Rapid determination of the shear strength of sandy soils by the vibrating probe method

1973 ◽  
Vol 10 (3) ◽  
pp. 208-210
Author(s):  
G. Z. Karandaev
Keyword(s):  
Shear Strength ◽  
Rapid Determination ◽  
Sandy Soils ◽  
Probe Method ◽  
Vibrating Probe

Vane shear strength of dewatered sludge from Hong Kong

2001 ◽  
Vol 44 (2-3) ◽  
pp. 389-397 ◽  
Author(s):  
A. Koenig ◽  
Q. H. Bari
Keyword(s):  
Shear Strength ◽  
Hong Kong ◽  
Rapid Determination ◽  
Total Solids ◽  
Volatile Solids ◽  
Vane Shear Test ◽  
Dewatered Sludge ◽  
Solids Content ◽  
Characteristic Relationship

The vane shear strength and total solids content of dewatered sludge from Hong Kong were determined in order to evaluate their geotechnical suitability for disposal in landfills. The results obtained indicate that (i) the total solids and vane shear strength of dewatered sludge from different treatment plants varied considerably depending on the type of sludge and dewatering method; and, (ii) percent total solids alone is not sufficient to guarantee geotechnical stability in terms of vane shear strength. The critical state model for soils provided a good fit for the characteristic relationship between vane shear strength and total solids, which can be used to estimate vane shear strength from total solids only. No relationship between volatile solids and vane shear strength was found. The results of the laboratory vane shear test correlated well with those obtained by a pocket shearmeter indicating the usefulness of this method for rapid determination of vane shear strength on site. Some factors that influence vane shear strength were briefly evaluated. Implications of the results for sludge management with special emphasis on dewatering and landfilling were discussed.

Weak Beam Imaging and Diffraction Studies of Stacking Faults in Silicon

1976 ◽  
Vol 34 ◽  
pp. 590-591
Author(s):  
T. Y. Tan ◽  
W. K. Tice
Keyword(s):  
Fast Neutron ◽  
Rapid Determination ◽  
Stacking Faults ◽  
Imaging Method ◽  
Large Reduction ◽  
Dislocation Loops ◽  
Fringe Spacing ◽  
Weak Beam ◽  
Kinematical Theory

In studying ion implanted semiconductors and fast neutron irradiated metals, the need for characterizing small dislocation loops having diameters of a few hundred angstrom units usually arises. The weak beam imaging method is a powerful technique for analyzing these loops. Because of the large reduction in stacking fault (SF) fringe spacing at large sg, this method allows for a rapid determination of whether the loop is faulted, and, hence, whether it is a perfect or a Frank partial loop. This method was first used by Bicknell to image small faulted loops in boron implanted silicon. He explained the fringe spacing by kinematical theory, i.e., ≃l/(Sg) in the fault fringe in depth oscillation. The fault image contrast formation mechanism is, however, really more complicated.

Methods for rapid determination of pecan (Carya illinoensis) seed viability

2017 ◽  
Vol 45 (2) ◽  
pp. 455-464
Author(s):  
T.T. Xue ◽  
J. Liu ◽  
Y.B. Shen ◽  
G.Q. Liu
Keyword(s):  
Rapid Determination ◽  
Seed Viability ◽  
Carya Illinoensis
Sign in / Sign up

Export Citation Format

Share Document