Numerical study of liquid film cooling along an inclined plate

1993 ◽  
Vol 28 (4) ◽  
pp. 233-241 ◽  
Author(s):  
Wei-Mon Yan ◽  
Chyi-Yeou Soong
Keyword(s):  
Liquid Film ◽  
Film Cooling ◽  
Numerical Study ◽  
Inclined Plate

scholarly journals Numerical study of operational processes in a GOx-kerosene rocket engine with liquid film cooling

2020 ◽  
Vol 9 (2) ◽  
pp. 132-141
Author(s):  
Evgenij A. Strokach ◽  
Igor N. Borovik ◽  
Vladimir G. Bazarov ◽  
Oscar J. Haidn
Keyword(s):  
Liquid Film ◽  
Film Cooling ◽  
Numerical Study ◽  
Rocket Engine ◽  
Operational Processes

Numerical Study on Liquid-Film Cooling at High Pressure

2010 ◽  
Vol 58 (3) ◽  
pp. 163-186 ◽  
Author(s):  
H. W. Zhang ◽  
Y. L. He ◽  
W. Q. Tao
Keyword(s):  
High Pressure ◽  
Liquid Film ◽  
Film Cooling ◽  
Numerical Study

Experimental and numerical study of supersonic film cooling

AIAA Journal ◽  
1998 ◽  
Vol 36 ◽  
pp. 915-923 ◽  
Author(s):  
B. Aupoix ◽  
A. Mignosi ◽  
S. Viala ◽  
F. Bouvier ◽  
R. Gaillard
Keyword(s):  
Film Cooling ◽  
Numerical Study

scholarly journals Dynamics of Single Droplet Splashing on Liquid Film by Coupling FVM with VOF

Processes ◽  
2021 ◽  
Vol 9 (5) ◽  
pp. 841
Author(s):  
Yuzhen Jin ◽  
Huang Zhou ◽  
Linhang Zhu ◽  
Zeqing Li
Keyword(s):  
Liquid Film ◽  
Weber Number ◽  
Stokes Equations ◽  
Numerical Study ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Single Droplet ◽  
Navier Stokes Equations ◽  
Volume Method ◽  
The Relationship

A three-dimensional numerical study of a single droplet splashing vertically on a liquid film is presented. The numerical method is based on the finite volume method (FVM) of Navier–Stokes equations coupled with the volume of fluid (VOF) method, and the adaptive local mesh refinement technology is adopted. It enables the liquid–gas interface to be tracked more accurately, and to be less computationally expensive. The relationship between the diameter of the free rim, the height of the crown with different numbers of collision Weber, and the thickness of the liquid film is explored. The results indicate that the crown height increases as the Weber number increases, and the diameter of the crown rim is inversely proportional to the collision Weber number. It can also be concluded that the dimensionless height of the crown decreases with the increase in the thickness of the dimensionless liquid film, which has little effect on the diameter of the crown rim during its growth.

Numerical Study of the Effect of Blowing Angle on Cooling Effectiveness of an Effusion Cooling

2004 ◽  
Author(s):  
Yaping Hu ◽  
Honghu Ji
Keyword(s):  
Film Cooling ◽  
Numerical Study ◽  
Coolant Flow ◽  
Cooling Effectiveness ◽  
Absolute Value ◽  
Blowing Ratio ◽  
Conventional Film

The paper numerically investigates the influences of the blowing angle α of coolant flow on the cooling effectiveness of effusion cooling of a plate. Nine cases were studied which cover three blowing angles of α = 30°, 60°, 90° and for each angle three blowing ratios of M = 0.5, 1.0, 2.0 are calculated, respectively. The results show that with the increase of α the cooling effectiveness reduces for all the calculated cases. For the cases of α = 30° and 60° the distribution of cooling effectiveness η along the whole plate are very similar for any given blowing ratio, especially when M = 1.0 and 2.0. Whereas for the cases of α = 90°, the distributions of cooling effectiveness are quite different from other two blowing angles for a given blowing ratio, especially for M = 1.0 and in the trailing region of the plate. Although the cooling effectiveness of the cases with α = 90° for any given blowing ratio is the worst one among the three angles (α = 30°, 60°, and 90°) stated, its absolute value is still quite high comparing to the conventional film cooling.

Experimental and Numerical Study on the Effects of the Relative Position of Film Hole and Orientation Ribs on the Film Cooling With Ribbed Cross-Flow Coolant Channel

2020 ◽  
Author(s):  
Bingran Li ◽  
Cunliang Liu ◽  
Lin Ye ◽  
Huiren Zhu ◽  
Fan Zhang
Keyword(s):  
Heat Transfer ◽  
Relative Position ◽  
Film Cooling ◽  
Numerical Study ◽  
Cross Flow ◽  
Internal Cooling ◽  
Transfer Coefficients ◽  
Cooling Performance ◽  
Heat Transfer Coefficients ◽  
Numerical Studies

Abstract To investigate the application of ribbed cross-flow coolant channels with film hole effusion and the effects of the internal cooling configuration on film cooling, experimental and numerical studies are conducted on the effect of the relative position of the film holes and different orientation ribs on the film cooling performance. Three cases of the relative position of the film holes and different orientation ribs (post-rib, centered, and pre-rib) in two ribbed cross-flow channels (135° and 45° orientation ribs) are investigated. The film cooling performances are measured under three blowing ratios by the transient liquid crystal measurement technique. A RANS simulation with the realizable k-ε turbulence model and enhanced wall treatment is performed. The results show that the cooling effectiveness and the downstream heat transfer coefficient for the 135° rib are basically the same in the three position cases, and the differences between the local effectiveness average values for the three are no more than 0.04. The differences between the heat transfer coefficients are no more than 0.1. The “pre-rib” and “centered” cases are studied for the 45° rib, and the position of the structures has little effect on the film cooling performance. In the different position cases, the outlet velocity distribution of the film holes, the jet pattern and the discharge coefficient are consistent with the variation in the cross flow. The related research previously published by the authors showed that the inclination of the ribs with respect to the holes affects the film cooling performance. This study reveals that the relative positions of the ribs and holes have little effect on the film cooling performance. This paper expands and improves the study of the effect of the internal cooling configuration on film cooling and makes a significant contribution to the design and industrial application of the internal cooling channel of a turbine blade.

A Numerical Study for the Effect of Liquid Film on Soot Formation of Impinged Spray Combustion

2021 ◽  
Author(s):  
Zhihao Zhao ◽  
Xiucheng Zhu ◽  
Le Zhao ◽  
Meng Tang ◽  
Seong-Young Lee
Keyword(s):  
Liquid Film ◽  
Soot Formation ◽  
Numerical Study ◽  
Spray Combustion
Sign in / Sign up

Export Citation Format

Share Document