Analytical study of supersonic isentropic flow in a channel of constant cross section and an adjacent laval nozzle. Comparison with numerical and experimental results

1994 ◽  
Vol 29 (4) ◽  
pp. 567-576 ◽  
Author(s):  
U. G. Pirumov
Keyword(s):  
Cross Section ◽  
Analytical Study ◽  
Laval Nozzle ◽  
Experimental Results ◽  
Constant Cross Section ◽  
Isentropic Flow

Berechnungen zur isentropen Entspannung eines Argon-Plasmas in einer Laval-Düse

1965 ◽  
Vol 20 (8) ◽  
pp. 1027-1030 ◽  
Author(s):  
J. Artmann
Keyword(s):  
Thermodynamic Equilibrium ◽  
Laval Nozzle ◽  
Experimental Results ◽  
Simplified Model ◽  
Plasma Parameters ◽  
Argon Plasmas ◽  
Isentropic Flow

Neglecting magnetic and electric forces which occure in the expansion of a plasma in a LAVAL nozzle the plasma parameters are calculated by means of a simplified model 3 under the condition of isentropic flow. An Ein-Stufen-Modell and a Zwei-Stufen-Modell 1 is applied. It proves that the experimental results at hand can only be explained by means of the Zwei-Stufen-Modell. The calculations include the case of thermodynamic equilibrium as well as that of frozen flow.

Effects of openings on the seismic behavior and performance level of concrete shear walls

2019 ◽  
Author(s):  
Hossein Alimohammadi ◽  
Mostafa Dalvi Esfahani ◽  
Mohammadali Lotfollahi Yaghin
Keyword(s):  
Static Analysis ◽  
Cross Section ◽  
Seismic Behavior ◽  
Shear Walls ◽  
Shear Wall ◽  
Constant Cross Section ◽  
Added Resistance ◽  
Different Shapes ◽  
And Performance ◽  
Abaqus Software

In this study, the seismic behavior of the concrete shear wall considering the opening with different shapes and constant cross-section has been studied, and for this purpose, several shear walls are placed under the increasingly non-linear static analysis (Pushover). These case studies modeled in 3D Abaqus Software, and the results of the ductility coefficient, hardness, energy absorption, added resistance, the final shape, and the final resistance are compared to shear walls without opening.

An improved de Laval nozzle experiment

2021 ◽  
pp. 030641902110341
Author(s):  
Nicholas Goodman ◽  
Brian J Leege ◽  
Peter E Johnson
Keyword(s):  
Data Acquisition ◽  
Laval Nozzle ◽  
Flow Characteristics ◽  
Data Acquisition System ◽  
Isentropic Flow ◽  
Hands On ◽  
De Laval Nozzle ◽  
Physical Phenomena ◽  
The Impact ◽  
The Relationship

Exposing students to hands-on experiments has been a common approach to illustrating complex physical phenomena that have been otherwise modelled solely mathematically. Compressible, isentropic flow in a duct is an example of such a phenomenon, and it is often demonstrated via a de Laval nozzle experiment. We have improved an existing converging/diverging nozzle experiment so that students can modify the location of the normal shock that develops in the diverging portion to better understand the relationship between the shock and the pressure. We have also improved the data acquisition system for this experiment and explained how visualisation of the standing shock is now possible. The results of the updated system demonstrate that the accuracy of the isentropic flow characteristics has not been lost. Through pre- and post-laboratory quizzes, we show the impact on student learning as well.

The influence of the nuclear and atomic form factors on the muon bremsstrahlung cross section

1968 ◽  
Vol 46 (10) ◽  
pp. S377-S380 ◽  
Author(s):  
A. A. Petrukhin ◽  
V. V. Shestakov
Keyword(s):  
Form Factor ◽  
Cross Section ◽  
Born Approximation ◽  
Form Factors ◽  
Experimental Results ◽  
Simple Analytical Expression ◽  
Nuclear Form Factor ◽  
The Cross ◽  
Atomic Electrons ◽  
Bremsstrahlung Process

The cross section for the muon bremsstrahlung process is calculated as a function of the nuclear form factor in the Born approximation following the Bethe and Heitler theory. The influence of the nuclear form factor is greater than that taken by Christy and Kusaka. The simple analytical expression for the effect of the screening of the atomic electrons is found. The influence of a decrease in the cross section upon the interpretation of some experimental results is estimated.

