width with multistranded stainless steel wire (MSW) retainers. Conclusion: Mandibular intercanine width increases significantly in post retention phase with multistranded stainless steel retainers. Thus, fiber reinforced composite retainers are more effective in preserving the arch width changes.


2013 ◽  
Vol 57 (5) ◽  
pp. 399-406 ◽  
Author(s):  
Kazuya Fujita ◽  
Yuji Taya ◽  
Yoshihito Shimazu ◽  
Takaaki Aoba ◽  
Yuuichi Soeno

1967 ◽  
Vol 89 (3) ◽  
pp. 333-338 ◽  
Author(s):  
F. J. Witt ◽  
R. C. Gwaltney ◽  
R. L. Maxwell ◽  
R. W. Holland

A series of steel models having single nozzles radially and nonradially attached to a spherical shell is presently being examined by means of strain gages. Parameters being studied are nozzle dimensions, length of internal nozzle protrusions, and angles of attachment. The loads are internal pressure and axial thrust and moment loadings on the nozzle. This paper presents both experimental and theoretical results from six of the configurations having radially attached nozzles for which the sphere dimensions are equal and the outside diameter of the attached nozzle is constant. In some instances the nozzle protrudes through the vessel.


Author(s):  
Young-Kyun Kim ◽  
So-Hyun Kim ◽  
Tae-Hyun Choi ◽  
Edwin H. Yen ◽  
Bingshuang Zou ◽  
...  

Abstract Objectives The purpose of this retrospective study was to evaluate the accuracy of intraoral scan (IOS) images in the maxillary and mandibular arches with orthodontic brackets. Material and methods From digital impressions of 140 patients who underwent orthodontic treatment, consecutive IOS images were selected based on standardized inclusion criteria: Two pre-orthodontic IOS images (IOS1 and IOS2) of permanent dentition with fully erupted second molars and IOS images obtained immediately after orthodontic bracket bonding (IOSb). Superimpositions were performed to evaluate the reproducibility of repeated IOS images. Accuracy of IOSb images was analyzed by comparing the average surface errors between IOS1c and IOS2c images, which were IOS images cut based on the same region of the interest as between IOS1 and IOSb images. Results A total of 84 IOS images was analyzed. The average surface errors between IOS1 and IOS2 images were 57 ± 8 μm and 59 ± 14 μm in the maxillary and mandibular arch, respectively, and their reliability was almost perfect. The average errors between IOSb and IOS1c images exhibited an increase, which measured 97 ± 28 μm in the maxillary arch and 95 ± 29 μm in the mandibular arch. These surface deviations between IOSb and IOS1c images were significantly larger in each region as well as entire dentition (P < 0.001) compared to those between IOS1c and IOS2c images. Conclusions The average surface errors of the scans with brackets showed increased values compared with those without brackets. This suggests that orthodontic brackets could affect the trueness of intraoral scan images. Clinical relevance It is necessary for clinicians to consider the effect of brackets on digital impression when using IOS images in orthodontic patients.


Author(s):  
Christine Hirschberger ◽  
Victoria A Sleight ◽  
Katharine E Criswell ◽  
Stephen J Clark ◽  
J Andrew Gillis

Abstract The origin of the jaw is a long-standing problem in vertebrate evolutionary biology. Classical hypotheses of serial homology propose that the upper and lower jaw evolved through modifications of dorsal and ventral gill arch skeletal elements, respectively. If the jaw and gill arches are derived members of a primitive branchial series, we predict that they would share common developmental patterning mechanisms. Using candidate and RNAseq/differential gene expression analyses, we find broad conservation of dorsoventral patterning mechanisms within the developing mandibular, hyoid and gill arches of a cartilaginous fish, the skate (Leucoraja erinacea). Shared features include expression of genes encoding members of the ventralising BMP and endothelin signalling pathways and their effectors, the joint markers nkx3.2 and gdf5 and pro-chondrogenic transcription factor barx1, and the dorsal territory marker pou3f3. Additionally, we find that mesenchymal expression of eya1/six1 is an ancestral feature of the mandibular arch of jawed vertebrates, while differences in notch signalling distinguish the mandibular and gill arches in skate. Comparative transcriptomic analyses of mandibular and gill arch tissues reveal additional genes differentially expressed along the dorsoventral axis of the pharyngeal arches, including scamp5 as a novel marker of the dorsal mandibular arch, as well as distinct transcriptional features of mandibular and gill arch muscle progenitors and developing gill buds. Taken together, our findings reveal conserved patterning mechanisms in the pharyngeal arches of jawed vertebrates, consistent with serial homology of their skeletal derivatives, as well as unique transcriptional features that may underpin distinct jaw and gill arch morphologies.


1987 ◽  
Vol 109 (4) ◽  
pp. 362-369 ◽  
Author(s):  
D. J. Meierhofer ◽  
K. A. Stelson

A new method to measure the frictional stresses and normal pressure in the roll gap during cold rolling, and experimental verification of this new method, are presented. The method overcomes many of the shortcomings of pin-type sensors. The elastic deformation of the roll itself is measured with strain gages, and is used to calculate the stresses between the sheet and the roll. Since no modification of the roll is necessary, the deformation process is undisturbed by the measurement. Mechanical isolation of the sensor is unnecessary. The mathematical procedure used to calculate the normal pressure and frictional stresses from the measured strains explicitly acknowledges that these strains are the result of the entire distribution of pressures and shears in the roll gap. An experimental rolling mill was constructed to verify the proposed method. Lead was rolled, and the resulting pressure and frictional stress distributions in the roll gap were measured. Several features of these distributions are in agreement with measurements made by various investigators using other techniques, thereby confirming the usefulness of the new method. Future work is proposed to increase the accuracy with which the roll gap stresses may be measured.


Author(s):  
Tanja Niemelä ◽  
Markku Leppänen ◽  
Minna Päivinen ◽  
Markku Mattila

During the Eurohandtool Project an experimental testing system for non-powered hand tools was developed for laboratory testing. With this system, it is possible to measure simultaneously (1) the EMG activity of two muscles, (2) the opening angle of hand tool blades by means of a potentiometer and, (3) by means of strain gages, the force transmitted to the handle. The first part of evaluation of the system was to determine its time of warming-up, reliability, linearity and repeatability. This paper concentrates on the second part, during which the aim was to test the measurement system by comparing the forces needed to cut wood of a certain diameter, and the actual force required, as measured by a material-testing system. The correlation between forearm flexor muscle activity and the compression force created by the user was investigated. The evaluation of experimental testing system for non-powered hand tools has shown that there are methods to measure force demand, opening angle and EMG-activity simultaneously. However, it is recommended to make some improvements before this measurement system can be taken into widespread use.


1994 ◽  
Vol 116 (1) ◽  
pp. 248-256 ◽  
Author(s):  
C. Chassapis ◽  
G. G. Lowen

An experimentally verified simulation of the elastic-dynamic behavior of a lever-type feed mechanism is presented. Based on a combination of experimental and analytical findings, simplified motion equations could be introduced. In the experimental set-up, the motion of the mechanism is monitored by three angular encoders, which are attached to the drive shaft, the rocker-link shaft, and the feed roller shaft, respectively. Their output, which is stored in a specially designed data acquisition system, allows the correlation of the instantaneous rotations of the feed roller and the rocker shafts to that of the drive shaft. Strain gages provide in and out-of-plane bending-strain histories of the bent coupler. Experiment and theory, for different loading conditions, are correlated by way of the coupler strain, the clutch windup angle and the total feed length. Good qualitative and quantitative agreement between computed and experimental results was found.


Sign in / Sign up

Export Citation Format

Share Document