One method for predicting critical stresses for reinforced cylindrical shells subject to axial compression

1996 ◽  
Vol 32 (7) ◽  
pp. 537-539 ◽  
Author(s):  
V. A. Zarutskii ◽  
V. F. Sivak
Keyword(s):  
Axial Compression ◽  
Cylindrical Shells ◽  
Critical Stresses

scholarly journals Buckling and post-buckling behaviour of shallow – nearly flat cylindrical panels under axial compression

2016 ◽  
Vol 64 (3) ◽  
pp. 655-658 ◽  
Author(s):  
E. Magnucka-Blandzi ◽  
K. Magnucki
Keyword(s):  
Differential Equations ◽  
Axial Compression ◽  
Nonlinear Theory ◽  
Cylindrical Shells ◽  
Critical Stresses ◽  
Cylindrical Panels ◽  
Post Buckling ◽  
Range Of Values

Abstract The paper is devoted to buckling problem of axially compressed shallow cylindrical panels. Governing differential equations of the nonlinear theory of shallow cylindrical shells are analytically solved. Critical stresses and equilibrium paths of the panels with small curvatures are analytically studied. The formula of the critical stresses for almost flat, cylindrical panels is derived. The “shallowness” of the panel is given by the parameter α and formulae are derived for a range of this parameter. The range of values of sectorial angle for these panels is also defined.

Influence of rib eccentricity on the critical stresses in axial compression of cylindrical shells

1974 ◽  
Vol 10 (12) ◽  
pp. 1294-1299
Author(s):  
I. Ya. Amiro ◽  
V. A. Zarutskii ◽  
I. F. Larionov ◽  
V. I. Matsner ◽  
P. I. Nikitin ◽  
...  
Keyword(s):  
Axial Compression ◽  
Cylindrical Shells ◽  
Critical Stresses

Buckling of Circular Cylindrical Shells Using a Displacement Function

1974 ◽  
Vol 96 (4) ◽  
pp. 1322-1327
Author(s):  
Shun Cheng ◽  
C. K. Chang
Keyword(s):  
Boundary Conditions ◽  
Axial Compression ◽  
Cylindrical Shells ◽  
External Pressure ◽  
Displacement Function ◽  
Combined Loading ◽  
Trial Solution ◽  
Governing Differential Equation ◽  
Circular Cylindrical Shells ◽  
The Stability

The buckling problem of circular cylindrical shells under axial compression, external pressure, and torsion is investigated using a displacement function φ. A governing differential equation for the stability of thin cylindrical shells under combined loading of axial compression, external pressure, and torsion is derived. A method for the solutions of this equation is also presented. The advantage in using the present equation over the customary three differential equations for displacements is that only one trial solution is needed in solving the buckling problems as shown in the paper. Four possible combinations of boundary conditions for a simply supported edge are treated. The case of a cylinder under axial compression is carried out in detail. For two types of simple supported boundary conditions, SS1 and SS2, the minimum critical axial buckling stress is found to be 43.5 percent of the well-known classical value Eh/R3(1−ν2) against the 50 percent of the classical value presently known.

RELIABILITY ASSESSMENT OF AXIALLY COMPRESSED COMPOSITE CYLINDRICAL SHELLS WITH RANDOM IMPERFECTIONS

2011 ◽  
Vol 11 (02) ◽  
pp. 215-236 ◽  
Author(s):  
MATTEO BROGGI ◽  
ADRIANO CALVI ◽  
GERHART I. SCHUËLLER
Keyword(s):  
Mathematical Models ◽  
Axial Compression ◽  
Cylindrical Shells ◽  
Reliability Assessment ◽  
Buckling Analysis ◽  
Buckling Load ◽  
Experimental Results ◽  
Drastic Decrease ◽  
Different Types ◽  
Probability And Statistics

Cylindrical shells under axial compression are susceptible to buckling and hence require the development of enhanced underlying mathematical models in order to accurately predict the buckling load. Imperfections of the geometry of the cylinders may cause a drastic decrease of the buckling load and give rise to the need of advanced techniques in order to consider these imperfections in a buckling analysis. A deterministic buckling analysis is based on the use of the so-called knockdown factors, which specifies the reduction of the buckling load of the perfect shell in order to account for the inherent uncertainties in the geometry. In this paper, it is shown that these knockdown factors are overly conservative and that the fields of probability and statistics provide a mathematical vehicle for realistically modeling the imperfections. Furthermore, the influence of different types of imperfection on the buckling load are examined and validated with experimental results.

Buckling behaviors of thin-walled cylindrical shells under localized axial compression loads, Part 1: Experimental study

2021 ◽  
Vol 166 ◽  
pp. 108118
Author(s):  
Peng Jiao ◽  
Zhiping Chen ◽  
He Ma ◽  
Peng Ge ◽  
Yanan Gu ◽  
...  
Keyword(s):  
Experimental Study ◽  
Axial Compression ◽  
Cylindrical Shells ◽  
Thin Walled
Sign in / Sign up

Export Citation Format

Share Document