Condensation in a Variable Acceleration Field and the Condensing Thermosyphon

1965 ◽  
Vol 87 (4) ◽  
pp. 355-360 ◽  
Author(s):  
J. C. Chato
Keyword(s):  
Heat Transfer ◽  
Cross Section ◽  
Radial Distance ◽  
Constant Cross Section ◽  
Linear Variation ◽  
Temperature Differential ◽  
Acceleration Field ◽  
Nusselt Numbers ◽  
Increasing Temperature ◽  
Limiting Values

The general problem of condensation in a variable acceleration field was investigated analytically. The case of the linear variation, which occurs in a constant cross section, rotating thermosyphon, was treated in detail. The results show that the condensate thickness and Nusselt numbers approach limiting values as the radial distance increases. The effects of the temperature differential and the Prandtl number are similar to those in other condensation problems; i.e., the heat transfer increases slightly with increasing temperature differential if Pr > 1, but it decreases with increasing temperature differential if Pr ≪ 1.

Turbulent buoyant convection from a source in a confined region

1969 ◽  
Vol 37 (1) ◽  
pp. 51-80 ◽  
Author(s):  
W. D. Baines ◽  
J. S. Turner
Keyword(s):  
Point Source ◽  
Cross Section ◽  
Laboratory Experiments ◽  
Region Of Interest ◽  
Constant Cross Section ◽  
General Shape ◽  
Turbulent Environment ◽  
Starting Conditions ◽  
Upward Velocity ◽  
Local Mean

This paper considers the effect of continuous convection from small sources of buoyancy on the properties of the environment when the region of interest is bounded. The main assumptions are that the entrainment into the turbulent buoyant region is at a rate proportional to the local mean upward velocity, and that the buoyant elements spread out at the top of the region and become part of the non-turbulent environment at that level. Asymptotic solutions, valid at large times, are obtained for the cases of plumes from point and line sources and also periodically released thermals. These all have the properties that the environment is stably stratified, with the density profile fixed in shape, changing at a uniform rate in time at all levels, and everywhere descending (with ascending buoyant elements).The analysis is carried out in detail for the point source in an environment of constant cross-section. Laboratory experiments have been conducted for this case, and these verify the major predictions of the theory. It is then shown how the method can be extended to include more realistic starting conditions for the convection, and a general shape of bounded environment. Finally, the model is applied quantitatively to a variety of problems in engineering, the atmosphere and the ocean, and the limitations on its use are discussed.

The Use of Strain Energy and Fracture Correlation to Determine Life Expectancy for Notched Components

2009 ◽  
Author(s):  
Onome Scott-Emuakpor ◽  
Tommy George ◽  
Charles Cross ◽  
M.-H. Herman Shen
Keyword(s):  
Fatigue Life ◽  
Stress Concentration ◽  
Cross Section ◽  
Strain Energy ◽  
Notch Root ◽  
Stress Gradient ◽  
Strain Curve ◽  
Experimental Results ◽  
Cyclic Process ◽  
Notched Components

An energy-based method for predicting fatigue life of half-circle notched specimens, based on the nominal applied stress amplitude, has been developed. This developed method is based on the understanding that the total strain energy dissipated during a monotonic fracture and a cyclic process is the same material property, where the density of each can be determined by measuring the area underneath the monotonic true stress-strain curve and measuring the sum of the area within each Hysteresis loop in the cyclic process, respectively. Using this understanding, the criterion for determining fatigue life prediction of half-circle notched components is constructed by incorporating the stress gradient effect through the notch root cross-section. Though fatigue at a notch root is a local phenomenon, evaluation of the stress gradient through the notch root cross-section is essential for incorporating this method into finite element analysis minimum potential energy process. The validation of this method was carried out by comparison with both notched and unnnotched experimental fatigue life of Aluminum 6061-T6 (Al 6061-T6) specimens under tension/compression loading at the theoretical notch fatigue stress concentration factor of 1.75. The comparison initially showed a slight deviation between prediction and experimental results. This led to the analysis of strain energy density per cycle up to failure, and an improved Hysteresis representation for the energy-based prediction analysis. With the newly developed Hysteresis representation, the energy-based prediction comparison shows encouraging agreement with unnotched experimental results and a theoretical notch stress concentration value.

Stresses in compact end closures for cylindrical pressure vessels

1969 ◽  
Vol 4 (1) ◽  
pp. 57-64
Author(s):  
R W T Preater
Keyword(s):  
Cylindrical Shell ◽  
Rigid Body ◽  
Optimum Design ◽  
Cross Section ◽  
Experimental Verification ◽  
Pressure Vessels ◽  
Rigid Body Motion ◽  
Experimental Results ◽  
Body Motion ◽  
Annular Ring

Three different assumptions are made for the behaviour of the junction between the cylindrical shell and the end closure. Comparisons of analytical and experimental results show that the inclusion of a ‘rigid’ annular ring beam at the junction of the cylider and the closure best represents the shell behaviour for a ratio of cylinder mean radius to thickness of 3–7, and enables a prediction of an optimum vessel configuration to be made. Experimental verification of this optimum design confirms the predictions. (The special use of the term ‘rigid’ is taken in this context to refer to a ring beam for which deformations of the cross-section are ignored but rigid body motion is permitted.)

Sign in / Sign up

Export Citation Format

Share Document