Determination of the change in effective stress during plastic deformation

1966 ◽  
Vol 16 (3) ◽  
pp. 255-258 ◽  
Author(s):  
B. Vlach
Keyword(s):  
Plastic Deformation ◽  
Effective Stress

MANUFACTURE INVESTIGATION OF CARTRIDGE WITH BOTTOM-MOST PART FLANGE BY DIRECT EXTRUSION WITH COUNTERPUNCH. REPORT 13. DETERMINATION OF DEFORMED STATE UNDER STRAITENED EXTRUSION IN FOURTH CENTRAL AREA OF PLASTIC DEFORMATION

2020 ◽  
Vol 0 (4) ◽  
pp. 43-51
Author(s):  
A. L. Vorontsov ◽  
◽  
I. A. Nikiforov ◽  
Keyword(s):  
Plastic Deformation ◽  
Plastic Flow ◽  
Central Area ◽  
Direct Extrusion ◽  
Deformed State ◽  
Cumulative Deformation ◽  
The Given ◽  
General Method

Formulae have been obtained that are necessary to calculate cumulative deformation in the process of straitened extrusion in the central area closed to the working end of the counterpunch. The general method of plastic flow proposed by A. L. Vorontsov was used. The obtained formulae allow one to determine the deformed state of a billet in any point of the given area. The formulae should be used to take into account the strengthening of the extruded material.

Formability of Explosive Welded Mg/Al Bimetallic Bar

2016 ◽  
Vol 716 ◽  
pp. 114-120 ◽  
Author(s):  
Sebastian Mróz ◽  
Piotr Szota ◽  
Teresa Bajor ◽  
Andrzej Stefanik
Keyword(s):  
Plastic Deformation ◽  
Strain Rate ◽  
Process Parameters ◽  
Metal Forming ◽  
Explosive Welding ◽  
Physical Modelling ◽  
Main Process ◽  
Compression Tests ◽  
Welding Method

The paper presents the results of physical modelling of the plastic deformation of the Mg/Al bimetallic specimens using the Gleeble 3800 simulator. The plastic deformation of Mg/Al bimetal specimens characterized by the diameter to thickness ratio equal to 1 was tested in compression tests. The aim of this work was determination of the range of parameters as temperature and strain rate that mainly influence on the plastic deformation of Mg/Al bars during metal forming processes. The tests were carried out for temperature range from 300 to 400°C for different strain rate values. The stock was round 22.5 mm-diameter with an Al layer share of 28% Mg/Al bars that had been produced using the explosive welding method. Based on the analysis of the obtained testing results it has been found that one of the main process parameters influencing the plastic deformation the bimetal components is the initial stock temperature and strain rate values.

The Experimental Determination of the Friction Stress between the Semi-Product and the Active Plate at the Multiaxial Forging of Copper

2014 ◽  
Vol 803 ◽  
pp. 216-221 ◽  
Author(s):  
Alin Marian Cazac ◽  
Mohd Mustafa Al Bakri Abdullah ◽  
Cristian Predescu ◽  
Andrei Victor Sandhu ◽  
Costică Bejinariu
Keyword(s):  
Plastic Deformation ◽  
Severe Plastic Deformation ◽  
Friction Force ◽  
Friction Stress ◽  
Severe Plastic Deformation Processing ◽  
Total Force ◽  
Finished Part ◽  
Closed Die Forging ◽  
Deformation Force

The paper aims the determination of the friction force by means of external friction stress, at the severe plastic deformation processing using cyclic closed-die forging method. It is known that the total force used at the severe plastic deformation by the method of multiaxial forging is being composed by the deformation force itself and the friction force between the semi-product and the deformation tools. Once the friction stresses known, for a certain material, one can determine the friction force corresponding for a given deformation of a semi-product of a particular shape and sizes. By means of the flowing curve of the semi-product material one can determine the deformation force, which together with the friction force give the total necessary force for a deformation and so one can choose the necessary equipment for the processing of the material by severe plastic deformation. For this purpose it has been severely plastic deformed by the method of multiaxial forging, a semi-product having the sizes 10x10x20 mm, the finished part having the same sizes and shape. It has been measured the deformation force and the extraction force of the finished part from the cavity of the active plate, the late being used for the determination of the friction stress between the semi-product and the active plate.

Research of stamping of unequal channel bars. Part 4. Deformed state of the workpiece when extruding channels. 2. Deformations under the punch end

2021 ◽  
pp. 53-57
Author(s):  
A.L. Vorontsov
Keyword(s):  
Plastic Deformation ◽  
Plane Strain ◽  
Deformation Zone ◽  
Plastic Deformation Zone ◽  
Die Forging ◽  
Deformed State

Determination of the deformed state of the workpiece at free extrusion of channels is considered. Formulas are obtained for determining the accumulated deformations at a given point of the plastic deformation zone and extruded walls of the product for any punch working stroke. Keywords: die forging, extrusion, misalignment, punch, matrix, plane strain, accumulated deformations, hardening. [email protected]

scholarly journals Stored Energy of Plastic Deformation in Tube Bending Processes

2013 ◽  
Vol 18 (1) ◽  
pp. 235-248 ◽  
Author(s):  
Z. Śloderbach ◽  
J. Pająk
Keyword(s):  
Plastic Deformation ◽  
Service Life ◽  
Plastic Strain ◽  
Analytic Method ◽  
Stored Energy ◽  
Tube Bending ◽  
Cold Bending ◽  
Tension And Compression

The paper presents an aproximate analytic method for determination of the stored energy of plastic deformation during cold bending of metal tubes at bending machines. Calculations were performed for outer points of the tube layers subjected to tension and compression (the points of maximum strains). The percentage of stored energy related to the plastic strain work was determined and the results were presented in graphs. The influence and importance of the stored energy of plastic deformation on the service life of pipeline bends are discussed.

COMPREHENSIVE INVESTIGATION OF EXTRUSION OF П-SHAPED BRACKETS. REPORT 6. KINEMATIC AND STRESSED STATES OF BLANKET DURING RESTRICTED EXTRUSION. PART 2

2021 ◽  
pp. 38-43
Author(s):  
A. L. Vorontsov ◽  
◽  
S. M. Karpov ◽  
Keyword(s):  
Plastic Deformation ◽  
Plastic Flow ◽  
Plane Deformation ◽  
Flow Theory ◽  
Equation System ◽  
Extrusion Process ◽  
Thick Wall ◽  
Comprehensive Investigation ◽  
Flow Velocities

On the basis of the complete equation system of the plastic flow theory, the solution continuation of the determination problem of the kinematic and stressed states of a blanket during restricted extrusion of П-shaped brackets under conditions of plane deformation in the general case of a nonaligned placement of the punch and the die is stated. The determination of flow velocities and stresses in the area of plastic deformation, located under the punch end near the formed thick wall of the bracket has been carried out. The formulae were obtained, which are required for identification of the main parameters of the extrusion process of П-shaped products with a relatively thin horizontal bridge.

Sign in / Sign up

Export Citation Format

Share Document