scholarly journals Effects of second-approximation of boundary layer theory in three-dimensional flow over bodies with a large aspect ratio at small angles of incidence

1995 ◽  
Vol 30 (2) ◽  
pp. 204-209
Author(s):  
E. A. Lipchinskii ◽  
G. A. Tirskii ◽  
S. V. Utyuzhnikov
Keyword(s):  
Boundary Layer ◽  
Aspect Ratio ◽  
Three Dimensional ◽  
Boundary Layer Theory ◽  
Large Aspect Ratio ◽  
Three Dimensional Flow ◽  
Dimensional Flow

scholarly journals Experimental observation of frequency lock-in of roughness-induced instabilities in a laminar boundary layer

2019 ◽  
Vol 870 ◽  
pp. 680-697
Author(s):  
Dominik K. Puckert ◽  
Ulrich Rist
Keyword(s):  
Boundary Layer ◽  
Aspect Ratio ◽  
Laminar Boundary Layer ◽  
Roughness Element ◽  
Water Channel ◽  
Three Dimensional ◽  
Boundary Layer Theory ◽  
Linear Stability Theory ◽  
Mode Decomposition ◽  
Lock In

The interaction of disturbance modes behind an isolated cylindrical roughness element in a laminar boundary layer is investigated by means of hot-film anemometry and particle image velocimetry in a low-turbulence laminar water channel. Both sinuous and varicose disturbance modes are found in the wake of a roughness with unit aspect ratio (diameter/height $=$ 1). Interestingly, the frequency of the varicose mode synchronizes with the first harmonic of the sinuous mode when the critical Reynolds number from three-dimensional global linear stability theory is exceeded. The coupled motion of sinuous and varicose modes is explained by frequency lock-in. This mechanism is of great importance in many aspects of nature, but has not yet received sufficient attention in the field of boundary-layer theory. A Fourier mode decomposition provides detailed analyses of sinuous and varicose modes. The observation is confirmed by a second experiment with the same aspect ratio at a different position in the laminar boundary layer. When the aspect ratio is increased, the flow is fully governed by the varicose mode. Thus, no frequency lock-in can be observed in this case. The significance of this work is to explain how sinuous and varicose modes can co-exist behind a roughness and to propose a mechanism which is well established in physics but not encountered often in boundary-layer theory.

Instability in a viscous flow driven by streamwise vortices

2001 ◽  
Vol 432 ◽  
pp. 127-166 ◽  
Author(s):  
K. W. BRINCKMAN ◽  
J. D. A. WALKER
Keyword(s):  
Boundary Layer ◽  
Numerical Solutions ◽  
Three Dimensional ◽  
Wall Layer ◽  
External Flow ◽  
Three Dimensional Flow ◽  
Dimensional Flow ◽  
Wall Flow ◽  
Turbulent Wall ◽  
Near Wall

Unsteady separation processes at large finite, Reynolds number, Re, are considered, as well as the possible relation to existing descriptions of boundary-layer separation in the limit Re → ∞. The model problem is a fundamental vortex-driven three-dimensional flow, believed to be relevant to bursting near the wall in a turbulent boundary layer. Bursting is known to be associated with streamwise vortex motion, but the vortex/wall interactions that drive the near-wall flow toward breakdown have not yet been fully identified. Here, a simulation of symmetric counter-rotating vortices is used to assess the influence of sustained pumping action on the development of a viscous wall layer. The calculated solutions describe a three-dimensional flow at finite Re that is independent of the streamwise coordinate and consists of a crossflow plane motion, with a developing streamwise flow. The unsteady problem is constructed to mimic a typical cycle in turbulent wall layers and numerical solutions are obtained over a range of Re. Recirculating eddies develop rapidly in the near-wall flow, but these eddies are eventually bisected by alleyways which open up from the external flow region to the wall. At sufficiently high Re, an oscillation was found to develop in the streamwise vorticity field near the alleyways with a concurrent evolution of a local spiky behaviour in the wall shear. Above a critical value of Re, the oscillation grows rapidly in amplitude and eventually penetrates the external flow field, suggesting the onset of an unstable wall-layer breakdown. Local zones of severely retarded streamwise velocity are computed which are reminiscent of the low-speed streaks commonly observed in turbulent boundary layers. A number of other features also bear a resemblance to observed coherent structure in the turbulent wall layer.

scholarly journals Investigation of the Three-Dimensional Flow Field Within a Transonic Fan Rotor: Experiment and Analysis

1985 ◽  
Vol 107 (2) ◽  
pp. 436-448 ◽  
Author(s):  
M. J. Pierzga ◽  
J. R. Wood
Keyword(s):  
Aspect Ratio ◽  
Flow Field ◽  
Numerical Technique ◽  
Pressure Ratio ◽  
Three Dimensional ◽  
Axial Flow ◽  
Data Matrix ◽  
Three Dimensional Flow ◽  
Dimensional Flow ◽  
Finite Volume Approach

An experimental investigation of the three-dimensional flow field through a low aspect ratio, transonic, axial-flow fan rotor has been conducted using an advanced laser anemometer (LA) system. Laser velocimeter measurements of the rotor flow field at the design operating speed and over a range of through flow conditions are compared to analytical solutions. The numerical technique used herein yields the solution to the full, three-dimensional, unsteady Euler equations using an explicit time-marching, finite volume approach. The numerical analysis, when coupled with a simplified boundary layer calculation, generally yields good agreement with the experimental data. The test rotor has an aspect ratio of 1.56, a design total pressure ratio of 1.629 and a tip relative Mach number of 1.38. The high spatial resolution of the LA data matrix (9 radial × 30 axial × 50 blade-to-blade) permits details of the transonic flow field such as shock location, turning distribution, and blade loading levels to be investigated an compared to analytical results.

Quantitative Density Visualization in a Transonic Compressor Rotor

1977 ◽  
Vol 99 (3) ◽  
pp. 460-475 ◽  
Author(s):  
A. H. Epstein
Keyword(s):  
Boundary Layer ◽  
Three Dimensional ◽  
Imaging Systems ◽  
Three Dimensional Flow ◽  
Transonic Compressor ◽  
Dimensional Flow ◽  
Compressor Rotor ◽  
Density Maps ◽  
Shock System ◽  
High Work

The flow in a 59-cm dia high work, transonic compressor rotor has been visualized using a fluorescent gas, 2,3, butanedione, as a tracer. The technique allows the three-dimensional flow to be imaged as a set of distinct planes. Quantitative static density maps were obtained by correcting the images for distortion and nonlinearities introduced by the illumination and imaging systems. These images and maps were used to analyze the three-dimensional nature of the blade’s boundary layer and shock system.

scholarly journals CROSSINN - a field experiment to study the three-dimensional flow structure in the Inn Valley, Austria

2020 ◽  
pp. 1-55 ◽  
Author(s):  
Bianca Adler ◽  
Alexander Gohm ◽  
Norbert Kalthoff ◽  
Nevio Babić ◽  
Ulrich Corsmeier ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Field Experiment ◽  
Flow Structure ◽  
State Of The Art ◽  
Three Dimensional ◽  
Dimensional Structure ◽  
Three Dimensional Flow ◽  
Three Dimensional Structure ◽  
Alpine Valley ◽  
Dimensional Flow

Capsule SummaryThe CROSSINN field experiment investigates the three-dimensional structure of thermally and dynamically driven flows and their impact on the boundary layer in a large Alpine valley using comprehensive state-of-the-art instrumentation.

Sign in / Sign up

Export Citation Format

Share Document