Some regularities in the sputtering of a thin layer of fissionable material onto a metallic substrate by fission fragments

1971 ◽  
Vol 30 (1) ◽  
pp. 55-56 ◽  
Author(s):  
V. K. Gornikov ◽  
P. A. Petrov
Keyword(s):  
Thin Layer ◽  
Metallic Substrate ◽  
Fissionable Material ◽  
Fission Fragments

Applications of Photoelectron Microscopy

1976 ◽  
Vol 34 ◽  
pp. 506-507
Author(s):  
William J. Baxter
Keyword(s):  
Electron Microscopy ◽  
Thermal Decomposition ◽  
Chemical Composition ◽  
Ultraviolet Radiation ◽  
Thin Layer ◽  
Edge Effects ◽  
Electron Optics ◽  
Surface Layers ◽  
Crystalline Orientation ◽  
Fluorescent Screen

In this form of electron microscopy, photoelectrons emitted from a metal by ultraviolet radiation are accelerated and imaged onto a fluorescent screen by conventional electron optics. image contrast is determined by spatial variations in the intensity of the photoemission. The dominant source of contrast is due to changes in the photoelectric work function, between surfaces of different crystalline orientation, or different chemical composition. Topographical variations produce a relatively weak contrast due to shadowing and edge effects.Since the photoelectrons originate from the surface layers (e.g. ∼5-10 nm for metals), photoelectron microscopy is surface sensitive. Thus to see the microstructure of a metal the thin layer (∼3 nm) of surface oxide must be removed, either by ion bombardment or by thermal decomposition in the vacuum of the microscope.

Transmission Electron Microscopic Observations of Al3Li and Al3Ti Precipitation in A Rapidly Solidified Al-3Li-0.2Ti ALLOY

1980 ◽  
Vol 38 ◽  
pp. 336-337
Author(s):  
J. E. O’Neal ◽  
K. K. Sankaran ◽  
S. M. L. Sastry
Keyword(s):  
Rapid Solidification ◽  
Metallic Substrate ◽  
Deformation Characteristics ◽  
Phase Decomposition ◽  
Electron Microscopic ◽  
Transmission Electron ◽  
Supersaturated Solid Solutions ◽  
Transmission Electron Microscopic ◽  
Rapidly Solidified ◽  
Microstructural Homogeneity

Rapid solidification of a molten, multicomponent alloy against a metallic substrate promotes greater microstructural homogeneity and greater solid solubility of alloying elements than can be achieved by slower-cooling casting methods. The supersaturated solid solutions produced by rapid solidification can be subsequently annealed to precipitate, by controlled phase decomposition, uniform 10-100 nm precipitates or dispersoids. TEM studies were made of the precipitation of metastable Al3Li(δ’) and equilibrium AL3H phases and the deformation characteristics of a rapidly solidified Al-3Li-0.2Ti alloy.

Sign in / Sign up

Export Citation Format

Share Document