Thermal conductivity of high temperature gas mixture for lighting engineering

1981 ◽  
Vol 31 (4) ◽  
pp. 399-405 ◽  
Author(s):  
J. Maštovský ◽  
O. A. Kolenčic
Keyword(s):  
Thermal Conductivity ◽  
High Temperature ◽  
Gas Mixture ◽  
High Temperature Gas

Design of the Essential Material Test Equipment for the Pebble Bed Effective Thermal Conductivity Measurement Experiment

2013 ◽  
Author(s):  
Cheng Ren ◽  
Xing-Tuan Yang ◽  
Cong-Xin Li ◽  
Zhi-Yong Liu ◽  
Sheng-Yao Jiang
Keyword(s):  
Thermal Conductivity ◽  
High Temperature ◽  
Effective Thermal Conductivity ◽  
Reactor Core ◽  
Test Equipment ◽  
Normal Operation ◽  
Pebble Bed ◽  
Material Test ◽  
Temperature Detector ◽  
High Temperature Gas

High Temperature Gas-cooled Reactor (HTGR) is a typical representation of Generation IV nuclear power system for its advantages like inherent safety, high efficiency, widely application as high-temperature heat source. The first two 250-MWt high temperature reactor pebble bed modules (HTR-PM) have be installing at the Shidaowan plant in Shandong Province, China, which have the cylindrical core structure with thousands of spherical fuel elements randomly packed inside. The values of the effective thermal conductivity of the pebble bed core under different temperatures are essential parameters for the design of HTGR, which are needed to analyze the maximum fuel temperature, temperature distribution and residual heat releasing ability in reactor core. For this purpose, Tsinghua University in China has proposed a full-scale heat transfer experiment to conduct comprehensive thermal transfer tests in packed pebble bed and to determine the effective thermal conductivity through the pebble bed under vacuum condition and helium environment with temperature up to 1600°C. An essential material test equipment is built in advance to provide reliable materials and technical support for the design of the final experimental device aimed at measuring the effective thermal conductivity of pebble bed type reactor core of the high temperature gas-cooled reactor. The design of the essential material test equipment is introduced in detail, including the heat element, the insulation structure, the temperature detector, cooling water system, vacuum system, hydraulic lifting system, data acquisition system and so on. Several key technologies in design are described in detail. Test temperature in the equipment was elevated up to 1600°C, which covers the whole temperature range of the normal operation and accident condition of HTGR and could fully meet the test requirements of materials used in the reactor. The construction and commissioning of the test equipment shows that the test equipment has met the design requirements and verified the feasibility of the related materials and structures.

Problems with Material Tests in the High-Temperature Gas Mixture 88%H2 + 15% CO +5%CO2

1981 ◽  
Vol 72 (1) ◽  
pp. 30-35
Author(s):  
Tatsuo Shikama ◽  
Tatsuhiko Tanabe ◽  
Toshiyuki Hirano ◽  
Masakazu Fujitsuka ◽  
Yoshikazu Sakai ◽  
...  
Keyword(s):  
High Temperature ◽  
Gas Mixture ◽  
Material Tests ◽  
High Temperature Gas

An Environmental Wet Cell For High Voltage Electron Microscopy

1973 ◽  
Vol 31 ◽  
pp. 18-19
Author(s):  
N.J. Tighe ◽  
H.M. Flower ◽  
P.R. Swann
Keyword(s):  
Electron Microscopy ◽  
High Temperature ◽  
Image Quality ◽  
Inelastic Scattering ◽  
High Voltage ◽  
High Voltage Electron Microscopy ◽  
Voltage Electron ◽  
Environmental Cell ◽  
Water Saturated ◽  
High Temperature Gas

A differentially pumped environmental cell has been developed for use in the AEI EM7 million volt microscope. In the initial version the column of gas traversed by the beam was 5.5mm. This permited inclusion of a tilting hot stage in the cell for investigating high temperature gas-specimen reactions. In order to examine specimens in the wet state it was found that a pressure of approximately 400 torr of water saturated helium was needed around the specimen to prevent dehydration. Inelastic scattering by the water resulted in a sharp loss of image quality. Therefore a modified cell with an ‘airgap’ of only 1.5mm has been constructed. The shorter electron path through the gas permits examination of specimens at the necessary pressure of moist helium; the specimen can still be tilted about the side entry rod axis by ±7°C to obtain stereopairs.

DISPERSED PHASE VELOCITY IN A HIGH-TEMPERATURE GAS FLOW

2019 ◽  
Vol 23 (4) ◽  
pp. 319-328
Author(s):  
Dmitry V. Nesterovich ◽  
Oleg G. Penyazkov ◽  
Yu. A. Stankevich ◽  
M. S. Tretyak ◽  
Vladimir V. Chuprasov ◽  
...  
Keyword(s):  
High Temperature ◽  
Phase Velocity ◽  
Gas Flow ◽  
Dispersed Phase ◽  
High Temperature Gas
Sign in / Sign up

Export Citation Format

Share Document